| Criterion | Feature |
| Rotor position sensor | Absolute single turn encoder |
| Rotary position encoder interface | EnDat 21 |
| Rotary position encoder measuring principle | Inductive |
| Temperature monitoring | PTC resistor |
| Max. speed | 5950 1/min |
| Nominal rotary speed | 4600 1/min |
| Insulation protection class | F |
| Motor constant | 0,984 Nm/A |
| Nominal motor power | 1573 W |
| Nominal voltage DC | 565 V |
| Nominal motor current | 3,3 A |
| Rotor position encoder trigger | 18 Bit |
| Phase-phase winding resistance | 2,92 Ohm |
| Phase-phase winding inductance | 8,85 mH |
| Type of winding switch | Star inside |
| Peak current | 15 A |
| Voltage constant, phase-to-phase | 59,75 mVmin |
| Rating class according to EN 60034-1 | S1 |
| CE mark (see declaration of conformity) | to EU directive for EMC
to EU directive low-voltage devices |
| Corrosion resistance classification CRC | 2 |
| Storage temperature | -20 - 60 °C |
| Relative air humidity | 0 - 90 % |
| Protection class | IP54 |
| Ambient temperature | -10 - 40 °C |
| Authorisation | RCM Mark
c UL us - Recognized (OL) |
| Overall mass moment of inertia at power take-off | 2,529 kgcm2 |
| Nominal torque | 3,24 Nm |
| Peak torque | 12,5 Nm |
| Standstill torque | 4,71 Nm |
| Permissible axial shaft load | 150 N |
| Permissible radial shaft load | 300 N |
| Product weight | 4800 g |
| Electrical connector system | Plug |
| Materials note | Conforms to RoHS |
| Conforms to standard | IEC 60034 |
