AB9077-C HMS Networks Industrial Automation Components

Anybus by HMS Networks AB9077-C is a gateway designed for the .NET bridge series, serving as an IIoT gateway with a USB port for firmware upgrades. It is intended for horizontal installation up to an altitude of 2000m and features galvanic isolation on both the BUS/Ethernet side (sub-network side). The device is built to withstand the immunity and emission standards of an industrial environment, including electrostatic discharge of +/-4kV, electromagnetic RF fields ranging from 1V/m at 2.0GHz-2.7GHz to 10V/m at 80MHz-1GHz, fast transients and surge protection of +/-1kV, RF conducted interference at 10V/rms, and emission levels of 40dB at 30MHz-230MHz to 47dB at 30MHz-1GHz. It includes 1 x SD card slot, operates as a Anybus PROFINET to .NET Bridge, and is equipped with 8 x LED indicators. The supply voltage requirement is 21.6-26.4Vdc (24Vdc nom.), and it has dimensions of H110mm x W35mm x D101mm with a plastic housing made of ABS/PC. Connection options include 2 x RJ45 connectors for 100Mbit/s PROFINET, 1 x 3-poles 5.08mm plug-in screw connector for power, and 1 x USB type-B connector. It offers an IP20 NEMA 1 degree of protection and can be mounted on a DIN rail or wall. The communication protocol supported is PROFINET. It operates within an ambient air temperature range of -25 to +70°C, has a typical current consumption of 150mA, and includes protection functions against reverse voltage and short-circuit. The device is designed to operate in environments with 5-95% relative humidity (non-condensing) and can store in temperatures ranging from -40 to +85°C. The speed supported is 100Mbit/s for PROFINET communications.