750-375 WAGO Industrial Automation Components

Wago 750-375 is a Remote I/O controller designed for various industrial applications. It functions as a fieldbus coupler and a head remote I/O (RIO) controller unit, featuring topology detection, LLDP, network diagnostics, SNMP, MIB-2, media redundancy, MRP, webserver, HTTP, and shared device protocols. This unit requires a supply voltage of 24Vdc via wiring for the system and an additional 24Vdc via a power jumper for the field. It offers connectivity through 2 x RJ45 connectors for the fieldbus, push-in spring cage-clamp for power supply connections, and a 4-pin male connector for device configuration. The design is specified as Gen.3, with an ambient air temperature for operation ranging from C to +55°C and for storage from C to +85°C. The control voltage (DC), rated voltage (AC), and communication speed are designed for 10Mbit/s (Ethernet) and 100Mbit/s full duplex (PROFINET IO) operations. It has an IP20 degree of protection, a net width of 61.5 mm, and is mounted on a DIN-35 rail. The housing is made of Polycarbonate (PC) / Polyamide (PA) 6.6, ensuring durability. It can connect up to 250 x connections per node and 64 x field devices. The primary voltage showcases vibration resistance according to EN 60068-2-6 -- 4g and shock resistance according to EN 60068-2-27 --15g. The unit's power consumption is 500mA at 24Vdc at nominal load, 450mA at 5Vdc for the system supply, and 1700mA for the system supply, with a response time housed in dimensions of H100mm x W61.5mm x D71.9mm. It is designed to operate in environments with up to 95% relative humidity (RH), non-condensing.