RSM RKM 5723-11.5M

Turck

RSM RKM 5723-11.5M Turck - RSM RKM 5723-11.5M DeviceNet™ Cordset, Extension Cordset

0 in stock

ATV212HD75N4

Schneider Electric

Schneider Electric ATV212HD75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series, designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C2 / class C3) and a built-in heatsink. The supply voltage ranges from 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. This model has dimensions of H605mm x W320mm x D290mm and offers an IP21 UL type 1 degree of protection. It is rated for a current of 160A at 480Vac (75kW) and can handle a maximum current of 111.3A for 60 seconds. Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Metasys N2, Apogee FLN, and BACnet, supporting a 3-phase network with an output frequency range of 0.5-200 Hz. It provides 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), and 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), along with 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 141.8A at 380Vac and 111.3A at 480Vac, with a rated active power of 75kW (100HP) and power dissipation/losses of 1945 W.

0 in stock

TBPN-L5-4FDI-4FDX

Turck

TBPN-L5-4FDI-4FDX Turck - TBPN-L5-4FDI-4FDX Compact PROFIsafe / PROFINET Block I/O Module, Safe Digital Inputs and Outputs

0 in stock

M-3431-6.3S

Novanta IMS

Novanta IMS M-3431-6.3S is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a smooth-shaft design with a single flat on one shaft end and double motor stack. It is equipped with bare end flying leads for connection, and operates at a rated current of 6.3A with a supply voltage range of 24Vdc to 75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is designed for mounting with an 85x85mm flange and can operate within an ambient air temperature range of -25 to +40°C. It has a moment of inertia of 1.35kg.cm^2 and provides a stall torque of 405N.cm (574oz-in). The motor is designed for storage in temperatures ranging from -25 to +70°C and offers a resolution of 1.8° step angle.

0 in stock

221-2401

WAGO

221-2401 WAGO - Inline splicing connector with lever; for all conductor types; 12 AWG (max.); 2-conductor; transparent housing; white cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent

3569 in stock

UIA-0800N

Unitronics

UIA-0800N Unitronics - UniStream™ I/O: 8 analog inputs (not isolated)

0 in stock

ATV340D11N4E

Schneider Electric

Schneider Electric ATV340D11N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless voltage vector control, current vector control with sensor, and Master/Slave daisy chain through PTO/PTI for MachineStruxure integration in SoMachine. It operates in velocity mode and torque control, offering 220% Tn in open or closed loop control, dynamic motor control performance (up to 400Hz speed bandwidth), and cyclic application task (1ms) with an energy-saving mode. The design includes a built-in EMC filter (class C3) and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm and an IP20 degree of protection. The rated current is 32A (normal-duty; 4kHz), 24A (heavy-duty; 4kHz), with a maximum current of 43A (normal-duty; for 2s), 43A (heavy-duty; for 2s), and 35.2A (normal-duty; for 60s), 36A (heavy-duty; for 60s). It supports cabinet mounting, Ethernet/IP, Modbus TCP communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 x analog output, 5 x digital inputs, 2 x digital outputs programmable as inputs or outputs, 1 x digital output (C/O SPDT relay contact), 1 x digital output (NO relay contact), and 2 x analog inputs. The current consumption is 34A (380Vac; normal-duty), 27.3A (480Vac; normal-duty), 34.7A (380Vac; heavy-duty), 27.7A (480Vac; heavy-duty), with a rated active power of 15kW (normal-duty), 11kW (heavy-duty), and rated power of 20HP (normal-duty), 15HP (heavy-duty).

0 in stock

EZM31600JCBC

Schneider Electric

Square D by Schneider Electric EZM31600JCBC is a meter center main unit designed for surface mounting. It features a steel enclosure and aluminium/copper busbars, ensuring compatibility with various installation requirements. This unit is protected to a NEMA 3R degree, making it suitable for both indoor and rainproof applications. With dimensions of H1745mm x W767mm x D466mm (H68.7" x W30.19" x D18.33"), it supports a rated voltage of 208Y/120Vac and 240/120Vac (Delta) across a three-phase (3PH-4W) network. The EZM31600JCBC is pre-equipped with an incoming breaker, offering a main rated current of 1600A and a busbar rated current of 1200A. It accommodates a wide range of cross-sections for aluminium/copper lugs, including 1 x 6AWG...300kcmil for ground and multiple configurations for line and neutral connections, specifically 6 x 1/0AWG...750kcmil, 12 x 1/0AWG...250kcmil for both line and neutral.

0 in stock

RSM RKM 5723-11.5M

Turck

RSM RKM 5723-11.5M Turck - RSM RKM 5723-11.5M DeviceNet™ Cordset, Extension Cordset

0 in stock

ATV212HD75N4

Schneider Electric

Schneider Electric ATV212HD75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series, designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C2 / class C3) and a built-in heatsink. The supply voltage ranges from 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. This model has dimensions of H605mm x W320mm x D290mm and offers an IP21 UL type 1 degree of protection. It is rated for a current of 160A at 480Vac (75kW) and can handle a maximum current of 111.3A for 60 seconds. Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Metasys N2, Apogee FLN, and BACnet, supporting a 3-phase network with an output frequency range of 0.5-200 Hz. It provides 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), and 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), along with 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 141.8A at 380Vac and 111.3A at 480Vac, with a rated active power of 75kW (100HP) and power dissipation/losses of 1945 W.

0 in stock

TBPN-L5-4FDI-4FDX

Turck

TBPN-L5-4FDI-4FDX Turck - TBPN-L5-4FDI-4FDX Compact PROFIsafe / PROFINET Block I/O Module, Safe Digital Inputs and Outputs

0 in stock

M-3431-6.3S

Novanta IMS

Novanta IMS M-3431-6.3S is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a smooth-shaft design with a single flat on one shaft end and double motor stack. It is equipped with bare end flying leads for connection, and operates at a rated current of 6.3A with a supply voltage range of 24Vdc to 75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is designed for mounting with an 85x85mm flange and can operate within an ambient air temperature range of -25 to +40°C. It has a moment of inertia of 1.35kg.cm^2 and provides a stall torque of 405N.cm (574oz-in). The motor is designed for storage in temperatures ranging from -25 to +70°C and offers a resolution of 1.8° step angle.

0 in stock

221-2401

WAGO

221-2401 WAGO - Inline splicing connector with lever; for all conductor types; 12 AWG (max.); 2-conductor; transparent housing; white cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent

3569 in stock

UIA-0800N

Unitronics

UIA-0800N Unitronics - UniStream™ I/O: 8 analog inputs (not isolated)

0 in stock

ATV340D11N4E

Schneider Electric

Schneider Electric ATV340D11N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless voltage vector control, current vector control with sensor, and Master/Slave daisy chain through PTO/PTI for MachineStruxure integration in SoMachine. It operates in velocity mode and torque control, offering 220% Tn in open or closed loop control, dynamic motor control performance (up to 400Hz speed bandwidth), and cyclic application task (1ms) with an energy-saving mode. The design includes a built-in EMC filter (class C3) and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm and an IP20 degree of protection. The rated current is 32A (normal-duty; 4kHz), 24A (heavy-duty; 4kHz), with a maximum current of 43A (normal-duty; for 2s), 43A (heavy-duty; for 2s), and 35.2A (normal-duty; for 60s), 36A (heavy-duty; for 60s). It supports cabinet mounting, Ethernet/IP, Modbus TCP communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 x analog output, 5 x digital inputs, 2 x digital outputs programmable as inputs or outputs, 1 x digital output (C/O SPDT relay contact), 1 x digital output (NO relay contact), and 2 x analog inputs. The current consumption is 34A (380Vac; normal-duty), 27.3A (480Vac; normal-duty), 34.7A (380Vac; heavy-duty), 27.7A (480Vac; heavy-duty), with a rated active power of 15kW (normal-duty), 11kW (heavy-duty), and rated power of 20HP (normal-duty), 15HP (heavy-duty).

0 in stock

EZM31600JCBC

Schneider Electric

Square D by Schneider Electric EZM31600JCBC is a meter center main unit designed for surface mounting. It features a steel enclosure and aluminium/copper busbars, ensuring compatibility with various installation requirements. This unit is protected to a NEMA 3R degree, making it suitable for both indoor and rainproof applications. With dimensions of H1745mm x W767mm x D466mm (H68.7" x W30.19" x D18.33"), it supports a rated voltage of 208Y/120Vac and 240/120Vac (Delta) across a three-phase (3PH-4W) network. The EZM31600JCBC is pre-equipped with an incoming breaker, offering a main rated current of 1600A and a busbar rated current of 1200A. It accommodates a wide range of cross-sections for aluminium/copper lugs, including 1 x 6AWG...300kcmil for ground and multiple configurations for line and neutral connections, specifically 6 x 1/0AWG...750kcmil, 12 x 1/0AWG...250kcmil for both line and neutral.

0 in stock

RSM RKM 5723-11.5M

Turck

RSM RKM 5723-11.5M Turck - RSM RKM 5723-11.5M DeviceNet™ Cordset, Extension Cordset

0 in stock

ATV212HD75N4

Schneider Electric

Schneider Electric ATV212HD75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series, designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C2 / class C3) and a built-in heatsink. The supply voltage ranges from 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. This model has dimensions of H605mm x W320mm x D290mm and offers an IP21 UL type 1 degree of protection. It is rated for a current of 160A at 480Vac (75kW) and can handle a maximum current of 111.3A for 60 seconds. Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Metasys N2, Apogee FLN, and BACnet, supporting a 3-phase network with an output frequency range of 0.5-200 Hz. It provides 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), and 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), along with 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 141.8A at 380Vac and 111.3A at 480Vac, with a rated active power of 75kW (100HP) and power dissipation/losses of 1945 W.

0 in stock

TBPN-L5-4FDI-4FDX

Turck

TBPN-L5-4FDI-4FDX Turck - TBPN-L5-4FDI-4FDX Compact PROFIsafe / PROFINET Block I/O Module, Safe Digital Inputs and Outputs

0 in stock

M-3431-6.3S

Novanta IMS

Novanta IMS M-3431-6.3S is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a smooth-shaft design with a single flat on one shaft end and double motor stack. It is equipped with bare end flying leads for connection, and operates at a rated current of 6.3A with a supply voltage range of 24Vdc to 75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is designed for mounting with an 85x85mm flange and can operate within an ambient air temperature range of -25 to +40°C. It has a moment of inertia of 1.35kg.cm^2 and provides a stall torque of 405N.cm (574oz-in). The motor is designed for storage in temperatures ranging from -25 to +70°C and offers a resolution of 1.8° step angle.

0 in stock

563720 Eriflex Power Distribution Blocks

Part#:563720

Alt. Part#:BD-40A

Manufacturer:Eriflex

Category:Power Distribution Blocks

Product description

Product condition

Similar products from: Eriflex Power Distribution Blocks

569208

Eriflex

569251

Eriflex

569201

Eriflex

569252

Eriflex

569202

Eriflex

569204

Eriflex

563720 Eriflex

$51.57

About the manufacturer

Recently viewed products

221-2401

WAGO

UIA-0800N

Unitronics

ATV340D11N4E

Schneider Electric

EZM31600JCBC

Schneider Electric

Relevant products

563770

563780

563760

563740

534409

FAQ

Price

Price

In-stock availability

In-stock availability

Product Details

Product Details

Similar products from: Power Distribution Blocks

569208

569251

569201

569252

Recommended parts

ZB4BS84430

Schneider Electric

NLGF36400CU31X

Schneider Electric

159596

Festo

EE-SX872P

Omron

CUCSR1

Pneumatic Cylinders