1574710 Festo Servo Motors

Product Details

• Rotor position sensor resolution
  19 bit
• Type of winding switch
  Star inside
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Peak torque
  67.5 Nm
• Stall torque
  25.5 Nm
• Conforms to standard
  IEC 60034
• Electrical connection technology
  Plug
• Number of pole pairs
  6
• Rotor position sensor measuring principle
  Inductive
• Brake power consumption
  15.6 W
• Insulation protection class
  F
• Phase-phase winding resistance
  0.586 Ohm
• Rating class according to EN 60034-1
  S1
• Relative air humidity
  0 - 90 %
• Nominal torque
  17.41 Nm
• Permissible radial shaft load
  1060 N
• Rotor position sensor interface
  EnDat® 22
• Max. rotational speed
  3830 1/min
• Brake DC operating voltage
  24 V
• Motor nominal current
  9.96 A
Peak current
51.5 A
Storage temperature
-20 °C ... 60 °C
Ambient temperature
-10 °C ... 40 °C
Permissible axial shaft load
200 N
MTTFd, subcomponent
152 years, rotor position sensor
Product weight
17000 g
Rotor position sensor
Absolute encoder, multi-turn
Nominal rotary speed
2800 1/min
Motor constants
1.75 Nm/A
Motor nominal power
5110 W
Winding inductance phase-phase
4.65 mH
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Degree of protection
IP65
Certification
RCM compliance mark c UL us - Recognized (OL)
Type code
EMMS-AS
Temperature monitoring
PTC resistor
DC nominal voltage
565 V
Voltage constant, phase-to-phase
104.41 mVmin
Total output inertia moment
20.108 kgcm²
Brake holding torque
18 Nm
Brake mass moment of inertia
1.2 kgcm²
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Featherkey shaft design
DIN 6885 A 8 x 7 x 40
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Note on materials
RoHS-compliant

1574710 Related Documents