2093138 Festo Servo Motors

Product Details

• Rotor position sensor
  Absolute encoder, single-turn
• Brake power consumption
  12 W
• DC nominal voltage
  565 V
• Phase-phase winding resistance
  14.2 Ohm
• Voltage constant, phase-to-phase
  95.3 mVmin
• Ambient temperature
  -10 °C ... 40 °C
• Nominal torque
  2.3 Nm
• Conforms to standard
  IEC 60034
• Number of pole pairs
  3
• Rotor position sensor interface
  HIPERFACE®
• Max. rotational speed
  4192 1/min
• Continuous stall current
  1.8 A
• MTTFd, subcomponent
  340 years, rotor position sensor
• Nominal rotary speed
  3000 1/min
• Motor constants
  1.438 Nm/A
• Motor nominal power
  720 W
• Rotor position encoder, typical angular accuracy
  20 arcmin
• Winding inductance phase-phase
  30 mH
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Storage temperature
  -20 °C ... 70 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Permissible radial shaft load
350 N
Stall torque
2.8 Nm
Electrical connection technology
Plug
Type code
EMME-AS
Insulation protection class
F
Motor nominal current
1.6 A
Peak current
7.2 A
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP21
Total output inertia moment
1.68 kgcm²
Peak torque
11.2 Nm
Permissible axial shaft load
70 N
Product weight
3700 g
Rotor position sensor measuring principle
Capacitive
Brake DC operating voltage
24 V
Nominal operating voltage DC
565 V
Typical rotor position sensor resolution
12 bit
Rotor position encoder, sinusoidal/cosinusoidal periods per revolution
16
Type of winding switch
Star inside
Rating class according to EN 60034-1
S1
Relative air humidity
0 - 90 %
Brake holding torque
4.5 Nm
Brake mass moment of inertia
0.222 kgcm²
MTTF, subcomponent
797 years, holding brake
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Note on materials
Contains paint-wetting impairment substances RoHS-compliant

2093138 Related Documents