2126636 Festo Pneumatic Actuators

Name: 2126636
Brand: Festo

Part#:2126636

Alt. Part#:DSBC-80-20-PPSA-N3

Manufacturer:Festo

Category:Pneumatic Actuators

Product Lifecycle:Active

Product description

standards-based cylinder DSBC-80-20-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 20 mm, Piston diameter: 80 mm, Piston rod thread: M20x1,5, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: Any

Product Details

Material of piston
Wrought aluminum alloy
Cushioning
Self-adjusting pneumatic end-position cushioning
Variants
Piston rod at one end
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Theoretical force at 6 bar, retracting
2721 N
Additional weight per 10 mm stroke
92 g
Cover material
Die-cast aluminum, coated
Piston seal material
TPE-U(PU)
Nut material
Steel, galvanized
Piston rod thread
M20x1.5
Position sensing
For proximity sensor
Theoretical force at 6 bar, advancing
3016 N
Cushioning length
31 mm
Note on materials
RoHS-compliant
Material of cylinder barrel
Wrought aluminum alloy, smooth-anodized
Cushion piston material
POM
Material of bearing
POM
Piston diameter
80 mm
Piston rod end
External thread
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]

Corrosion resistance class (CRC)

2 - Moderate corrosion stress

Basic weight with 0 mm stroke

2660 g

Moving mass at 0 mm stroke

810 g

Flange screws material

Steel, galvanized

Type code

DSBC

Conforms to standard

ISO 15552

Symbol

00992970

Mode of operation

Double-acting

Ambient temperature

-20 °C ... 80 °C

Pneumatic connection

G3/8

Piston rod material

High-alloy steel

Piston rod wiper seal material

TPE-U(PU)

Buffer seal material

TPE-U(PU)

Stroke

20 mm

Mounting position

Any

Design

Piston Profile barrel

Operating pressure

0.04 MPa ... 1.2 MPa

Impact energy in the end positions

1.8 J

Additional moving mass per 10 mm stroke

39 g

Type of mounting

Optionally: With accessories

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

2126636 Related Documents

2126636 DataSheet.pdf

Similar products from: Festo Pneumatic Actuators

536287

Festo

compact cylinder ADN-32-80-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 80 mm, Piston diameter: 32 mm, Piston rod thread: M8, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock

163403

Festo

standards-based cylinder DNC-63-50-PPV-A As per ISO 15552, with profile cylinder barrel, for proximity sensing, with adjustable cushioning at both end positions. Stroke: 50 mm, Piston diameter: 63 mm, Piston rod thread: M16x1,5, Cushioning: PPV: Pneumatic

1 in stock

1804669

Festo

standards-based cylinder DSBC-125-250-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 250 mm, Piston diameter: 125 mm, Piston rod thread: M27x2, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: An

6 in stock

536248

Festo

compact cylinder ADN-20-40-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 40 mm, Piston diameter: 20 mm, Piston rod thread: M6, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock

164043

Festo

flat cylinder DZF-32-80-P-A Non-rotating, for position sensing, with elastic cushioning rings in end positions. Various mounting options, with or without additional mounting components. Stroke: 80 mm, Piston diameter: (* 32 mm, * Equivalent diameter), Max

1 in stock

170860

Festo

guided drive DFM-32-100-P-A-GF With integrated guide. Centre of gravity distance from working load to yoke plate: 50 mm, Stroke: 100 mm, Piston diameter: 32 mm, Operating mode of drive unit: Yoke, Cushioning: P: Flexible cushioning rings/plates at both en

2 in stock

Manufacturer warranty

2126636 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 2126636 with other Pneumatic Actuators products

Material of piston

Cushioning

Variants

Information on operating ...

Theoretical force at 6 ba...

Additional weight per 10 ...

Cover material

Piston seal material

Nut material

Piston rod thread

Selected product

Backordered

2126636

Festo

standards-based cylinder DSBC-80-20-PPSA-N3 with self-adjusting pneumatic end position cushioning St...

Material of pistonWrought aluminum alloy

CushioningSelf-adjusting pneumatic end...

VariantsPiston rod at one end

Information on operating and pilot mediaOperation with oil lubricati...

Theoretical force at 6 bar, retracting2721 N

Additional weight per 10 mm stroke92 g

Cover materialDie-cast aluminum, coated

Piston seal materialTPE-U(PU)

Nut materialSteel, galvanized

Piston rod threadM20x1.5

6 in stock

1804669

Festo

standards-based cylinder DSBC-125-250-PPSA-N3 with self-adjusting pneumatic end position cushioning ...

Material of pistonWrought aluminum alloy

Cushioning-

Variants-

Information on operating and pilot media-

Theoretical force at 6 bar, retracting-

Additional weight per 10 mm stroke-

Cover material-

Piston seal materialTPE-U(PU)

Nut materialSteel, galvanized

Piston rod threadM27x2

1 in stock

1383341

Festo

standards-based cylinder DSBC-80-250-PPVA-N3 With adjustable cushioning at both ends. Stroke: 250 mm...

Material of pistonWrought aluminum alloy

Cushioning-

Variants-

Information on operating and pilot media-

Theoretical force at 6 bar, retracting-

Additional weight per 10 mm stroke-

Cover material-

Piston seal materialTPE-U(PU)

Nut materialSteel, galvanized

Piston rod threadM20x1.5

6 in stock

1804669

Festo

standards-based cylinder DSBC-125-250-PPSA-N3 with self-adjusting pneumatic end position cushioning ...

Material of pistonWrought aluminum alloy

Cushioning-

Variants-

Information on operating and pilot media-

Theoretical force at 6 bar, retracting-

Additional weight per 10 mm stroke-

Cover material-

Piston seal materialTPE-U(PU)

Nut materialSteel, galvanized

Piston rod threadM27x2

1 in stock

1383341

Festo

standards-based cylinder DSBC-80-250-PPVA-N3 With adjustable cushioning at both ends. Stroke: 250 mm...

Material of pistonWrought aluminum alloy

Cushioning-

Variants-

Information on operating and pilot media-

Theoretical force at 6 bar, retracting-

Additional weight per 10 mm stroke-

Cover material-

Piston seal materialTPE-U(PU)

Nut materialSteel, galvanized

Piston rod threadM20x1.5

6 in stock

1804669

Festo

standards-based cylinder DSBC-125-250-PPSA-N3 with self-adjusting pneumatic end position cushioning ...

Material of pistonWrought aluminum alloy

Cushioning-

Variants-

Information on operating and pilot media-

Theoretical force at 6 bar, retracting-

Additional weight per 10 mm stroke-

Cover material-

Piston seal materialTPE-U(PU)

Nut materialSteel, galvanized

Piston rod threadM27x2

About the manufacturer

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

Recently viewed products

MDI1FRL17C4-EQ-N

Novanta IMS

Novanta IMS MDI1FRL17C4-EQ-N is a stepper motor that features an integrated driver and operates as a 2-phase DC stepper motor. It is designed with an external single-end 512-line optical encoder, a rear control knob, and a triple motor stack in its Plus version, which includes standard features. This part offers a connection through 30cm / 12" bare end flying leads and a 10-pin friction-lock wire crimp connector. It supports RS-422 and RS-485 communication protocols. The supply voltage required for operation ranges from 12Vdc to 48Vdc, with an optimal performance at 24Vdc. It is mounted via a 42x42mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDI1FRL17C4-EQ-N has an IP20 degree of protection, a moment of inertia of 0.082kg.cm^2, a stall torque of 53N.cm, and offers a resolution of 1.8° step angle.

0 in stock

SF210

Lenze

Lenze SF210 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter designed for precise control of motor speed and frequency. It features dimensions of H146mm x W73mm x D120mm and operates on a supply voltage of 200Vac-240Vac, supporting 208Vac, 220Vac, and 230Vac inputs. The rated current is 4.8A at 200Vac and 4.2A at 230Vac. This device can be mounted in a cabinet or on a DIN rail and is designed to operate within an ambient air temperature range of 0 to +50°C, with a derating of 2.5% per °C above +50°C. It utilizes an RS-485 communication protocol and operates with a network frequency of 48-62 Hz on input and 0-240 Hz on output. The SF210 includes 2 digital outputs (open-collector outputs; 50mA at 30Vdc), 2 analog inputs (1 x 0-10Vdc and 1 x 4-20mA), and 2 analog outputs (both 0-10Vdc or adjustable within specified ranges), suitable for various control applications. It supports a 3-phase network and delivers a rated active power of 0.75kW and a rated power of 1HP at 208-240Vac.

0 in stock

MDI1PRL23B7-EQ-N

Novanta IMS

Novanta IMS MDI1PRL23B7-EQ-N is a stepper motor that features an integrated driver and operates as a 2-phase DC stepper motor. It is designed with an external single-end 512-line optical encoder, a rear control knob, and a double motor stack in its Plus version, which includes standard features. The connection is facilitated through a non-locking spring-clamp connector and a 10-pin friction-lock wire crimp connector. It supports RS-422 and RS-485 communication protocols. The motor operates on a supply voltage range of 12Vdc to 75Vdc, with recommended voltages at 24Vdc, 48Vdc, and 72Vdc. It is mounted via a 57x57mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The stepper motor is rated with a degree of protection IP20, has a moment of inertia of 0.26kg.cm^2, a stall torque of 102N.cm, and offers a resolution of 1.8° step angle.

0 in stock

S15CM-PF-IQ

Banner

S15C Series: In-Line Converter; Voltage: 12-30 V dc; IP67; Female: PFM Output ; Male: Analog 4-20 mA Input; Male-Female 4-pin M12 QD

0 in stock

NI15-M30-Y1X-H1141

Turck

NI15-M30-Y1X-H1141 Turck - NI15-M30-Y1X-H1141 Inductive Sensor

0 in stock

542600

Festo

on-off valve MS4-EE-1/8-10V24-S Electrical, with silencer, direction of flow: from left to right Design structure: Piston slide, Type of actuation: electrical, Exhaust-air function: not throttleable, Manual override: Pushing, Type of reset: mechanical spr

0 in stock

MDI1FRL17C4-EQ-N

Novanta IMS

0 in stock

SF210

Lenze

0 in stock

MDI1PRL23B7-EQ-N

Novanta IMS

0 in stock

MDI1FRL17C4-EQ-N

Novanta IMS

0 in stock

SF210

Lenze

0 in stock

Relevant products

2126688

Verified stock: 0

standards-based cylinder DSBC-63-150-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 150 mm, Piston diameter: 63 mm, Piston rod thread: M16x1,5, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: An

Festo

2126641

Verified stock: 0

standards-based cylinder DSBC-80-300-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 300 mm, Piston diameter: 80 mm, Piston rod thread: M20x1,5, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: An

Festo

2126594

Verified stock: 0

standards-based cylinder DSBC-80-20-PPVA-N3 With adjustable cushioning at both ends. Stroke: 20 mm, Piston diameter: 80 mm, Piston rod thread: M20x1,5, Cushioning: PPV: Pneumatic cushioning adjustable at both ends, Assembly position: Any

Festo

2126640

Verified stock: 0

standards-based cylinder DSBC-80-150-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 150 mm, Piston diameter: 80 mm, Piston rod thread: M20x1,5, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: An

Festo

2126638

Verified stock: 0

standards-based cylinder DSBC-80-60-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 60 mm, Piston diameter: 80 mm, Piston rod thread: M20x1,5, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: Any

Festo

FAQ

Out if stock but available for backorder.

Recommended parts

ESV752N02TXB

Lenze

ESV752N02TXB Lenze Variable Frequency Drive (VFD) - The SMV 10.0 hp (7.5 kW) drive features a 208 / 240 VAC 3Ø input in a fan cooled NEMA 1 (IP31) indoor enclosure. The SMVector NEMA 1 (IP31) is a compact and cost effective drive for a wide range of AC motor applications demanding dynamic speed and torque control. The SMVector NEMA 1 (IP31) is available in power ranges from 0.33...60.0 hp (0.25 kW...45.0 kW) and global voltages from 120 VAC...600 VAC.

1 in stock

FKFD 4.4-2/S613

Turck

FKFD 4.4-2/S613 Turck - FKFD 4.4-2/S613 Actuator and Sensor Receptacle, Rear Mount

1 in stock

159596

Festo

flanged pressure gauge FMA-40-10-1/4-EN With display unit in bar and psi. Indicating range [bar]: 0 - 10 bar, Conforms to standard: EN 837-1, Nominal size of pressure gauge: 40, Design structure: Bourdon-tube pressure gauge, Mounting type: Front panel ins

1 in stock

NLGF36400CU31X

Schneider Electric

PowerPact L-Frame Circuit Breaker

1 in stock

HGH-20-CA-Z0-C

Hiwin

BEARING, LINEAR 20 MM

1 in stock

MFKB 4 (500/BAG)

Turck

MFKB 4 (500/BAG) Turck - MFKB 4 (500/BAG)

1 in stock

ESV752N02TXB

Lenze

1 in stock

ESV752N02TXB

Lenze

1 in stock

2126636 Festo Pneumatic Actuators

Part#:2126636

Alt. Part#:DSBC-80-20-PPSA-N3

Manufacturer:Festo

Category:Pneumatic Actuators

Product description

Product Details

Product condition

2126636 Related Documents

Similar products from: Festo Pneumatic Actuators

536287

Festo

163403

Festo

1804669

Festo

536248

Festo

164043

Festo

170860

Festo

2126636 Festo

Compare 2126636 with other Pneumatic Actuators products

2126636

Festo

1383341

Festo

1804669

Festo

About the manufacturer

Recently viewed products

MDI1PRL23B7-EQ-N

Novanta IMS

S15CM-PF-IQ

Banner

NI15-M30-Y1X-H1141

Turck

542600

Festo

Relevant products

2126688

2126641

2126594

2126640

2126638

FAQ

In-stock availability

In-stock availability

Product Details

Product Details

Similar products from: Pneumatic Actuators

536287

163403

1804669

536248

Recommended parts

FKFD 4.4-2/S613

Turck

159596

Festo

NLGF36400CU31X

Schneider Electric

HGH-20-CA-Z0-C

Hiwin

MFKB 4 (500/BAG)

Turck