Powermatic Associates Logo

557202 Festo Pneumatic Actuators

557202 on Powermatic Associates
Festo

Part#:557202

Alt. Part#:ADNGF-1/2"-1"-P-A

Manufacturer:Festo

Category:Pneumatic Actuators

Product Lifecycle:Active

Product description

compact cylinder ADNGF-1/2"-1"-P-A According to ISO 21287, with plain-bearing guide, piston rod secured against rotation by means of guide rods and yoke plate. Stroke: 1 ", Piston diameter: 1/2", Based on the standard: ISO 21287, Cushioning: P: Flexible c

Product Details

  • Material of dynamic seals
    TPE-U(PU)
  • Based on norm
    ISO 21287
  • Operating pressure
    0.1 MPa ... 1 MPa
  • Information on operating and pilot media
    Operation with oil lubrication possible (required for further use)
  • Theoretical force at 6 bar, advancing
    68 N
  • Type of mounting
    Optionally: With accessories
  • Flange screws material
    Steel
  • Piston diameter
    1/2"
  • Mounting position
    Any
  • Mode of operation
    Double-acting
  • Ambient temperature
    -20 °C ... 80 °C
  • Moving mass at 0 mm stroke
    22.085 g
  • Basic weight with 0 mm stroke
    90.323 g
  • Cover material
    Wrought aluminum alloy Anodized
  • Stroke
    25.4 mm
  • Cushioning
    Elastic cushioning rings/pads at both ends
  • Protection against torsion/guide
    Guide rod with yoke
  • Corrosion resistance class (CRC)
    2 - Moderate corrosion stress
  • Theoretical force at 6 bar, retracting
    50.999 N
  • Additional weight per 10 mm stroke
    4.026 g
  • Pneumatic connection
    10-32 UNF-2B
  • Piston rod material
    High-alloy steel
  • Type code
    ADNGF
  • Design
    Piston Profile barrel
  • Position sensing
    For proximity sensor
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:4:4]
  • Impact energy in the end positions
    0.0705 J
  • Additional moving mass per 10 mm stroke
    14.062 g
  • Seals material
    NBR
  • Material of cylinder barrel
    Wrought aluminum alloy Smooth anodized

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

557202 Related Documents

557202 DataSheet.pdf

Similar products from: Festo Pneumatic Actuators

536287 on Powermatic Associates

536287

Festo

compact cylinder ADN-32-80-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 80 mm, Piston diameter: 32 mm, Piston rod thread: M8, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock
163403 on Powermatic Associates

163403

Festo

standards-based cylinder DNC-63-50-PPV-A As per ISO 15552, with profile cylinder barrel, for proximity sensing, with adjustable cushioning at both end positions. Stroke: 50 mm, Piston diameter: 63 mm, Piston rod thread: M16x1,5, Cushioning: PPV: Pneumatic

1 in stock
544034 on Powermatic Associates

544034

Festo

mini slide DGSL-25-50-PA With position sensing, highly accurate, durable ball-cage guide, flexible damping on both sides without metallic end position (P). Stroke: 50 mm, Adjustable endposition range/front length: 55 mm, Adjustable endposition range/rear

1 in stock
1804669 on Powermatic Associates

1804669

Festo

standards-based cylinder DSBC-125-250-PPSA-N3 with self-adjusting pneumatic end position cushioning Stroke: 250 mm, Piston diameter: 125 mm, Piston rod thread: M27x2, Cushioning: PPS: Self-adjusting pneumatic end-position cushioning, Assembly position: An

6 in stock
536248 on Powermatic Associates

536248

Festo

compact cylinder ADN-20-40-I-P-A Per ISO 21287, with position sensing and internal piston rod thread Stroke: 40 mm, Piston diameter: 20 mm, Piston rod thread: M6, Cushioning: P: Flexible cushioning rings/plates at both ends, Assembly position: Any

1 in stock
164043 on Powermatic Associates

164043

Festo

flat cylinder DZF-32-80-P-A Non-rotating, for position sensing, with elastic cushioning rings in end positions. Various mounting options, with or without additional mounting components. Stroke: 80 mm, Piston diameter: (* 32 mm, * Equivalent diameter), Max

1 in stock

Manufacturer warranty

557202 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 557202 with other Pneumatic Actuators products

Material of dynamic seals

Based on norm

Operating pressure

Information on operating ...

Theoretical force at 6 ba...

Type of mounting

Flange screws material

Piston diameter

Mounting position

Mode of operation

Selected product

557202
Backordered
557202
Festo

compact cylinder ADNGF-1/2"-1"-P-A According to ISO 21287, with plain-bearing guide, piston rod secu...

Material of dynamic sealsTPE-U(PU)

Based on normISO 21287

Operating pressure0.1 MPa ... 1 MPa

Information on operating and pilot mediaOperation with oil lubricati...

Theoretical force at 6 bar, advancing68 N

Type of mountingOptionally: With accessories

Flange screws materialSteel

Piston diameter1/2"

Mounting positionAny

Mode of operationDouble-acting

554226
1 in stock
554226
Festo

compact cylinder ADNGF-20-40-P-A According to ISO 21287, with plain-bearing guide, piston rod secure...

Material of dynamic seals-

Based on normISO 21287

Operating pressure0.15 MPa ... 1 MPa

Information on operating and pilot media-

Theoretical force at 6 bar, advancing-

Type of mounting-

Flange screws material-

Piston diameter20 mm

Mounting positionAny

Mode of operationDouble-acting

164043
1 in stock
164043
Festo

flat cylinder DZF-32-80-P-A Non-rotating, for position sensing, with elastic cushioning rings in end...

Material of dynamic seals-

Based on norm-

Operating pressure0.1 MPa ... 1 MPa

Information on operating and pilot media-

Theoretical force at 6 bar, advancing-

Type of mounting-

Flange screws material-

Piston diameter32 mm Equivalent diameter

Mounting positionAny

Mode of operationDouble-acting

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

Recently viewed products

MFI1FRL17N4 on Powermatic Associates

MFI1FRL17N4

Novanta IMS

Novanta IMS MFI1FRL17N4 is a stepper motor controller within the Stepper motor controllers sub-range, designed under the MicroDrive series. It operates with a supply voltage range of 12Vdc to 48Vdc, nominally at 24Vdc, and supports a rated current of 3A. This controller is equipped for DC stepper motor drive functions and features an ambient air temperature for operation between 0 and +65 °C. For connectivity, it includes 30cm / 12" bare end flying leads, a 10-pin wire crimp connector, and a 4-pin wire crimp connector. Communication with the controller is facilitated through RS-422 and RS-485 protocols. It also offers 4 x digital outputs (sinking; NPN) and 4 x digital inputs (sourcing; NPN). The device is designed to be stored in conditions ranging from -25 to +70 °C ambient air temperature.

0 in stock
MDI4MRQ34C1-EQ on Powermatic Associates

MDI4MRQ34C1-EQ

Novanta IMS

Novanta IMS MDI4MRQ34C1-EQ is a stepper motor designed with an integrated driver and a 2-phase AC stepper motor configuration. It features an external single-end 512-line optical encoder and is built with a triple (3) motor stack, Plus 2 version for expanded features. This motor offers connectivity through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. It operates on a supply voltage of 120Vac and is mounted via an 85x85mm flange. The MDI4MRQ34C1-EQ is designed to function within an ambient air temperature range of 0 to +85°C and is protected to a degree of IP65. It has a moment of inertia of 3.4kg.cm^2 and provides a stall torque of 529N.cm, with a resolution characterized by a 1.8° step angle.

0 in stock
LMHCA571C on Powermatic Associates

LMHCA571C

Novanta IMS

Novanta IMS LMHCA571C is a stepper motor that falls under the high-torque stepper motors sub-range. It features an integrated driver and a high-torque DC stepper motor with an incremental magnetic encoder, utilizing a single motor stack and closed-loop hMTechnology for precise control. This motor offers a variety of connection types, including a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting CANopen communication protocol. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The LMHCA571C is designed for mounting with a 57x57mm flange and is rated with a degree of protection of IP65, making it suitable for environments where dust and water resistance is necessary. It has a moment of inertia of 0.14kg.cm^2 and can deliver a stall torque of 107N.cm. The resolution of this stepper motor is defined by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

compact cylinder ADNGF-1/2"-1"-P-A According to ISO 21287, with plain-bearing guide, piston rod secured against rotation by means of guide rods and yoke plate. Stroke: 1 ", Piston diameter: 1/2", Based on the standard: ISO 21287, Cushioning: P: Flexible c

Similar products from: Pneumatic Actuators

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock