Powermatic Associates Logo

569887 Festo Pneumatic Tubing

569887 on Powermatic Associates
Festo

Part#:569887

Alt. Part#:PEN-5/8-SW-150-CB

Manufacturer:Festo

Category:Pneumatic Tubing

Product Lifecycle:Active

Product description

plastic tubing PEN-5/8-SW-150-CB standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outer diameter, inches: 5/8, Bending radius relevant for flow rate: 0,41 Fuß, Min. bending radius: 0,196 Fuß, Tubing ch

Product Details

  • External-Ø inches
    5/8
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com
  • Note on materials
    Free of copper and PTFE RoHS-compliant
  • Temperature-dependent operating pressure
    -0.993 bar ... 9.997 bar
  • Color
    Black
  • Pneumatic tubing test conditions
    Suitability for energy chains: >5 million cycles as per FN 942021
  • Bending radius relevant for flow rate
    124.968 mm
  • Type code
    PEN
  • Product weight by length
    1.158 kg/m
  • Shore hardness
    D 52 +/-3
  • Tubing characteristics
    Suitable for energy chains in applications with high cycle rates
  • Min. bending radius
    59.741 mm
  • Ambient temperature
    -30 °C ... 60 °C
  • Pneumatic connection
    For plug connection outside diameter 5/8"
  • Material of pneumatic tubing
    PE

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

569887 Related Documents

569887 DataSheet.pdf

Similar products from: Festo Pneumatic Tubing

567951 on Powermatic Associates

567951

Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 1/2, Bending radius relevant for flow rate: 0,204 Fuß, Min. bending radius: 0,075 Fuß, Tubing characteristics: Suitable for energy chains

1560 in stock
159665 on Powermatic Associates

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

150 in stock
567965 on Powermatic Associates

567965

Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 5/16, Bending radius relevant for flow rate: 0,121 Fuß, Min. bending radius: 0,065 Fuß, Tubing characteristics: Suitable for energy chai

3540 in stock
159668 on Powermatic Associates

159668

Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 10 mm, Bending radius relevant for flow rate: 54 mm, Inside diameter: 7 mm, Min. bendi

1650 in stock
197383 on Powermatic Associates

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for energy

50 in stock
553938 on Powermatic Associates

553938

Festo

plastic tubing PUN-6X1-SW-500 Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. ben

500 in stock

Manufacturer warranty

569887 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 569887 with other Pneumatic Tubing products

External-Ø inches

Operating medium

Note on materials

Temperature-dependent ope...

Color

Pneumatic tubing test con...

Bending radius relevant f...

Type code

Product weight by length

Shore hardness

Selected product

569887
Backordered
569887
Festo

plastic tubing PEN-5/8-SW-150-CB standard O.D tubing, for QS plug connectors, polyethylene (not appr...

External-Ø inches5/8

Operating mediumCompressed air as per ISO 85...

Note on materialsFree of copper and PTFE RoHS...

Temperature-dependent operating pressure-0.993 bar ... 9.997 bar

ColorBlack

Pneumatic tubing test conditionsSuitability for energy chain...

Bending radius relevant for flow rate124.968 mm

Type codePEN

Product weight by length1.158 kg/m

Shore hardnessD 52 +/-3

567951
1560 in stock
567951
Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer ...

External-Ø inches1/2

Operating mediumCompressed air as per ISO 85...

Note on materials-

Temperature-dependent operating pressure-0.993 bar ... 9.997 bar

ColorBlue

Pneumatic tubing test conditionsSuitability for energy chain...

Bending radius relevant for flow rate62.179 mm

Type codePUN-H

Product weight by length0.88 kg/m

Shore hardness-

567965
3540 in stock
567965
Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer...

External-Ø inches5/16

Operating mediumCompressed air as per ISO 85...

Note on materials-

Temperature-dependent operating pressure-0.993 bar ... 9.997 bar

ColorNatural

Pneumatic tubing test conditionsSuitability for energy chain...

Bending radius relevant for flow rate36.881 mm

Type codePUN-H

Product weight by length0.31 kg/m

Shore hardness-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Pneumatic tubing, an essential component of pneumatic systems, carries compressed air or gas between parts. Constructed from durable and flexible materials such as polyurethane and polyamide, it comes in various types to meet different needs, including resistance to wear, corrosion, and other environmental elements. This tubing is indispensable in industries such as automation, manufacturing, and ...

Pneumatic Tubing

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

plastic tubing PEN-5/8-SW-150-CB standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outer diameter, inches: 5/8, Bending radius relevant for flow rate: 0,41 Fuß, Min. bending radius: 0,196 Fuß, Tubing ch

Similar products from: Pneumatic Tubing

What can I help you find today?

Recommended parts

AFP0RC32T on Powermatic Associates

AFP0RC32T

Panasonic

Panasonic AFP0RC32T is a CPU unit within the C32 sub-range, featuring an integrated Programmable Logic Controller (PLC) with transistor outputs. It offers memory backup and self-diagnostic functions. The unit connects via a MIL connector and mini USB, and is designed for DIN rail mounting. It supports the RS-232 communication protocol and can handle up to 128 x I/O points and 3 x expansion units. The memory capacity is 32K steps for programs and 32765 words / 32K words for data, supporting up to 4096 x I/O points. It includes 16 x digital inputs (24Vdc; Sink/Source; with 6 x high-speed 50kHz counters) and 16 x digital outputs (24Vdc; NPN; 200mA transistor; with 4 x 50kHz Pulse outputs/axes + 4 x 4.8kHz; 1000 resolution PWM channels). There are also 6 x analog inputs (RTD Pt100 / RTD Pt1000 / RTD Ni1000 / Resistance; with 0.1K/°F / 0.01K/°F resolution). Programming is supported in Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). It features an 8-character password setting for program upload protection. Processing times are 80ns/step for basic instructions up to 3000 steps, with a minimum of 2.2µs, and 320ns/step for high-level instructions up to 3000 steps, with a minimum of 580ns/step for basic instructions after 3000 steps. Operating modes include periodical interrupt (0.5ms-1.5s) execution, interrupt program execution, constant scan execution, and program edition during RUN download in RUN mode.

5 in stock