8030608 Festo Quarter Turn Actuators

Product Details

• Mode of operation
  Double-acting
• Safety integrity level (SIL)
  Up to SIL 2 high demand mode Up to SIL 2 low demand mode
• Type of ignition protection for gas
  Ex h IIC T6...T3 Gb X
• CE marking (see declaration of conformity)
  as per EU explosion protection directive (ATEX)
• Note about the torque
  The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
• Pneumatic connection
  G1/8
• Size of valve actuator
  0360
• Depth shaft connection
  24.3 mm
• Cushioning
  No cushioning
• Symbol
  00991265
• Valve connection conforms to standard
  VDI/VDE 3845 (NAMUR)
• ATEX category for dust
  II 2D
• Explosive ambient temperature
  -20°C <= Ta <= +150°C
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Product weight
  6500 g
• Housing material
  Wrought aluminum alloy
• Material number for shaft
  1.4305
• Swivel angle
  90 deg
• Type code
  DAPS
Position sensing
None
Nominal operating pressure
5.6 bar
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Corrosion resistance class (CRC)
3 - High corrosion stress
Torque at nominal operating pressure and 50° swivel angle
180 Nm
Shaft connection
T22
Material of screws
High-alloy steel
Flange hole pattern
F07 F10
Standard connection for valve
ISO 5211
Mounting position
Any
Closing direction
Clockwise closing
ATEX category gas
II 2G
Ambient temperature
-20 °C ... 150 °C
Torque at nominal operating pressure and 0° swivel angle
360 Nm
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
12.6 l
Seals material
FPM PTFE-reinforced
Cover material
Wrought aluminum alloy
End-position adjusting range at 0°
-1 deg ... 9 deg
Design
Scotch yoke system
Operating pressure
3 bar ... 8.4 bar
Explosion prevention and protection
Zone 1 (ATEX) Zone 22 (ATEX)
Torque at nominal operating pressure and 90° swivel angle
270 Nm
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Shaft material
High-alloy steel

8030608 Related Documents