8038491 Festo Compressed Air Preparation Units

Product Details

• For use in the food industry
  See supplementary material information
• Note on forced dynamization
  Switching frequency at least once a month
• Conforms to standard
  DIN EN ISO 13849-1 DIN EN ISO 13849-2
• Pressure gauge
  with pressure gauge
• Duty cycle
  100%
• Switching time off
  40 ms
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Temperature of medium
  -10 °C ... 50 °C
• Shock resistance
  Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
• Series
  MS
• Width dimension
  62 mm
• Safety integrity level (SIL)
  Exhaust/SIL 3 Avoidance of unexpected start-up (pressurization)/SIL 3
• Actuation type
  Electrical
• Pilot air supply port
  Internal
• Type of control
  Pilot-controlled
• Valve function
  3/2, closed, monostable Pressure build-up function
• Standard flow rate exhaust 6-> 0 bar
  9000 l/min
• Coil characteristics
  24 V DC: 1.8 W
• Operating medium
  Compressed air as per ISO 8573-1:2010 [7:4:4]
• Degree of protection
  IP65 With plug socket
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Pneumatic connection 1
G1/2
Housing material
Die-cast aluminum
KC characters
KC EMC
Type code
MS6-SV
Design
Piston seat
Position sensing principle
Piston magnet principle
Symbol
00995704
Max. switching frequency
1 Hz
Permissible voltage fluctuations
+10 %/-15 %
Noise level
75 dB(A)
Certification
RCM compliance mark
Product weight
2110 g
Electrical connection, proximity sensor
2x cables with plugs Rotatable thread
Size
6
Safety function
Exhausting Prevention of unexpected start-up (pressurization)
Underlap
no
Exhaust air function
Without flow control option
Reset method
Mechanical spring
C value
19.3 l/sbar
Standard nominal flow rate
4300 l/min
Signal status display
LED Switching outputs
Nominal operating voltage DC
24 V
Note on materials
RoHS-compliant
Ambient temperature
-10 °C ... 50 °C
CE marking (see declaration of conformity)
as per EU machinery directive
Mounting position
Any
Electrical connection
2-pin as per IEC 61076-2-101
Performance Level (PL)
Exhaust/category 3, performance level d Avoidance of unexpected start-up (pressurization)/category 3, performance level d
Sealing principle
Soft
Manual override
None
Operating pressure
3.5 bar ... 10 bar
b-value
0.21
On switching time
130 ms
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Storage temperature
-10 °C ... 50 °C
Pneumatic connection 2
G1/2
Piston rod material
High-alloy stainless steel
Type of mounting
Optionally: With accessories
Pneumatic connection 3
G1
Seals material
NBR

8038491 Related Documents