8118298 Festo Electric Actuators

Product Details

• IO-Link®, communication mode
  COM3 (230.4 kBd)
• Piston rod end
  External thread
• Rotor position sensor
  Absolute encoder, single-turn
• Max. speed
  0.22 m/s
• Storage temperature
  -20 °C ... 60 °C
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Guide value for payload, horizontal
  56 kg
• KC characters
  KC EMC
• Additional functions
  User interface Integrated end-position sensing
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Logic interface, connection pattern
  00992264
• Power supply, type of connection
  Plug
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Max. cable length
  15 m outputs 20 m for IO-Link® operation
• Power supply, connection pattern
  00995989
• Max. current of digital logic outputs
  100 mA
• Logic interface, connection type
  Plug
DC nominal voltage
24 V
Logic interface, number of poles/wires
8
Power supply, number of pins/wires
4
Characteristics of logic input
Configurable Not galvanically isolated
Product weight
3329 g
Nominal current
5.3 A
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, port class
A
IO-Link®, process data width IN
2 Byte
IO-Link®, protocol version
Device V 1.1
Display
LED
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Ready status indication
LED
Parameterization interface
IO-Link® User interface
Logic input specification
Based on IEC 61131-2, type 1
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Work range of logic input
24 V
Rotor position sensor resolution
16 bit
IO-Link®, minimum cycle time
1 ms
Stroke reserve
0 mm
Reversing backlash
100 µm
Mounting position
Any
Design
Electric actuator With integrated drive
Protection against torsion/guide
With plain-bearing guide
Max. acceleration
5 m/s²
Insulation protection class
B
Ambient temperature
0 °C ... 50 °C
Max. feed force Fx
375 N
Basic weight with 0 mm stroke
2294 g
Housing material
Wrought aluminum alloy, smooth-anodized
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic inputs
2
Max. current consumption
5300 mA
IO-Link®, SIO mode support
Yes
IO-Link®, process data width OUT
2 Byte
Size
60
Screw diameter
12 mm
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mx
0 Nm
Max. torque Mz
6.4 Nm
Guide value for payload, vertical
18 kg
Piston rod material
High-alloy stainless steel
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, number of ports
1
IO-Link®, data memory required
500 byte
Piston rod thread
M12x1.25
Spindle pitch
12 mm/U
Spindle type
Ball screw drive
Homing
Fixed stop block positive Reference switch
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Max. torque My
6.4 Nm
Max. radial force on actuator shaft
230 N
Moving mass at 0 mm stroke
305 g
Additional moving mass per 10 mm stroke
6.5 g
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke
150 mm
Max. angle of rotation of the piston rod +/-
1 deg
Type code
EPCS
Symbol
00997294
Repetition accuracy
±0.02 mm
Permissible voltage fluctuations
+/- 15 %
Degree of protection
IP40
Certification
RCM compliance mark
Additional weight per 10 mm stroke
69 g
Type of mounting
With internal thread With accessories
Spindle material
Roller bearing steel
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Spindle nut material
Steel

8118298 Related Documents