Powermatic Associates Logo

HL-T1010F Panasonic Industrial Automation Components

HL-T1010F on Powermatic Associates
Panasonic

Part#:HL-T1010F

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Panasonic HL-T1010F is a photo-electric sensor designed as an ultra-compact laser collimated beam sensor head emitter and receiver pair, featuring a 10mm sensing width and compliance with FDA standards. It emits a green light and is equipped with a pre-wired 0.5m (50cm) 3-core 0.09mm2 shielded cable with a connector for easy installation. The sensor operates within an ambient air temperature range of 0 to +50°C and offers a sensing distance from 0m to 0.5m (0cm to 50cm, 0mm to 500mm, or 0 to 19.685 inches). A green LED serves as a visual position indicator, lighting up during laser emission to signal operation.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Panasonic Industrial Automation Components

AFP7CPS21 on Powermatic Associates

AFP7CPS21

Panasonic

Panasonic AFP7CPS21 is a Programmable Logic Controller (PLC) CPU unit designed for DIN rail mounting. It features a main function as a CPU unit with additional capabilities including a real-time clock, password protection, and PLC link. This model offers a memory capacity of 64K steps for programs and 131072 words / 131Kwords for data, alongside support for 32768 x I/O points. It supports multiple programming languages, including Ladder diagram (LD), Structured text (ST), Function block diagram (FBD), Sequential function chart (SFC), and Instruction list (IL). With a processing time of 14ns/step or 0.000014 ms, it operates under a constant scan execution mode.

10 in stock
FX-501P on Powermatic Associates

FX-501P

Panasonic

Panasonic FX-501P is an amplifier designed for sensor applications, featuring a digital fiber sensor amplifier with a red LED. It includes functions such as interference prevention, OFF-delay/ON-delay timer ranging from 0.05ms to 32s, a one-shot timer, three light emission levels plus an auto-setting (H-SP mode), and settings for hysteresis, shift amount, emission power, display turning, ECO mode, data bank loading and saving, copying, code, reset, logical calculation, and threshold tracking. The case cover is made of polycarbonate, and the switch is made of TPEE, ensuring durability. It comes pre-equipped with a connector for easy installation and features outputs short-circuit protection. Designed for DIN rail mounting, it operates at a wavelength of 643 nm and can function in ambient air temperatures ranging from -10 to +55°C. The FX-501P offers an IP40 degree of protection and supports both Light-ON and Dark-ON operating modes. Its current consumption is 40mA (0.04 A) under normal conditions and 28mA (0.028 A) in Eco mode, both at 24Vdc. The device has one digital output (PNP open-collector / 24Vdc / 100mA) and offers response times varying from 25µs to 24ms depending on the mode. It features a 4-digit red LED display and a 3-digit green LED display for clear indication, with a power consumption of 0.96 W in normal mode and 0.68 W in Eco mode.

232 in stock
AIG02GQ02D on Powermatic Associates

AIG02GQ02D

Panasonic

Panasonic AIG02GQ02D is a Programmable Terminal (PT) / Touchscreen HMI within the GT02G sub-range, featuring a black frame. This part operates with a supply voltage of 5Vdc and connects via an 8 pin terminal connector USB. It is designed with an IP67 degree of protection, ensuring its resistance to dust and water ingress. Communication is facilitated through the RS-232C protocol. The AIG02GQ02D comes with a memory capacity of 2MB (RAM) and a display resolution of 240x96 pixels. Its LCD screen measures 3.8 inches, utilizing an STN monochrome display with a green/orange/red backlight for clear visibility.

20 in stock
EX-L291-P-J on Powermatic Associates

EX-L291-P-J

Panasonic

Panasonic EX-L291-P-J is a photo-electric sensor made from PBT for the case and glass for the lens, designed to operate within an ambient air temperature range of -10 to +55 °C. It has a current consumption of 15mA (0.015 A) and offers a degree of protection rated at IP67. The sensor features a detection spot size of 6mm x 4mm, with a red light color and can detect objects as small as 25mm. It includes an orange LED for operation indication and a green LED for stability, with a response time of 500µs (0.0005 s). This model provides 1 x digital output (PNP open-collector / 24Vdc / 50mA), supports both Light-ON and Dark-ON operating modes, and has a sensing distance of up to 4m. It is equipped with protection functions against outputs short-circuit and inverse polarity. The sensor is characterized by its long sensing range, ultra-compact laser (Class 1) with a built-in amplifier and reflector, and continuously variable sensitivity adjustment. It comes pre-wired with an M8 connector pigtail, featuring 4 cores for the cable and 2 cores for the emitter in terms of circuits, and operates at a wavelength of 655 nm.

4 in stock
AIGT8162 on Powermatic Associates

AIGT8162

Panasonic

Panasonic AIGT8162 is a connector designed for P.L.C. connection, featuring a 5-pin mini DIN connector and 3 single wires plus a shielding wire. It operates on a 24Vdc supply voltage and utilizes the RS-232C communication protocol. The cable has a length of 2 meters or approximately 6.56 feet.

5 in stock
FT-Z30E on Powermatic Associates

FT-Z30E

Panasonic

Panasonic FT-Z30E is a fiber sensor designed for side sensing applications, featuring a flat fiber sensor emitter and receiver pair. It has a beam axis dimension of 2mm x 3mm and comes in a rectangular shape. The total length of the sensor is 2 meters. It is built to operate within an ambient air temperature range of -40 to +60°C. The FT-Z30E offers a degree of protection rated at IP40 and requires a minimum bending radius of R2 for installation and operation.

32 in stock

Manufacturer warranty

HL-T1010F Panasonic

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Panasonic

Powermatic Associates is an authorized Panasonic distributor, proudly offering a diverse range of innovative industrial products tailored to meet your evolving needs. Panasonic, renowned for its engineering excellence and cutting-edge technology, delivers a comprehensive portfolio encompassing automation, energy solutions, and electronic components designed to enhance operational efficiency, relia...

Recently viewed products

Relevant products

FAQ

Out if stock but available for backorder.

Panasonic HL-T1010F is a photo-electric sensor designed as an ultra-compact laser collimated beam sensor head emitter and receiver pair, featuring a 10mm sensing width and compliance with FDA standards. It emits a green light and is equipped with a pre-wired 0.5m (50cm) 3-core 0.09mm2 shielded cable with a connector for easy installation. The sensor operates within an ambient air temperature range of 0 to +50°C and offers a sensing distance from 0m to 0.5m (0cm to 50cm, 0mm to 500mm, or 0 to 19.685 inches). A green LED serves as a visual position indicator, lighting up during laser emission to signal operation.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock