Powermatic Associates Logo

LX-101-P Panasonic Industrial Automation Components

LX-101-P on Powermatic Associates
Panasonic

Part#:LX-101-P

Manufacturer:Panasonic

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Panasonic LX-101-P is a digital RGB color mark sensor featuring a 1x5mm spot size and utilizes RGB (Red/Green/Blue) light with a wavelength of 640 nm, 525 nm, and 470 nm. The housing is made of PBT material, and it comes pre-wired with a 2m 5-core 0.34mm2 cabtyre cable terminated with bare flying leads for connection. This sensor operates within an ambient air temperature range of -10 to +55°C and offers a degree of protection rated at IP67. It supports multiple operating modes including Light-ON, Dark-ON, Consistent-ON, and Inconsistent-ON. The current consumption is 30mA (0.03 A) in Normal mode and 25mA (0.025 A) in Eco mode. It features 1 x digital input (PNP non-contact) and 2 x digital outputs (PNP open-collector / 24Vdc / 50mA), with a sensing distance of 7mm-13mm. The response time is 45µs (0.000045 s), and it includes a 4-digit red LED display. Power consumption is 0.75 W in Normal mode and 0.6 W in Eco mode.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Panasonic Industrial Automation Components

EX-13EB-C5 on Powermatic Associates

EX-13EB-C5

Panasonic

Panasonic EX-13EB-C5 is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The visual position indicator features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. With a response time of 0.5ms / 0.0005 s and a single digital output (NPN open-collector / 24Vdc / 50mA), it operates in Dark-ON mode. The sensing distance is set at 0.5m / 50cm / 500mm / 19.685in. It includes protection functions such as outputs short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with side sensing and built-in amplification. The connection is facilitated by a pre-wired 5m 3-core (2-core on emitter side) 0.1mm2 cabtyre cable terminated with bare end flying leads.

10 in stock
AFPX-EFP0 on Powermatic Associates

AFPX-EFP0

Panasonic

Panasonic AFPX-EFP0 is a connector specifically designed for expansion FP0 adapter applications within the expansion units sub-range. It facilitates the connection of up to 3 slave devices. This part is engineered for DIN rail mounting, offering a streamlined installation process for various automation environments.

2 in stock
MS-EQ5-01 on Powermatic Associates

MS-EQ5-01

Panasonic

Panasonic MS-EQ5-01 is a mounting accessory designed as a foot / back angled mounting bracket.

26 in stock
AFPX-BATT on Powermatic Associates

AFPX-BATT

Panasonic

Panasonic AFPX-BATT is a battery designed for use as a backup or spare battery, specifically intended to maintain the real-time clock in automation systems.

1 in stock
AFPG804 on Powermatic Associates

AFPG804

Panasonic

Panasonic AFPG804 is a battery designed for backup or use as a spare battery.

13 in stock
HD-T1C on Powermatic Associates

HD-T1C

Panasonic

Panasonic HD-T1C is a control unit designed specifically for wafer alignment control. It features a housing made from heat-resistant ABS material and measures 0.3m or 30cm in length. This unit is pre-wired with a 0.3m or 30cm 3-core heat-resistant PVC cable that terminates with a connector for easy integration. It offers 1 x analog output (1-5Vdc) for transmitting alignment data. The HD-T1C operates with a current consumption of 70mA or 0.07 A and boasts a rapid response time of 500µs or 0.0005 s. Its measurement accuracy is precise at 30µm, ensuring accurate wafer alignment in automation processes.

2 in stock

Manufacturer warranty

LX-101-P Panasonic

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Panasonic

Powermatic Associates is an authorized Panasonic distributor, proudly offering a diverse range of innovative industrial products tailored to meet your evolving needs. Panasonic, renowned for its engineering excellence and cutting-edge technology, delivers a comprehensive portfolio encompassing automation, energy solutions, and electronic components designed to enhance operational efficiency, relia...

Recently viewed products

Relevant products

LX-101-Z on Powermatic Associates

LX-101-Z

Verified stock: 0

Panasonic LX-101-Z is a photo-electric sensor designed for digital RGB color mark sensing. It features a small sensing spot of 1x5mm and utilizes RGB (Red/Green/Blue) light with wavelengths of 640 nm, 525 nm, and 470 nm. The housing is made from PBT material, and it comes pre-equipped with a connector for easy installation. This sensor operates within an ambient air temperature range of -10 to +55°C and offers a degree of protection rated at IP67. It supports multiple operating modes including Light-ON, Dark-ON, Consistent-ON, and Inconsistent-ON. The LX-101-Z has a current consumption of 30mA (0.03 A) in normal mode and 25mA (0.025 A) in eco mode, with a sensing distance between 7mm and 13mm. It includes 1 x digital input (NPN non-contact) and 1 x digital output (NPN open-collector / 24Vdc / 50mA) (output 1), featuring a rapid response time of 45µs (0.000045 s). The sensor is equipped with a 4-digit red LED display and has a power consumption of 0.75 W in normal mode and 0.6 W in eco mode.

Panasonic

LX-101-P-Z on Powermatic Associates

LX-101-P-Z

Verified stock: 0

Panasonic LX-101-P-Z is a photo-electric sensor designed for digital RGB color mark sensing. It features a small detection spot of 1x5mm and utilizes RGB (Red/Green/Blue) light with wavelengths of 640 nm, 525 nm, and 470 nm. The housing is made from PBT material, ensuring durability, and it comes pre-equipped with a connector for easy installation. This sensor operates within an ambient air temperature range of -10 to +55 °C and offers a degree of protection rated at IP67. It supports multiple operating modes including Light-ON, Dark-ON, Consistent-ON, and Inconsistent-ON. The LX-101-P-Z has a low current consumption, with 30mA in normal mode and 25mA in eco mode. It includes 1 x digital input (PNP non-contact) and 1 x digital output (PNP open-collector / 24Vdc / 50mA) for versatile connectivity. The sensing distance ranges from 7mm to 13mm, and it boasts a quick response time of 45µs. For ease of use, it features a 4-digit red LED display and has a power consumption of 0.75 W in normal mode and 0.6 W in eco mode.

Panasonic

LX-101 on Powermatic Associates

LX-101

Verified stock: 0

Panasonic LX-101 is a digital RGB color mark sensor featuring a 1x5mm spot size and utilizes RGB (Red/Green/Blue) light with a wavelength of 640 nm, 525 nm, and 470 nm. The housing is made of PBT material, and it comes pre-wired with a 2m 5-core 0.34mm2 cabtyre cable terminated with bare flying leads for connectivity. This sensor operates within an ambient air temperature range of -10 to +55 °C and offers a degree of protection rated at IP67. It supports multiple operating modes including Light-ON, Dark-ON, Consistent-ON, and Inconsistent-ON. The LX-101 has a current consumption of 30mA (0.03 A) in normal mode and 25mA (0.025 A) in eco mode, with a sensing distance between 7mm and 13mm. It features 1 x digital input (NPN non-contact) and 2 x digital outputs (NPN open-collector / 24Vdc / 50mA each). The response time is 45µs (0.000045 s), and it includes a 4-digit red LED display. Power consumption is 0.75 W in normal mode and 0.6 W in eco mode.

Panasonic

FAQ

Out if stock but available for backorder.

Panasonic LX-101-P is a digital RGB color mark sensor featuring a 1x5mm spot size and utilizes RGB (Red/Green/Blue) light with a wavelength of 640 nm, 525 nm, and 470 nm. The housing is made of PBT material, and it comes pre-wired with a 2m 5-core 0.34mm2 cabtyre cable terminated with bare flying leads for connection. This sensor operates within an ambient air temperature range of -10 to +55°C and offers a degree of protection rated at IP67. It supports multiple operating modes including Light-ON, Dark-ON, Consistent-ON, and Inconsistent-ON. The current consumption is 30mA (0.03 A) in Normal mode and 25mA (0.025 A) in Eco mode. It features 1 x digital input (PNP non-contact) and 2 x digital outputs (PNP open-collector / 24Vdc / 50mA), with a sensing distance of 7mm-13mm. The response time is 45µs (0.000045 s), and it includes a 4-digit red LED display. Power consumption is 0.75 W in Normal mode and 0.6 W in Eco mode.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts