PILZ-773110 Pilz Electrical Safety Devices

Out if stock but available for backorder.

Pilz PILZ-773110 is a configurable safety base unit designed for DIN rail mounting, featuring a 35mmx7.5mm horizontal rail. It operates within an ambient air temperature range of 0 to +60°C without forced convection and up to +55°C with forced convection. The unit has a net height of 94mm and is expandable for mechanical press functions. It supports a rated current of 6A at 24Vdc (DC-1) and 240Vac (AC-1), 3A at 24Vdc (DC-13) and 230Vac (AC-15), and a signal level of 2A at "1" with a residual current of 0.5mA at "0" signal. Connection types include plug-in/detachable screw or spring-loaded terminals, accommodating various wire sizes and stripping lengths. The base unit has dimensions of W27mm x L1000mm (max cable length per input) x H135mm x D121mm, with an IP20 degree of protection and a supply voltage range of 20.4-28.8Vdc. It is constructed from PPO bottom housing and ABS front housing, supports Ethernet communication protocol, and allows for a maximum overall cable length of 40km for test pulse output. The power consumption is 192W with an external power supply under load, 9W with no load, and 2.5W per expansion module. It features 20 safety inputs and 9 digital outputs, including 4 safety semiconductor outputs, 1 standard auxiliary semiconductor output, 2 safety relay outputs, 4 test pulse outputs, and 1 standard cascading output, all designed with short-circuit proof, potential isolation, and galvanic isolation protection functions. The response time varies from 0.5s to 3s depending on the function, with a rated impulse voltage of 6kV and a rated insulation voltage of 250V. Current consumption is rated at 6A with specific time delays for switch-off, switch-on, supply interruption, input delay, and input pulse duration, alongside a maximum cycle time of 15ms for device processing.