Powermatic Associates Logo

170ADM35010 Schneider Electric Industrial Automation Components

170ADM35010 on Powermatic Associates
Schneider Electric

Part#:170ADM35010

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Only 2 left in stock. Order Now!

May 1, 2025

Product description

Schneider Electric 170ADM35010 is an I/O unit designed as a DC digital input/output (I/O) module. It operates with a supply voltage range of 19-30Vdc, with a nominal voltage of 24Vdc, and can withstand an ambient air temperature for operation ranging from 0 to +60°C. For storage, the acceptable ambient air temperature range is -40 to +85°C. This module is part of the Modicon Momentum I/O modules series and features 16 digital inputs (24Vdc) and 16 digital outputs (24Vdc, 4A) with solid-state relay outputs. Each output has a resistance of 250mA at 24Vdc. The unit is designed for wall mounting and offers a degree of protection suitable for its specified operating and storage temperature ranges.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
VW3A9921 on Powermatic Associates

VW3A9921

Schneider Electric

Schneider Electric VW3A9921 is an adapter designed for direct circuit breaker mounting. This mechanical adapter kit facilitates the integration of components by providing a compatible interface for secure and straightforward installation.

12 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock

Manufacturer warranty

170ADM35010 Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price within minutes.

Stock:

2

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

GV2ME16 on Powermatic Associates

GV2ME16

Verified stock: 0

Schneider Electric GV2ME16 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and offers protection functions against short-circuit and thermal overload. The rated current range is 9 - 14 A, with a rated insulation voltage (Ui) of 690 V. This device is suitable for DIN rail or mounting plate installation, with a net width of 45 mm. Operation is facilitated through a push-button mechanism. Protection settings include a fixed short-circuit pickup current of 170A. The rated impulse voltage (Uimp) stands at 6 kV, and it supports rated active powers of 5.5 kW at 400/415Vac, 7.5 kW at 500Vac, and 11 kW at 690Vac. The trip current rating is 14 AT, with a frame current rating of 32 AF. It boasts a mechanical durability of 100,000 operations at no load and an electrical durability of 100,000 operations at 440Vac, AC-3, In/2 with load. Connection is made via screw-clamp terminals. The rated voltage for phase-to-phase is 690 V, covering all 3 protected poles. The trip unit type is thermal-magnetic, supporting a minimum current of 9 A and a maximum current of 14 A, classified under utilisation category A AC-3.

Schneider Electric

GV2ME163 on Powermatic Associates

GV2ME163

Verified stock: 0

Schneider Electric GV2ME163 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and offers protection functions against short-circuit and thermal overload. The rated current range for this device is 9 - 14 A, with a rated insulation voltage (Ui) of 690 V. It is designed for DIN rail mounting and has a net width of 45 mm. Operation is facilitated through a push-button mechanism. The protection settings for short-circuit pickup current are fixed at 170A. The GV2ME163 has a rated impulse voltage (Uimp) of 6 kV and supports rated active power outputs of 5.5 kW at 400/415Vac, 7.5 kW at 500Vac, and both 11 kW and 9 kW at 690Vac. Its trip current rating is 14 AT, with a frame current rating of 32 AF. The mechanical durability of the device is rated at 100,000 operations without load, and its electrical durability, under load conditions (440Vac; AC-3; In/2), is also 100,000 operations. It features spring type terminals, a rated voltage (AC) phase-to-phase of 690 V, and all three poles are protected. The minimum and maximum current ratings are 9 A and 14 A, respectively, with a thermal-magnetic trip unit type. It is categorized under utilisation category A AC-3.

Schneider Electric

FAQ

2 in stock

Schneider Electric 170ADM35010 is an I/O unit designed as a DC digital input/output (I/O) module. It operates with a supply voltage range of 19-30Vdc, with a nominal voltage of 24Vdc, and can withstand an ambient air temperature for operation ranging from 0 to +60°C. For storage, the acceptable ambient air temperature range is -40 to +85°C. This module is part of the Modicon Momentum I/O modules series and features 16 digital inputs (24Vdc) and 16 digital outputs (24Vdc, 4A) with solid-state relay outputs. Each output has a resistance of 250mA at 24Vdc. The unit is designed for wall mounting and offers a degree of protection suitable for its specified operating and storage temperature ranges.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock