ATV930U40M3 Schneider Electric Industrial Automation Components

Product Details

• Protection Type
  Thermal protection motor Safe torque off motor Motor phase break motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent between output phases and earth drive Overload of output voltage drive
• Variable Speed Drive Application Selection
  Food and beverage processing Mixer Food and beverage processing Conveyor Food and beverage processing Shredder Hoisting Process crane Marine Thruster Marine Winch Material working (wood, ceramic, stone, pvc, metal) Press
  
• Maximum Switching Current
  Relay output R1 resistive, cos phi = 1 3 A 250 V AC Relay output R1 resistive, cos phi = 1 3 A 30 V DC Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1 inductive, cos phi = 0.4 7 ms 2 A 30 V DC Relay output R2
• Option Module
  Slot A communication module Profibus DP V1 Slot A communication module Profinet Slot A communication module DeviceNet Slot A communication module EtherCAT Slot A communication module CANopen daisy chain RJ45 Slot A communication m
• Sampling Duration
  2 ms +/- 0.5 ms DI1...DI8) - discrete input 5 ms +/- 1 ms DI7, DI8) - pulse input 1 ms +/- 1 ms AI1, AI2, AI3) - analog input 5 ms +/- 1 ms AQ1, AQ2) - analog output
• Asynchronous Motor Control Profile
  Optimized torque mode Constant torque standard Variable torque standard
• Relay Output Type
  Configurable relay logic R1 fault relay NO/NC 100000 cycles Configurable relay logic R2 sequence relay NO 1000000 cycles Configurable relay logic R3 sequence relay NO 1000000 cycles
• Local Signalling
  Local diagnostic 3 LED mono/dual colour) Embedded communication status 5 LED dual colour) Communication module status 2 LED dual colour) Presence of voltage 1 LED red)
• Line Current
  15.1 A 200 V normal duty) 12.9 A 240 V normal duty) 11.7 A 200 V heavy duty) 10.2 A 240 V heavy duty)
• Discrete Input Logic
  Positive logic (source) DI1...DI8), < 5 V, > 11 V Negative logic (sink) DI1...DI8), > 16 V, < 10 V Positive logic (source) DI7, DI8), < 0.6 V, > 2.5 V Positive logic (source) STOA, STOB), < 5 V, > 11 V
• Motor Slip Compensation
  Automatic whatever the load Not available in permanent magnet motor law Adjustable Can be suppressed
• Electrical Connection
  Control screw terminal 0.5...1.5 mm² AWG 20...AWG 16 Line side screw terminal 4...6 mm² AWG 12...AWG 10 DC bus screw terminal 4...6 mm² AWG 12...AWG 10 Motor screw terminal 6 mm² AWG 10
• Accuracy
  +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
• Analogue Input Type
  AI1, AI2, AI3 software-configurable voltage 0...10 V DC 30 kOhm 12 bits AI1, AI2, AI3 software-configurable current 0...20 mA/4...20 mA 250 Ohm 12 bits
• Linearity Error
  AI1, AI2, AI3 +/- 0.15 % of maximum value analog input AQ1, AQ2 +/- 0.2 % analog output
• Discrete Output Type
  Logic output DQ+ 0…1 kHz <= 30 V DC 100 mA Programmable as pulse output DQ+ 0…30 kHz <= 30 V DC 20 mA Logic output DQ- 0…1 kHz <= 30 V DC 100 mA
• Input Compatibility
  DI1...DI8 discrete input level 1 PLC EN/IEC 61131-2 DI7, DI8 pulse input level 1 PLC IEC 65A-68 STOA, STOB discrete input level 1 PLC EN/IEC 61131-2
• Supply
  External supply for digital inputs 24 V DC 19…30 V), <1.25 mA overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 %, <10 mA overload and short-circuit protection Internal supply for di
• Communication Port Protocol
  Modbus serial Modbus TCP EtherNet/IP
• Discrete Input Type
  DI1...DI8 programmable, 24 V DC <= 30 V)3.5 kOhm DI7, DI8 programmable as pulse input 0…30 kHz, 24 V DC <= 30 V) STOA, STOB safe torque off, 24 V DC <= 30 V)> 2.2 kOhm
IP Degree Of Protection
IP21 IEC 61800-5-1 IP21 IEC 60529
Analogue Output Type
Software-configurable voltage AQ1, AQ2 0...10 V DC 470 Ohm 10 bits Software-configurable current AQ1, AQ2 0...20 mA 500 Ohm 10 bits
Frequency Resolution
Display unit 0.1 Hz Analog input 0.012/50 Hz
Apparent Power
5.4 kVA 240 V normal duty) 4.2 kVA 240 V heavy duty)
Maximum Horse Power Rating
5 hp normal duty 4 hp heavy duty
Switching Frequency
2...16 kHz adjustable 4...16 kHz with derating factor
Synchronous Motor Control Profile
Permanent magnet motor Synchronous reluctance motor
Motor Power Kw
4 kW normal duty) 3 kW heavy duty)
Transmission Rate
10/100 Mbit/s Ethernet IP/Modbus TCP 4.8, 9.6, 19.2, 38.4 kbit/s Modbus serial
Product Destination
Asynchronous motors Synchronous motors
Connector Type
2 RJ45 Ethernet IP/Modbus TCP on the control block 1 RJ45 Modbus serial on the control block
Continuous Output Current
18.7 A 4 kHz normal duty 13.7 A 4 kHz heavy duty
Variant
Standard version With braking chopper
Maximum Transient Current
22.4 A 60 s normal duty) 20.6 A 60 s heavy duty)
Mounting Mode
Wall mount
Power Range
4…6 kW 200…240 V 3 phase
Data Format
8 bits, configurable odd, even or no parity Modbus serial
Braking To Standstill
By DC injection
Isolation
Between power and control terminals
Minimum Switching Current
Relay output R1, R2, R3 5 mA 24 V DC
Refresh Time
Relay output R1, R2, R3)5 ms +/- 0.5 ms)
Relay Output Number
3
Discrete Output Number
2
Analogue Output Number
2
Discrete Input Number
10
Depth
8.11 in (206 mm)
Net Weight
10.14 lb(US) (4.6 kg)
Analogue Input Number
3
Height
13.78 in (350 mm)
Width
5.67 in (144 mm)
Method Of Access
Slave Modbus TCP
Exchange Mode
Half duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP
Type Of Polarization
No impedance Modbus serial
Number Of Addresses
1…247 Modbus serial
Physical Interface
2-wire RS 485 Modbus serial
Transmission Frame
RTU Modbus serial
Acceleration And Deceleration Ramps
Linear adjustable separately from 0.01...9999 s
Output Voltage
<= power supply voltage
Number Of Preset Speeds
16 preset speeds
Safety Function
STO (safe torque off) SIL 3
Nominal Switching Frequency
4 kHz
Speed Drive Output Frequency
0.1…599 Hz
Prospective Line Isc
50 kA
[Us] Rated Supply Voltage
200...240 V - 15...10 %
Phase
3 phase
Type Of Cooling
Forced convection
Supply Frequency
50...60 Hz +/- 5 %
Range Of Product
Altivar Process ATV900
Device Application
Industrial Application
Degree Of Protection
UL type 1 UL 508C
Device Short Name
ATV930
EMC Filter
Without EMC filter
Product Or Component Type
Variable speed drive

ATV930U40M3 Related Documents