ATV340D22N4E Schneider Electric Industrial Automation Components

Product Details

• Supply Frequency
  50...60 Hz +/- 5 %
• IP Degree Of Protection
  IP20
• Variant
  Standard version
• Discrete Output Type
  Programmable output DQ1, DQ2 30 V DC 100 mA
• Analogue Input Number
  2
• [Us] Rated Supply Voltage
  380...480 V - 15...10 %
• Type Of Polarization
  No impedance
• With Safety Function Safe Programmable Logic
  False
• Mounting Mode
  Cabinet mount
• Discrete Output Number
  2.0
• Physical Interface
  2-wire RS 485
• 4 Quadrant Operation Possible
  True
• Brake Chopper Integrated
  True
• With Safety Function Safe Position (SP)
  False
• Nominal Output Current
  46.0 A
• Discrete Input Number
  5
• Connector Type
  3 RJ45
• Transmission Frame
  RTU
• Braking To Standstill
  By DC injection
• Analogue Output Number
  2
Number Of Addresses
1…247
Maximum Input Current Per Phase
63.5 A
Range Of Product
Altivar Machine ATV340
Number Of Preset Speeds
16 preset speeds
Maximum Output Frequency
0.599 kHz
Maximum Output Voltage
480 V
With Sft Fct Safe Stop 2 (SS2)
False
Phase
3 phase
Product Specific Application
Machine
Output Voltage
<= power supply voltage
Relay Output Number
2
Data Format
8 bits, configurable odd, even or no parity
With Safety Function Safe Speed Monitor (SSM)
False
EMC Filter
Class C3 EMC filter integrated
With Safety Function Safe Operating Stop (SOS)
False
Product Or Component Type
Variable speed drive
With Safety Function Safely Limited Position (SLP)
False
Nominal Switching Frequency
4 kHz
Prospective Line Isc
22 kA
Pollution Degree
2 EN/IEC 61800-5-1
Net Weight
22.49 lb(US) (10.2 kg)
With Safety Function Safe Brake Management (SBC/SBT)
True
Width
7.09 in (180.0 mm)
Height
15.16 in (385.0 mm)
Depth
9.80 in (249.0 mm)
Base Load Current At High Overload
46.0 A
With Safety Function Safe Stop 1 (SS1)
True
With Safety Function Safely Limited Speed (SLS)
True
Base Load Current At Low Overload
62.0 A
With Safety Function Safe Direction (SDI)
False
With Safety Function Safe Torque Off (STO)
True
Maximum Horse Power Rating
40 hp normal duty 30 hp heavy duty
Motor Power Kw
30 kW normal duty 22 kW heavy duty
Switching Frequency
2...16 kHz adjustable 6...16 kHz with derating factor
Synchronous Motor Control Profile
Permanent magnet motor Reluctance motor
Method Of Access
Slave Modbus RTU Slave Modbus TCP
Analogue Output Type
Software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits Software-configurable current AQ1 0...20 mA 500 Ohm 10 bits
Minimum Switching Current
Relay output R1B 5 mA 24 V DC Relay output R2C 5 mA 24 V DC
Apparent Power
45.1 kVA 480 V normal duty) 42.1 kVA 480 V heavy duty)
Continuous Output Current
62 A 4 kHz normal duty 46 A 4 kHz heavy duty
Acceleration And Deceleration Ramps
S, U or customized Linear adjustable separately from 0.01...9999 s
Communication Port Protocol
Modbus TCP EtherNet/IP Modbus serial
Discrete Input Type
PTI programmable as pulse input 0…30 kHz, 24 V DC 30 V) DI1...DI5 safe torque off, 24 V DC 30 V)3.5 kOhm programmable
Asynchronous Motor Control Profile
Optimized torque mode Constant torque standard Variable torque standard
Relay Output Type
Relay outputs R1A Relay outputs R1C 100000 cycles Relay outputs R2A Relay outputs R2C 100000 cycles
Option Card
communication module, Profinet communication module, DeviceNet communication module, CANopen communication module, EtherCAT
Transmission Rate
4.8 kbit/s 9.6 kbit/s 19.2 kbit/s 38.4 kbit/s
Analogue Input Type
AI1 software-configurable current 0...20 mA 250 Ohm 12 bits AI1 software-configurable temperature probe or water level sensor AI1 software-configurable voltage 0...10 V DC 31.5 kOhm 12 bits AI2 software-configurable voltage - 10...10 V DC 3
Power Dissipation In W
Natural convection 28 W 380 V 4 kHz heavy duty) Forced convection 486 W 380 V 4 kHz heavy duty) Natural convection 39 W 380 V 4 kHz normal duty) Forced convection 631 W 380 V 4 kHz normal duty)
Motor Slip Compensation
Automatic whatever the load Can be suppressed Adjustable Not available in permanent magnet motor law
Maximum Transient Current
68.2 A 60 s normal duty) 69 A 60 s heavy duty) 83.7 A 2 s normal duty) 83 A 2 s heavy duty)
Electrical Connection
Control screw terminal 0.2...2.5 mm² AWG 24...AWG 12 Motor screw terminal 6...25 mm² AWG 8...AWG 3 Line side screw terminal 10...25 mm² AWG 6...AWG 3 DC bus screw terminal 10...25 mm² AWG 6...AWG 3
Maximum Switching Current
Relay output R1C resistive, cos phi = 1 3 A 250 V AC Relay output R1C resistive, cos phi = 1 3 A 30 V DC Relay output R1C inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1C inductive, cos phi = 0.4 7 ms 2 A 30 V DC Relay outpu
Line Current
63.5 A 380 V without line choke heavy duty) 50.5 A 480 V without line choke heavy duty) 67.9 A 480 V with external line choke normal duty) 54.4 A 380 V with external line choke heavy duty) 64.1 A 480 V with external line choke heavy du
Protection Type
Thermal protection motor Safe torque off motor Motor phase loss motor Thermal protection drive Safe torque off drive Overheating drive Overcurrent drive Output overcurrent between motor phase and earth drive Output

ATV340D22N4E Related Documents