Powermatic Associates Logo

LC1D115M7 Schneider Electric Industrial Automation Components

LC1D115M7 on Powermatic Associates
Schneider Electric

Part#:LC1D115M7

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1D115M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 200A for AC-1 and 115A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 120 mm. It offers a degree of protection of IP20 and operates with a control voltage (AC) of 176-253Vac (220Vac nominal; 50Hz/60Hz; 0.8...1.15 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 30kW at 220-230Vac to 80kW at 660-690Vac in AC-3, and it also features 1 normally closed (NC) auxiliary contact with a contact type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) varies from 30HP at 200-208Vac to 100HP at 575-600Vac for 3-phase, 50Hz/60Hz, UL/CSA. It boasts a mechanical durability of 8 million operations and an electrical durability of 950,000 operations with load, with a phase-to-phase rated voltage (AC) of 1000 V.

Product Details

  • Product Name
    TeSys D
  • Maximum Operating Rate
    2400 cyc/h 60 °C
  • Minimum Switching Voltage
    17 V signalling circuit
  • [Uc] Control Circuit Voltage
    220 V AC 50/60 Hz
  • Average Impedance
    0.6 mOhm - Ith 200 A 50 Hz power circuit
  • Range
    TeSys
  • Overvoltage Category
    III
  • Signalling Circuit Frequency
    25...400 Hz
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Rated Breaking Capacity
    1100 A 440 V power circuit IEC 60947
  • Product Or Component Type
    Contactor
  • [Ith] Conventional Free Air Thermal Current
    200 A 140 °F (60 °C) power circuit
  • Power Pole Contact Composition
    3 NO
  • Device Short Name
    LC1D
  • Front Cover
    With
  • Insulation Resistance
    > 10 MOhm signalling circuit
  • Control Circuit Type
    AC 50/60 Hz
  • Mechanical Durability
    8 Mcycles
  • Poles Description
    3P
  • [Uimp] Rated Impulse Withstand Voltage
    8 kV IEC 60947
  • Heat Dissipation
    3…8 W 50/60 Hz
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • Minimum Switching Current
    5 mA signalling circuit
  • Operating Time
    6...20 ms opening 20...50 ms closing
  • Contactor Application
    Motor control Resistive load
  • [Ie] Rated Operational Current
    200 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit 115 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit
  • [Ue] Rated Operational Voltage
    Power circuit <= 1000 V AC 25...400 Hz Power circuit <= 300 V DC
  • Power Dissipation Per Pole
    24 W AC-1 7.9 W AC-3
  • Electrical Durability
    0.8 Mcycles 200 A AC-1 <= 440 V 0.95 Mcycles 115 A AC-3 <= 440 V
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • Mounting Support
    Rail Plate
  • Hold-In Power Consumption In VA
    2…18 VA 60 Hz 0.3 68 °F (20 °C)) 2…18 VA 50 Hz 0.3 68 °F (20 °C))
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Inrush Power In VA
    280…350 VA 60 Hz 0.8 68 °F (20 °C)) 280…350 VA 50 Hz 0.8 68 °F (20 °C))
  • Connections - Terminals
    Control circuit screw clamp terminals 2 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²)flexible with cable end Control circuit screw clamp terminals 1 0.00…0.00 in² (1…2.5 mm²)fl
  • Utilisation Category
    AC-4 AC-1 AC-3
  • Associated Fuse Rating
    250 A gG <= 690 V type 1 power circuit 200 A gG <= 690 V type 2 power circuit 10 A gG signalling circuit
  • Tightening Torque
    Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals flat Ø 6 mm Control circuit 10.62 lbf.in (1.2 N.m) screw clamp terminals Philips No 2 Power circuit 106.21 lbf.in (12 N.m) connector hexagonal 0.16 in (4 mm)
  • Irms Rated Making Capacity
    1260 A 440 V power circuit IEC 60947 140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1
  • Control Circuit Voltage Limits
    0.3...0.5 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.15 Uc -40…131 °F (-40…55 °C) operational AC 50/60 Hz 1...1.15 Uc 131…158 °F (55…70 °C) operational AC 50/60 Hz
  • Motor Power HP (UL / CSA)
    30 hp 200/208 V at AC 50/60 Hz for 3 phase 40 hp 230/240 V at AC 50/60 Hz for 3 phase 75 hp 460/480 V at AC 50/60 Hz for 3 phase 100 hp 575/600 V at AC 50/60 Hz for 3 phase
  • [Icw] Rated Short-Time Withstand Current
    250 A 104 °F (40 °C) - 10 min power circuit 550 A 104 °F (40 °C) - 1 min power circuit 950 A 104 °F (40 °C) - 10 s power circuit 1100 A 104 °F (40 °C) - 1 s power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling ci
  • [Ui] Rated Insulation Voltage
    Power circuit 600 V CSA Power circuit 600 V UL Power circuit 1000 V IEC 60947-4-1 Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
  • Standards
    CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
  • Motor Power Kw
    30 kW 220...230 V AC 50/60 Hz AC-3) 55 kW 380...400 V AC 50/60 Hz AC-3) 59 kW 415...440 V AC 50/60 Hz AC-3) 75 kW 500 V AC 50/60 Hz AC-3) 80 kW 660...690 V AC 50/60 Hz AC-3) 65 kW 1000 V AC 50/60 Hz AC-3) 18.5 kW 400 V AC 50/
  • Product Certifications
    RINA CSA CCC BV LROS (Lloyds register of shipping) GL GOST DNV UL UKCA

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D115M7 on Powermatic Associates is $621.21. Order now.

LC1D115M7 Related Documents

Instruction Sheet-1631038662279.pdfProduct Datasheet-1631038662284.pdf

Similar products from: Schneider Electric Industrial Automation Components

DFCC2 on Powermatic Associates

DFCC2

Schneider Electric

Schneider Electric - DFCC2

14 in stock
M9F23204 on Powermatic Associates

M9F23204

Schneider Electric

Schneider Electric M9F23204 is a Miniature Circuit Breaker (MCB) within the C60SP sub-range, designed to provide circuit protection. This MCB features a 2-pole configuration with both poles protected, and it is rated for a current of 4A. It offers a short circuit breaking rating of 14kA AIR at 240Vac, and 10kA AIR at both 480Y/277Vac and 125Vdc. The M9F23204 is equipped with a D tripping curve, ensuring precise protection against overload and short-circuit conditions. This product is compliant with UL1077 standards for safety and performance.

3 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
M9F43230 on Powermatic Associates

M9F43230

Schneider Electric

Schneider Electric M9F43230 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 2-pole configuration and a rated current of 30A. It features a rated insulation voltage (Ui) of 500V, a DC rated voltage of 60Vdc, and an AC rated voltage of 240V phase-to-neutral and 415V phase-to-phase. The M9F43230 has a rated impulse voltage (Uimp) of 6kV and offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. Both poles are protected, and it is equipped with a D tripping curve. This MCB is compliant with UL489 standards.

22 in stock
LV426801 on Powermatic Associates

LV426801

Schneider Electric

Schneider Electric LV426801 is a coil designed for undervoltage release and tripping functions, compatible with both AC and DC control voltages. For DC, it operates at 24Vdc and instantaneously opens the circuit breaker when the undervoltage trip supply voltage falls to between 35% and 70% of its rated control voltage, allowing closing when the supply voltage reaches 85% of the rated control voltage. Similarly, for AC, it functions at 24Vac under the same conditions for opening and closing the circuit breaker based on the supply voltage's percentage of the rated control voltage.

26 in stock
LV426930 on Powermatic Associates

LV426930

Schneider Electric

Schneider Electric LV426930 is a direct-mount rotary handle designed for manual operation of circuit breakers. This part is black in color, facilitating its integration into various electrical panel setups without impacting the visual consistency of the installation.

6 in stock

Manufacturer warranty

LC1D115M7 Schneider Electric

$621.21

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$621.21

$621.21 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1D115M7 with other Industrial Automation Components products

Product Name

Maximum Operating Rate

Minimum Switching Voltage

[Uc] Control Circuit Volt...

Average Impedance

Range

Overvoltage Category

Signalling Circuit Freque...

Auxiliary Contact Composi...

Rated Breaking Capacity

Selected product

LC1D115M7
Backordered
LC1D115M7
Schneider Electric

Schneider Electric LC1D115M7 is a magnetic contactor from the Deca sub-range, featuring screw connec...

Product NameTeSys D

Maximum Operating Rate2400 cyc/h 60 °C

Minimum Switching Voltage17 V signalling circuit

[Uc] Control Circuit Voltage220 V AC 50/60 Hz

Average Impedance0.6 mOhm - Ith 200 A 50 Hz p...

RangeTeSys

Overvoltage CategoryIII

Signalling Circuit Frequency25...400 Hz

Auxiliary Contact Composition1 NO + 1 NC

Rated Breaking Capacity1100 A 440 V power circuit I...

LC1D256BD
41 in stock
LC1D256BD
Schneider Electric

Schneider Electric LC1D256BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs...

Product NameTeSys D

Maximum Operating Rate-

Minimum Switching Voltage-

[Uc] Control Circuit Voltage-

Average Impedance-

RangeTeSys

Overvoltage Category-

Signalling Circuit Frequency-

Auxiliary Contact Composition1 NO + 1 NC

Rated Breaking Capacity-

LC1D150G7
2 in stock
LC1D150G7
Schneider Electric

Schneider Electric LC1D150G7 is a magnetic contactor from the Deca sub-range, designed with screw co...

Product NameTeSys D

Maximum Operating Rate-

Minimum Switching Voltage-

[Uc] Control Circuit Voltage-

Average Impedance-

RangeTeSys

Overvoltage Category-

Signalling Circuit Frequency-

Auxiliary Contact Composition1 NO + 1 NC

Rated Breaking Capacity-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D150G7 on Powermatic Associates

LC1D150G7

Verified stock: 2

Schneider Electric LC1D150G7 is a magnetic contactor from the Deca sub-range, designed with screw connections and three poles (3P; 3NO). It has a rated current of 200A for AC-1 and 150A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 120 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (AC) range of 96-138Vac (120Vac nominal; 50Hz/60Hz; 0.8...1.15 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it features 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 40kW at 220-230Vac to 100kW at 660-690Vac in AC-3 conditions. Additionally, it includes 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) varies from 40HP at 200-208Vac to 125HP at 575-600Vac for 3-phase, 50Hz/60Hz, UL/CSA. The mechanical durability of the LC1D150G7 is rated at 8 million operations at no load, and its electrical durability with load is 850,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

LC1D186BL on Powermatic Associates

LC1D186BL

Verified stock: 2

Schneider Electric LC1D186BL is a magnetic contactor from the Deca sub-range, designed with a low-consumption coil that consumes less than 2.4W. It features ring-lugs connections and is equipped with three poles (3P; 3NO), supporting a rated current of 32A for AC-1 and 18A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) range of 19.2-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and it can handle rated active power ranging from 4kW at 220-230Vac to 10kW at 660-690Vac in AC-3. Additionally, it has 1 normally closed (NC) auxiliary contact with contacts type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) varies from 1HP at 115Vac in single-phase to 15HP at 575-600Vac in three-phase, under UL/CSA standards. Its mechanical durability is up to 15 million operations at no load, and its electrical durability reaches 1.6 million operations with load. The rated voltage (AC) phase-to-phase is 690 V, and its power consumption is specified at 2.4 W.

Schneider Electric

LC1D956BD on Powermatic Associates

LC1D956BD

Verified stock: 2

Schneider Electric LC1D956BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 125A (AC-1) and 95A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 20.4-26.4Vdc (24Vdc nom.; 0.85...1.1 x Uc). The rated operating voltage (Ue) is 1000 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power (kW) spans from 25kW at 220-230Vac to 45kW at 1000Vac in AC-3 category, and it supports rated power (HP) up to 60HP for various voltages and phases under UL/CSA standards. The mechanical durability of the LC1D956BD is rated at 4,000,000 operations, and its electrical durability, with load, is 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

Schneider Electric

LC1D093BD on Powermatic Associates

LC1D093BD

Verified stock: 35

Schneider Electric LC1D093BD is a magnetic contactor from the Deca sub-range, featuring spring connections and designed with 3 poles (3P; 3NO). It has a rated current of 16A for AC-1 and 9A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection rated at IP20 and operates with a control voltage (DC) range of 18-30Vdc, with a nominal 24Vdc. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV. Its rated active power capacity spans from 2.2kW at 220-230Vac to 5.5kW at 660-690Vac in AC-3 conditions. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 0.33HP at 115Vac to 7.5HP at 575-600Vac, covering both single-phase and 3-phase configurations under UL/CSA standards. The mechanical durability of the LC1D093BD is rated at 15 million operations at no load, and its electrical durability with load is rated at 2 million operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

FAQ

What is the price of LC1D115M7?
Purchase the LC1D115M7 from Powermatic Associates at the price of $621.21. Order today.

Out if stock but available for backorder.

Schneider Electric LC1D115M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 200A for AC-1 and 115A for 440Vac in AC-3. This contactor is suitable for DIN rail mounting and has a net width of 120 mm. It offers a degree of protection of IP20 and operates with a control voltage (AC) of 176-253Vac (220Vac nominal; 50Hz/60Hz; 0.8...1.15 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 30kW at 220-230Vac to 80kW at 660-690Vac in AC-3, and it also features 1 normally closed (NC) auxiliary contact with a contact type of 1NO+1NC instantaneous aux. The rated power in horsepower (HP) varies from 30HP at 200-208Vac to 100HP at 575-600Vac for 3-phase, 50Hz/60Hz, UL/CSA. It boasts a mechanical durability of 8 million operations and an electrical durability of 950,000 operations with load, with a phase-to-phase rated voltage (AC) of 1000 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock