Powermatic Associates Logo

LC1D256BD Schneider Electric Industrial Automation Components

LC1D256BD on Powermatic Associates
Schneider Electric

Part#:LC1D256BD

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1D256BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 40A (AC-1) and 25A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 18-30Vdc (24Vdc nom.; 0.75...1.25 x Uc). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power ranges from 5.5kW at 220-230Vac to 15kW at 660-690Vac in AC-3 category. The rated power (HP) varies from 2HP at 115Vac to 20HP at 575-600Vac, covering both single-phase and three-phase applications, compliant with UL/CSA standards. The mechanical durability of the LC1D256BD is rated at 15 million operations, and its electrical durability with load is 1.6 million operations. The rated voltage (AC) for phase-to-phase connections is 690 V.

Product Details

  • Range
    TeSys
  • Control Circuit Type
    DC standard
  • Rated Breaking Capacity
    450 A 440 V power circuit IEC 60947
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV IEC 60947
  • Minimum Switching Voltage
    17 V signalling circuit
  • Overvoltage Category
    III
  • Mechanical Durability
    30 Mcycles
  • Signalling Circuit Frequency
    25...400 Hz
  • Insulation Resistance
    > 10 MOhm signalling circuit
  • Product Name
    TeSys D
  • [Uc] Control Circuit Voltage
    24 V DC
  • Time Constant
    28 ms
  • Device Short Name
    LC1D
  • Hold-In Power Consumption In W
    5.4 W 68 °F (20 °C)
  • Average Impedance
    2 mOhm - Ith 40 A 50 Hz power circuit
  • Power Pole Contact Composition
    3 NO
  • Product Or Component Type
    Contactor
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Front Cover
    With
  • Maximum Operating Rate
    3600 cyc/h 140 °F (60 °C)
  • Poles Description
    3P
  • Inrush Power In W
    5.4 W 68 °F (20 °C))
  • Minimum Switching Current
    5 mA signalling circuit
  • Coil Technology
    Built-in bidirectional peak limiting diode suppressor
  • Contactor Application
    Motor control Resistive load
  • [Ith] Conventional Free Air Thermal Current
    10 A 140 °F (60 °C) signalling circuit 40 A 140 °F (60 °C) power circuit
  • [Ue] Rated Operational Voltage
    Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
  • [Ie] Rated Operational Current
    25 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit 40 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
  • Mounting Support
    Rail Plate
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Operating Time
    53.55...72.45 ms closing 16...24 ms opening
  • Electrical Durability
    1.65 Mcycles 25 A AC-3 <= 440 V 1.4 Mcycles 40 A AC-1 <= 440 V
  • Connections - Terminals
    Control circuit lugs-ring terminals 0.31 in (8 mm)) Power circuit lugs-ring terminals 0.39 in (10 mm))
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • Power Dissipation Per Pole
    3.2 W AC-1 1.25 W AC-3
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 40 A gG <= 690 V type 2 power circuit
  • Utilisation Category
    AC-3 AC-1 AC-4
  • Irms Rated Making Capacity
    140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 450 A 440 V power circuit IEC 60947
  • Control Circuit Voltage Limits
    0.1...0.25 Uc -40…158 °F (-40…70 °C) drop-out DC 0.7...1.25 Uc -40…140 °F (-40…60 °C) operational DC 1...1.25 Uc 140…158 °F (60…70 °C) operational DC
  • Tightening Torque
    Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals flat Ø 6 mm M3.5 Control circuit 15.05 lbf.in (1.7 N.m) lugs-ring terminals Philips No 2 M3.5 Power circuit 22.13 lbf.in (2.5 N.m) lugs-ring terminals flat Ø 8 mm M4 Power circuit 2
  • [Ui] Rated Insulation Voltage
    Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
  • Motor Power HP (UL / CSA)
    3 hp 230/240 V at AC 50/60 Hz for 1 phase 2 hp 115 V at AC 50/60 Hz for 1 phase 7.5 hp 230/240 V at AC 50/60 Hz for 3 phase 15 hp 460/480 V at AC 50/60 Hz for 3 phase 20 hp 575/600 V at AC 50/60 Hz for 3 phase 7.5 hp 200/208 V at
  • Motor Power Kw
    5.5 kW 220...230 V AC 50/60 Hz AC-3) 11 kW 380...400 V AC 50/60 Hz AC-3) 11 kW 415...440 V AC 50/60 Hz AC-3) 15 kW 500 V AC 50/60 Hz AC-3) 15 kW 660...690 V AC 50/60 Hz AC-3) 5.5 kW 400 V AC 50/60 Hz AC-4)
  • Standards
    CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
  • [Icw] Rated Short-Time Withstand Current
    240 A 104 °F (40 °C) - 10 s power circuit 380 A 104 °F (40 °C) - 1 s power circuit 50 A 104 °F (40 °C) - 10 min power circuit 120 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
  • Product Certifications
    BV UL DNV CSA GL GOST LROS (Lloyds register of shipping) CCC RINA

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D256BD on Powermatic Associates is $223.37. Order now.

LC1D256BD Related Documents

Instruction Sheet-1631039191317.pdfProduct Datasheet-1631039191310.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock
M9XCTC15 on Powermatic Associates

M9XCTC15

Schneider Electric

Schneider Electric M9XCTC15 is a cover designed specifically for use with M9XC comb busbars. It belongs to the Comb busbars sub-range and serves as a Multi 9 - tooth cover. This product comes as a set of 5, tailored to enhance the application and integration of M9XC comb busbars within electrical installations.

10 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock

Manufacturer warranty

LC1D256BD Schneider Electric

$223.37

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$223.37

$223.37 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1D256BD with other Industrial Automation Components products

Range

Control Circuit Type

Rated Breaking Capacity

[Uimp] Rated Impulse With...

Minimum Switching Voltage

Overvoltage Category

Mechanical Durability

Signalling Circuit Freque...

Insulation Resistance

Product Name

Selected product

LC1D256BD
Backordered
LC1D256BD
Schneider Electric

Schneider Electric LC1D256BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs...

RangeTeSys

Control Circuit TypeDC standard

Rated Breaking Capacity450 A 440 V power circuit IE...

[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947

Minimum Switching Voltage17 V signalling circuit

Overvoltage CategoryIII

Mechanical Durability30 Mcycles

Signalling Circuit Frequency25...400 Hz

Insulation Resistance> 10 MOhm signalling circuit

Product NameTeSys D

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

RangeTeSys

Control Circuit TypeDC standard

Rated Breaking Capacity-

[Uimp] Rated Impulse Withstand Voltage-

Minimum Switching Voltage-

Overvoltage Category-

Mechanical Durability-

Signalling Circuit Frequency-

Insulation Resistance-

Product NameTeSys D

DFCC2
14 in stock
DFCC2
Schneider Electric

Schneider Electric - DFCC2

RangeTeSys

Control Circuit Type-

Rated Breaking Capacity-

[Uimp] Rated Impulse Withstand Voltage-

Minimum Switching Voltage-

Overvoltage Category-

Mechanical Durability-

Signalling Circuit Frequency-

Insulation Resistance-

Product NameTeSys DF

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

MDI1FRD23A7-N on Powermatic Associates

MDI1FRD23A7-N

Novanta IMS

Novanta IMS MDI1FRD23A7-N is a stepper motor within the Stepper motors sub-range, featuring an integrated driver and a 2-phase DC stepper motor design. It includes a rear control knob and a single motor stack in its Plus version, which encompasses standard features. This part offers a connection through 30cm / 12" bare end flying leads with a 10-pin IDC non-locking connector. It supports RS-422 and RS-485 communication protocols. The supply voltage requirement ranges from 12Vdc to 75Vdc, with optimal performance at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with a 57x57mm flange. The operational ambient air temperature range is from 0 to +85°C. It has an IP20 degree of protection, a moment of inertia of 0.18kg.cm^2, a stall torque of 64N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D50ABD on Powermatic Associates

LC1D50ABD

Verified stock: 0

Schneider Electric LC1D50ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor supports a rated current of 80A for AC-1 and 50A for 440Vac in AC-3 applications. It is designed for DIN rail mounting and has a net width of 55 mm. The device offers an IP20 degree of protection and operates with a control voltage of 18-30Vdc (24Vdc nominal). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. It delivers rated active power ranging from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3, and rated power in horsepower (HP) from 3HP at 115Vac to 40HP at 575-600Vac, covering various configurations and voltages for UL/CSA standards. The mechanical durability of the LC1D50ABD is rated at 6,000,000 operations, and its electrical durability with load is 1,450,000 operations. The rated voltage for phase-to-phase applications is 690 V.

Schneider Electric

LC1D65008B7 on Powermatic Associates

LC1D65008B7

Verified stock: 0

Schneider Electric LC1D65008B7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 4 poles (2NO+2NC). It has a rated current of 80A under AC-1 conditions and is suitable for DIN rail mounting. The contactor measures 85 mm in net width and offers an IP20 degree of protection. It operates with a control voltage range of 19.2-26.4Vac at 50Hz (24Vac nominal; 0.8...1.1 x Uc) and 20.4-26.4Vac at 60Hz (24Vac nominal; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 690 V, and it has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated impulse voltage (Uimp) is 6 kV, and it boasts a mechanical durability of 15,000,000 operations at no load. The rated voltage for phase-to-phase applications is 690 V AC.

Schneider Electric

LC1D80G6 on Powermatic Associates

LC1D80G6

Verified stock: 0

Schneider Electric LC1D80G6 is a magnetic contactor from the Deca sub-range, designed with screw connections and three poles (3P; 3NO). It has a rated current of 125A for AC-1 and 80A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection rated at IP20 and operates with a control voltage of 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it features 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW at 220-230Vac to 55kW at 500Vac in AC-3 conditions. The rated power in horsepower (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase conditions, according to UL/CSA standards. The mechanical durability of the LC1D80G6 is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage for phase-to-phase connections is 1000 V.

Schneider Electric

LC1D80G7 on Powermatic Associates

LC1D80G7

Verified stock: 0

Schneider Electric LC1D80G7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 3 poles (3P; 3NO). It has a rated current of 125A (AC-1) and 80A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 96-132Vac (120Vac nominal; 50Hz; 0.8...1.1 x Uc) to 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 Normally Open (NO) auxiliary contact and 1 Normally Closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor supports rated active power ranging from 22kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. The rated power (HP) varies from 7.5HP at 115Vac single-phase to 60HP at 575-600Vac three-phase, under UL/CSA standards. It boasts a mechanical durability of 4,000,000 operations and an electrical durability of 1,500,000 operations with load, at a phase-to-phase rated voltage of 1000 V.

Schneider Electric

FAQ

What is the price of LC1D256BD?
Purchase the LC1D256BD from Powermatic Associates at the price of $223.37. Order today.

Out if stock but available for backorder.

Schneider Electric LC1D256BD is a magnetic contactor from the Deca sub-range, designed for ring-lugs connections. It features 3 poles (3P; 3NO) and is rated for currents of 40A (AC-1) and 25A (440Vac; AC-3). This contactor is suitable for DIN rail mounting and has a net width of 45 mm. It offers a degree of protection of IP20 and operates with a control voltage (DC) of 18-30Vdc (24Vdc nom.; 0.75...1.25 x Uc). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power ranges from 5.5kW at 220-230Vac to 15kW at 660-690Vac in AC-3 category. The rated power (HP) varies from 2HP at 115Vac to 20HP at 575-600Vac, covering both single-phase and three-phase applications, compliant with UL/CSA standards. The mechanical durability of the LC1D256BD is rated at 15 million operations, and its electrical durability with load is 1.6 million operations. The rated voltage (AC) for phase-to-phase connections is 690 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts