Powermatic Associates Logo

LC1D25X7 Schneider Electric Industrial Automation Components

LC1D25X7 on Powermatic Associates
Schneider Electric

Part#:LC1D25X7

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LC1D25X7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 40A for AC-1 and 25A for 440Vac in AC-3 conditions. Designed for DIN rail mounting, this contactor has a net width of 45 mm and offers a degree of protection rated at IP20. The control voltage (AC) ranges from 480-660Vac at 50Hz and 510-660Vac at 60Hz, with a nominal voltage of 600Vac. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and the rated active power spans from 5.5kW at 220-230Vac to 15kW at 660-690Vac in AC-3 conditions. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 2HP at 115Vac to 20HP at 575-600Vac, covering both single-phase and three-phase applications. This contactor is built to withstand 15 million mechanical operations at no load and 1.6 million electrical operations with load, ensuring durability. The rated voltage for phase-to-phase applications is 690 V.

Product Details

  • Control Circuit Type
    AC 50/60 Hz
  • Overvoltage Category
    III
  • Rated Breaking Capacity
    450 A 440 V power circuit IEC 60947
  • Device Short Name
    LC1D
  • Product Name
    TeSys D
  • Auxiliary Contact Composition
    1 NO + 1 NC
  • Mechanical Durability
    15 Mcycles
  • Insulation Resistance
    > 10 MOhm signalling circuit
  • Product Or Component Type
    Contactor
  • [Uimp] Rated Impulse Withstand Voltage
    6 kV IEC 60947
  • Average Impedance
    2 mOhm - Ith 40 A 50 Hz power circuit
  • Minimum Switching Current
    5 mA signalling circuit
  • Power Pole Contact Composition
    3 NO
  • Coil Technology
    Without built-in suppressor module
  • Signalling Circuit Frequency
    25...400 Hz
  • Maximum Operating Rate
    3600 cyc/h 140 °F (60 °C)
  • Poles Description
    3P
  • Range
    TeSys
  • [Uc] Control Circuit Voltage
    600 V AC 50/60 Hz
  • Front Cover
    With
  • Heat Dissipation
    2…3 W 50/60 Hz
  • Minimum Switching Voltage
    17 V signalling circuit
  • Mounting Support
    Plate Rail
  • [Ith] Conventional Free Air Thermal Current
    10 A 140 °F (60 °C) signalling circuit 40 A 140 °F (60 °C) power circuit
  • Contactor Application
    Motor control Resistive load
  • Safety Reliability Level
    B10d = 1369863 cycles contactor with nominal load EN/ISO 13849-1 B10d = 20000000 cycles contactor with mechanical load EN/ISO 13849-1
  • [Ue] Rated Operational Voltage
    Power circuit <= 690 V AC 25...400 Hz Power circuit <= 300 V DC
  • Auxiliary Contacts Type
    Mechanically linked 1 NO + 1 NC IEC 60947-5-1 Mirror contact 1 NC IEC 60947-4-1
  • Operating Time
    12...22 ms closing 4...19 ms opening
  • [Ie] Rated Operational Current
    25 A 140 °F (60 °C)) <= 440 V AC AC-3 power circuit 40 A 140 °F (60 °C)) <= 440 V AC AC-1 power circuit
  • Power Dissipation Per Pole
    3.2 W AC-1 1.25 W AC-3
  • Inrush Power In VA
    70 VA 60 Hz 0.75 68 °F (20 °C)) 70 VA 50 Hz 0.75 68 °F (20 °C))
  • Electrical Durability
    1.65 Mcycles 25 A AC-3 <= 440 V 1.4 Mcycles 40 A AC-1 <= 440 V
  • Non-Overlap Time
    1.5 ms on de-energisation between NC and NO contact 1.5 ms on energisation between NC and NO contact
  • Hold-In Power Consumption In VA
    7.5 VA 60 Hz 0.3 68 °F (20 °C)) 7 VA 50 Hz 0.3 68 °F (20 °C))
  • Utilisation Category
    AC-4 AC-3 AC-1
  • Associated Fuse Rating
    10 A gG signalling circuit IEC 60947-5-1 63 A gG <= 690 V type 1 power circuit 40 A gG <= 690 V type 2 power circuit
  • Irms Rated Making Capacity
    140 A AC signalling circuit IEC 60947-5-1 250 A DC signalling circuit IEC 60947-5-1 450 A 440 V power circuit IEC 60947
  • Connections - Terminals
    Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 2 0.00…0.01 in² (1…4 mm²)flexible without cable end Control circuit screw clamp terminals 1 0.00…0.01 in² (1…4 mm²)fl
  • Tightening Torque
    Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals flat Ø 6 mm Control circuit 15.05 lbf.in (1.7 N.m) screw clamp terminals Philips No 2 Power circuit 22.13 lbf.in (2.5 N.m) screw clamp terminals flat Ø 6 mm Power circuit 22.13 lb
  • Control Circuit Voltage Limits
    0.3...0.6 Uc -40…158 °F (-40…70 °C) drop-out AC 50/60 Hz 0.8...1.1 Uc -40…140 °F (-40…60 °C) operational AC 50 Hz 0.85...1.1 Uc -40…140 °F (-40…60 °C) operational AC 60 Hz 1...1.1 Uc 140…158 °F (60…70 °C) operational AC 50/60 Hz
  • Standards
    CSA C22.2 No 14 EN 60947-4-1 EN 60947-5-1 IEC 60947-4-1 IEC 60947-5-1 UL 508
  • Motor Power HP (UL / CSA)
    3 hp 230/240 V at AC 50/60 Hz for 1 phase 2 hp 115 V at AC 50/60 Hz for 1 phase 7.5 hp 230/240 V at AC 50/60 Hz for 3 phase 15 hp 460/480 V at AC 50/60 Hz for 3 phase 20 hp 575/600 V at AC 50/60 Hz for 3 phase 7.5 hp 200/208 V at
  • [Ui] Rated Insulation Voltage
    Power circuit 690 V IEC 60947-4-1 Power circuit 600 V CSA Power circuit 600 V UL Signalling circuit 690 V IEC 60947-1 Signalling circuit 600 V CSA Signalling circuit 600 V UL
  • Motor Power Kw
    5.5 kW 220...230 V AC 50/60 Hz AC-3) 11 kW 380...400 V AC 50/60 Hz AC-3) 11 kW 415...440 V AC 50/60 Hz AC-3) 15 kW 500 V AC 50/60 Hz AC-3) 15 kW 660...690 V AC 50/60 Hz AC-3) 5.5 kW 400 V AC 50/60 Hz AC-4)
  • [Icw] Rated Short-Time Withstand Current
    240 A 104 °F (40 °C) - 10 s power circuit 380 A 104 °F (40 °C) - 1 s power circuit 50 A 104 °F (40 °C) - 10 min power circuit 120 A 104 °F (40 °C) - 1 min power circuit 100 A - 1 s signalling circuit 120 A - 500 ms signalling circ
  • Product Certifications
    CCC UL GL RINA DNV LROS (Lloyds register of shipping) CSA GOST BV

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of LC1D25X7 on Powermatic Associates is $178.99. Order now.

LC1D25X7 Related Documents

Instruction Sheet-1631038982489.pdfProduct Datasheet-1631038982487.pdf

Similar products from: Schneider Electric Industrial Automation Components

M9A26969 on Powermatic Associates

M9A26969

Schneider Electric

Schneider Electric M9A26969 is a tripping coil designed for undervoltage trip coil release (MNx) applications. It belongs to the sub-range of tripping coils and is engineered for DIN rail mounting. This part operates with a control voltage of 230Vac AC.

0 in stock
XB7EV04MP on Powermatic Associates

XB7EV04MP

Schneider Electric

Schneider Electric XB7EV04MP is a monolithic pilot light designed for signaling applications, featuring an integral LED for illumination. This component, part of the XB7 sub-range, is constructed with a plastic body and has a round shape. It offers a rated impulse voltage (Uimp) of 6 kV and is protected to a degree of IP65, NEMA 4, and NEMA 12, ensuring its suitability for various industrial environments. The pilot light operates on a network frequency of 50/60 Hz and requires a supply voltage of 230 V AC. It has a diameter of 22 mm, with net dimensions of 29 mm in height, 54 mm in depth, and 29 mm in width. The light emitted by the LED is red, and it features screw-clamp type terminals for connection.

0 in stock
MG17416 on Powermatic Associates

MG17416

Schneider Electric

Schneider Electric MG17416 is a Miniature Circuit Breaker (MCB) designed as a supplementary protector within the C60 UL1077 sub-range. It features a rated current of 15A and operates on a single pole (1 Pole(s)) configuration. The rated operating voltage (Ue) for this MCB is 277 V. It offers a short circuit breaking rating of 10kA AIR at 240Vac, 5kA AIR at 277Vac, and 10kA AIR at 65Vdc, with protection extended to 1 Pole(s). The tripping curve for this device is classified as type C.

0 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
M9F43306 on Powermatic Associates

M9F43306

Schneider Electric

Schneider Electric M9F43306 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed for three-phase applications with a 3 Pole configuration. It has a rated current of 6A and offers a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It features a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it utilizes a D tripping curve.

2 in stock
M9F42206 on Powermatic Associates

M9F42206

Schneider Electric

Schneider Electric M9F42206 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed to provide circuit protection. This MCB features a 2-pole configuration and is rated for a current of 6A. It is equipped with a rated insulation voltage (Ui) of 500V, a DC rated voltage of 60Vdc, and an AC rated voltage of 240V phase-to-neutral and 415V phase-to-phase. The M9F42206 has a rated impulse voltage (Uimp) of 6kV and offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. Both poles are protected, and it features a C tripping curve. This MCB is compliant with UL489 standards.

8 in stock

Manufacturer warranty

LC1D25X7 Schneider Electric

$178.99

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$178.99

$178.99 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare LC1D25X7 with other Industrial Automation Components products

Control Circuit Type

Overvoltage Category

Rated Breaking Capacity

Device Short Name

Product Name

Auxiliary Contact Composi...

Mechanical Durability

Insulation Resistance

Product Or Component Type

[Uimp] Rated Impulse With...

Selected product

LC1D25X7
Backordered
LC1D25X7
Schneider Electric

Schneider Electric LC1D25X7 is a magnetic contactor from the Deca sub-range, featuring screw connect...

Control Circuit TypeAC 50/60 Hz

Overvoltage CategoryIII

Rated Breaking Capacity450 A 440 V power circuit IE...

Device Short NameLC1D

Product NameTeSys D

Auxiliary Contact Composition1 NO + 1 NC

Mechanical Durability15 Mcycles

Insulation Resistance> 10 MOhm signalling circuit

Product Or Component TypeContactor

[Uimp] Rated Impulse Withstand Voltage6 kV IEC 60947

LC1D50A6BD
2 in stock
LC1D50A6BD
Schneider Electric

Schneider Electric LC1D50A6BD is a magnetic contactor from the Deca sub-range, featuring an EverLink...

Control Circuit Type-

Overvoltage Category-

Rated Breaking Capacity-

Device Short NameLC1D

Product NameTeSys D

Auxiliary Contact Composition-

Mechanical Durability-

Insulation Resistance-

Product Or Component TypeContactor

[Uimp] Rated Impulse Withstand Voltage-

LC1D40ABD
2 in stock
LC1D40ABD
Schneider Electric

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM)...

Control Circuit Type-

Overvoltage Category-

Rated Breaking Capacity-

Device Short NameLC1D

Product NameTeSys D

Auxiliary Contact Composition-

Mechanical Durability-

Insulation Resistance-

Product Or Component TypeContactor

[Uimp] Rated Impulse Withstand Voltage-

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

Relevant products

LC1D40ABD on Powermatic Associates

LC1D40ABD

Verified stock: 2

Schneider Electric LC1D40ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor is rated for currents of 60A (AC-1) and 40A (440Vac; AC-3), with a mounting mode suitable for DIN rail installation. It has a net width of 55 mm and offers a degree of protection rated at IP20. The control voltage (DC) ranges from 18-30Vdc, with a nominal 24Vdc, and it operates at a rated voltage (Ue) of up to 690 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. Its rated active power spans from 11kW at 220-230Vac to 30kW at 660-690Vac in AC-3 category. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 30HP at 575-600Vac in three-phase, under UL/CSA standards. The mechanical durability of the LC1D40ABD is up to 6,000,000 operations, and its electrical durability with load reaches 1,500,000 operations. The rated voltage for phase-to-phase connections is 690 V.

Schneider Electric

LC1D50A6BD on Powermatic Associates

LC1D50A6BD

Verified stock: 2

Schneider Electric LC1D50A6BD is a magnetic contactor from the Deca sub-range, featuring an EverLink(TM) terminal design for ring-lugs connections. This 3-pole (3P; 3NO) contactor supports a rated current of 80A for AC-1 applications and 50A for 440Vac AC-3 applications. It is designed for DIN rail mounting and has a net width of 55 mm. The LC1D50A6BD offers a degree of protection of IP20 and operates with a control voltage (DC) of 18-30Vdc (24Vdc nominal; 0.75...1.25 x Uc). Its rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV. This contactor can handle rated active power ranging from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3 applications. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 3HP at 115Vac in single-phase to 40HP at 575-600Vac in three-phase applications, according to UL/CSA standards. Its mechanical durability is rated at 6 million operations at no load, and its electrical durability is rated at 1.45 million operations with load. The rated voltage (AC) for phase-to-phase applications is 690 V.

Schneider Electric

LC1D50ABD on Powermatic Associates

LC1D50ABD

Verified stock: 0

Schneider Electric LC1D50ABD is a magnetic contactor from the Deca sub-range, featuring EverLink(TM) terminal design and screw connections. This 3-pole (3P; 3NO) contactor supports a rated current of 80A for AC-1 and 50A for 440Vac in AC-3 applications. It is designed for DIN rail mounting and has a net width of 55 mm. The device offers an IP20 degree of protection and operates with a control voltage of 18-30Vdc (24Vdc nominal). The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 6 kV. It delivers rated active power ranging from 15kW at 220-230Vac to 33kW at 660-690Vac in AC-3, and rated power in horsepower (HP) from 3HP at 115Vac to 40HP at 575-600Vac, covering various configurations and voltages for UL/CSA standards. The mechanical durability of the LC1D50ABD is rated at 6,000,000 operations, and its electrical durability with load is 1,450,000 operations. The rated voltage for phase-to-phase applications is 690 V.

Schneider Electric

LC1D65008B7 on Powermatic Associates

LC1D65008B7

Verified stock: 0

Schneider Electric LC1D65008B7 is a magnetic contactor from the Deca sub-range, featuring screw connections and designed with 4 poles (2NO+2NC). It has a rated current of 80A under AC-1 conditions and is suitable for DIN rail mounting. The contactor measures 85 mm in net width and offers an IP20 degree of protection. It operates with a control voltage range of 19.2-26.4Vac at 50Hz (24Vac nominal; 0.8...1.1 x Uc) and 20.4-26.4Vac at 60Hz (24Vac nominal; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 690 V, and it has no normally open (NO) or normally closed (NC) auxiliary contacts. The rated impulse voltage (Uimp) is 6 kV, and it boasts a mechanical durability of 15,000,000 operations at no load. The rated voltage for phase-to-phase applications is 690 V AC.

Schneider Electric

LC1D80G6 on Powermatic Associates

LC1D80G6

Verified stock: 0

Schneider Electric LC1D80G6 is a magnetic contactor from the Deca sub-range, designed with screw connections and three poles (3P; 3NO). It has a rated current of 125A for AC-1 and 80A for 440Vac in AC-3 conditions. This contactor is suitable for DIN rail mounting and has a net width of 85 mm. It offers a degree of protection rated at IP20 and operates with a control voltage of 102-132Vac (120Vac nominal; 60Hz; 0.85...1.1 x Uc). The rated operating voltage (Ue) is up to 1000 V, and it features 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. Its rated active power ranges from 22kW at 220-230Vac to 55kW at 500Vac in AC-3 conditions. The rated power in horsepower (HP) varies from 7.5HP at 115Vac in single-phase to 60HP at 575-600Vac in three-phase conditions, according to UL/CSA standards. The mechanical durability of the LC1D80G6 is rated at 4,000,000 operations, and its electrical durability with load is 1,500,000 operations. The rated voltage for phase-to-phase connections is 1000 V.

Schneider Electric

FAQ

What is the price of LC1D25X7?
Purchase the LC1D25X7 from Powermatic Associates at the price of $178.99. Order today.

Out if stock but available for backorder.

Schneider Electric LC1D25X7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 40A for AC-1 and 25A for 440Vac in AC-3 conditions. Designed for DIN rail mounting, this contactor has a net width of 45 mm and offers a degree of protection rated at IP20. The control voltage (AC) ranges from 480-660Vac at 50Hz and 510-660Vac at 60Hz, with a nominal voltage of 600Vac. The rated operating voltage (Ue) is up to 690 V, and it includes 1 normally open (NO) auxiliary contact. The rated impulse voltage (Uimp) is 6 kV, and the rated active power spans from 5.5kW at 220-230Vac to 15kW at 660-690Vac in AC-3 conditions. It also features 1 normally closed (NC) auxiliary contact and instantaneous auxiliary contacts type of 1NO+1NC. The rated power in horsepower (HP) varies from 2HP at 115Vac to 20HP at 575-600Vac, covering both single-phase and three-phase applications. This contactor is built to withstand 15 million mechanical operations at no load and 1.6 million electrical operations with load, ensuring durability. The rated voltage for phase-to-phase applications is 690 V.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock