Powermatic Associates Logo

LUCM12BL Schneider Electric Industrial Automation Components

LUCM12BL on Powermatic Associates
Schneider Electric

Part#:LUCM12BL

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric LUCM12BL is a multifunctional control unit within the Ultra sub-range, designed with a built-in LCD display operating at 24Vdc and equipped with an RJ45 connector for RS-485 port connectivity. It supports 1-pole (1P), 2-poles (2P), and 3-poles (3P) configurations. The unit offers a comprehensive suite of protection functions including Thermal overload classes 5, 10, 10A, 20, and 30, overload current protection (14.2 x intensity setting), short-circuits protection (14.2 x max. current), missing or unbalanced phases, and insulation fault. It is designed with a degree of protection rated at IP20 and IP40, contains 0 Normally Open (NO) auxiliary contacts, and 0 Normally Closed (NC) auxiliary contacts. The rated active power of the LUCM12BL is 5.5kW for 400/440Vac and 500Vac at 50/60Hz, and 9kW for 600Vac at 50/60Hz.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
VW3A9921 on Powermatic Associates

VW3A9921

Schneider Electric

Schneider Electric VW3A9921 is an adapter designed for direct circuit breaker mounting. This mechanical adapter kit facilitates the integration of components by providing a compatible interface for secure and straightforward installation.

12 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock

Manufacturer warranty

LUCM12BL Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

LUCM05BL on Powermatic Associates

LUCM05BL

Verified stock: 0

Schneider Electric LUCM05BL is a multifunctional control unit within the Ultra sub-range, designed with a built-in LCD display operating at 24Vdc and featuring an RJ45 connector for RS-485 port connectivity. It supports 1-pole (1P), 2-poles (2P), and 3-poles (3P) configurations. The unit offers a comprehensive suite of protection functions including Thermal overload classes 5, 10, 10A, 20, and 30, overload current protection (14.2 x intensity setting), short-circuits protection (14.2 x max. current), missing or unbalanced phases, and insulation fault. It is equipped with a degree of protection rated at IP20 and IP40, contains 0 Normally Open (NO) auxiliary contacts, and 0 Normally Closed (NC) auxiliary contacts. The rated active power of the LUCM05BL is specified as 1.5kW for 400/440Vac at 50/60Hz, 2.2kW for 500Vac at 50/60Hz, and 3kW for 600Vac at 50/60Hz.

Schneider Electric

LUCM32BL on Powermatic Associates

LUCM32BL

Verified stock: 0

Schneider Electric LUCM32BL is a multifunctional control unit within the Ultra sub-range, designed with a built-in LCD display operating at 24Vdc and featuring an RJ45 connector for RS-485 port connectivity. It supports 1-pole (1P), 2-poles (2P), and 3-poles (3P) configurations. The unit offers a comprehensive suite of protection functions including Thermal overload classes 5, 10, 10A, 20, and 30, overload current protection (14.2 x intensity setting), short-circuits protection (14.2 x max. current), missing or unbalanced phases, and insulation fault. It is equipped with a degree of protection rated at IP20 and IP40, contains 0 Normally Open (NO) auxiliary contacts, and 0 Normally Closed (NC) auxiliary contacts. The rated active power of the LUCM32BL is 15kW for 400/440Vac and 500Vac at 50/60Hz, and 18.5kW for 600Vac at 50/60Hz.

Schneider Electric

LUCMX6BL on Powermatic Associates

LUCMX6BL

Verified stock: 0

Schneider Electric LUCMX6BL is a multifunctional control unit within the Ultra sub-range, designed with a built-in LCD display operating at 24Vdc and featuring an RJ45 connector for RS-485 port connectivity. It supports configurations of 1-pole (1P), 2-poles (2P), and 3-poles (3P). The unit offers a comprehensive range of protection functions including Thermal overload classes 5, 10, 10A, 20, and 30, overload current protection at 14.2 times the intensity setting, short-circuit protection at 14.2 times the maximum current, as well as protection against missing or unbalanced phases and insulation faults. It is designed with a degree of protection rated at IP20 and IP40, contains no Normally Open (NO) auxiliary contacts, and no Normally Closed (NC) auxiliary contacts. The rated active power of the LUCMX6BL is 0.09kW for 400/440Vac at 50/60Hz.

Schneider Electric

LUCM18BL on Powermatic Associates

LUCM18BL

Verified stock: 0

Schneider Electric LUCM18BL is a multifunctional control unit within the Ultra sub-range, designed with a built-in LCD display operating at 24Vdc and featuring an RJ45 connector for RS-485 port connectivity. It accommodates 1-pole (1P), 2-poles (2P), and 3-poles (3P) configurations. The unit offers a comprehensive suite of protection functions including Thermal overload classes 5, 10, 10A, 20, and 30, overload current protection (14.2 x intensity setting), short-circuits protection (14.2 x max. current), missing or unbalanced phases, and insulation fault. It is equipped with a degree of protection rated at IP20 and IP40, contains 0 Normally Open (NO) auxiliary contacts, and 0 Normally Closed (NC) auxiliary contacts. The rated active power of the LUCM18BL is specified as 7.5kW for 400/440Vac at 50/60Hz, 9kW for 500Vac at 50/60Hz, and 15kW for 600Vac at 50/60Hz.

Schneider Electric

LUCM1XBL on Powermatic Associates

LUCM1XBL

Verified stock: 0

Schneider Electric LUCM1XBL is a multifunctional control unit within the Ultra sub-range, designed with a built-in LCD display operating at 24Vdc and featuring an RJ45 connector for RS-485 port connectivity. It supports 1-pole (1P), 2-poles (2P), and 3-poles (3P) configurations. The unit offers a comprehensive suite of protection functions including Thermal overload classes 5, 10, 10A, 20, and 30, overload current protection (14.2 x intensity setting), short-circuits protection (14.2 x max. current), missing or unbalanced phases, and insulation fault. It is equipped with a degree of protection rated at IP20 and IP40, contains 0 Normally Open (NO) auxiliary contacts, and 0 Normally Closed (NC) auxiliary contacts. The rated active power of the LUCM1XBL is 0.25kW for 400/440Vac at 50/60Hz.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric LUCM12BL is a multifunctional control unit within the Ultra sub-range, designed with a built-in LCD display operating at 24Vdc and equipped with an RJ45 connector for RS-485 port connectivity. It supports 1-pole (1P), 2-poles (2P), and 3-poles (3P) configurations. The unit offers a comprehensive suite of protection functions including Thermal overload classes 5, 10, 10A, 20, and 30, overload current protection (14.2 x intensity setting), short-circuits protection (14.2 x max. current), missing or unbalanced phases, and insulation fault. It is designed with a degree of protection rated at IP20 and IP40, contains 0 Normally Open (NO) auxiliary contacts, and 0 Normally Closed (NC) auxiliary contacts. The rated active power of the LUCM12BL is 5.5kW for 400/440Vac and 500Vac at 50/60Hz, and 9kW for 600Vac at 50/60Hz.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock