2065-100/998-403 WAGO Industrial Automation Components

WAGO 2065-100/998-403 is a terminal block without insulation housing, necessitating protection against accidental contact at voltages higher than low voltages for the relevant application. It adheres to the insulation coordination standard EN/IEC 60664-1 and applicable end product standards, with a rated voltage of 320V (III/2), rated impulse voltage of 4kV (III/2), nominal voltage of 630V (II/2), and rated surge voltage of 4kV (II/2) per IEC/EN 60664-1. The rated current is 9A. For UL 1977, it has a rated voltage of 600V and a rated current of 9A. It features a single connection point, one potential, and one connection type across one level, utilizing Push-in CAGE CLAMP technology with push-button actuation. It accommodates solid and fine-stranded conductors ranging from 0.2 to 0.75mm2 (24 to 18 AWG) with a strip length of 7.5 to 9.5mm (0.3 to 0.37 inches) and a conductor connection direction to PCB of 0°. The terminal block has a pin spacing of 6.5mm (0.256 inches), a width of 2.9mm (0.114 inches), a height of 2.7mm (0.106 inches), and a depth of 8mm (0.315 inches). It is designed for SMD PCB contact with an in-line solder pin arrangement and one solder pin per potential. The clamping spring is made of chrome-nickel spring steel (CrNi), and the contact material is a copper alloy with tin plating. It weighs 0.3g and operates within a temperature range of -60 to +120°C. The product is RoHS compliant, packaged in boxes, with a country of origin of CH and a GTIN of 4055143665469.