750-564 WAGO Industrial Automation Components

WAGO 750-564 is an automation part featuring four analog outputs and a total of four channels per module, supporting both voltage and current signal types. It accommodates a wide range of signal types for current (0...10mA to -22...+22mA) and voltage (0...5V to -12...+12V), with actuator connections for 4 x (2-wire) setups, and voltage outputs can be connected in 4-wire technology via sense lines. The part boasts a 16-bit resolution, with a data width of 4 x 16-bit data and 4 x 8-bit control/status. It has a load impedance of ≥ 1kΩ for voltage output and ≤ 600Ω for current output, with a typical conversion time of 3ms. The output error at a reference temperature of 25°C has a maximum deviation of 0.05% of the upper-range value, and it features temperature coefficients of U +/-25 ppm/K and I +/-50 ppm/K for voltage and current, respectively. Configuration options include WAGO-I/O-CHECK, CODESYS Library, and e!COCKPIT, with a system supply voltage of 5 VDC via data contacts and a field supply voltage of 24 VDC (-25...+30%). It offers 500V system/field isolation, LED indicators for status and error, and supports 16 x Push-in CAGE CLAMP connection technology. The part is designed for DIN-35 rail mounting, housed in polycarbonate and polyamide 6.6, and has an IP20 protection type. It operates within an ambient temperature range of 0...+55°C and can be stored between -25...+85°C. The 750-564 complies with CE marking, RoHS, and has a customs tariff number of 85389099990.