TSM820CSFLP ABB Control Industrial Automation Components

MDI1PRL23B7-EQ-N

Novanta IMS

Novanta IMS MDI1PRL23B7-EQ-N is a stepper motor that features an integrated driver and operates as a 2-phase DC stepper motor. It is designed with an external single-end 512-line optical encoder, a rear control knob, and a double motor stack in its Plus version, which includes standard features. The connection is facilitated through a non-locking spring-clamp connector and a 10-pin friction-lock wire crimp connector. It supports RS-422 and RS-485 communication protocols. The motor operates on a supply voltage range of 12Vdc to 75Vdc, with recommended voltages at 24Vdc, 48Vdc, and 72Vdc. It is mounted via a 57x57mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The stepper motor is rated with a degree of protection IP20, has a moment of inertia of 0.26kg.cm^2, a stall torque of 102N.cm, and offers a resolution of 1.8° step angle.

PT-30HG-13-LU2-H1131/S1800

Turck

PT-30HG-13-LU2-H1131/S1800 Turck - PT-30HG-13-LU2-H1131/S1800 With Voltage Output (3-Wire)

RKM 44P-10M

Turck

RKM 44P-10M Turck - RKM 44P-10M Power Cordset, Connection Cordset

NI4-DSU35TC-2Y1X2

Turck

NI4-DSU35TC-2Y1X2 Turck - NI4-DSU35TC-2Y1X2 Inductive Sensor, For Rotary Actuators

RKC 4.5T-3-RSM 50/S90/S3570

Turck

RKC 4.5T-3-RSM 50/S90/S3570 Turck - RKC 4.5T-3-RSM 50/S90/S3570 Actuator and Sensor Cordset, Extension Cordset

RSM RKM 44P-10M/S4000

Turck

S15CM-PF-IQ

Banner

S15C Series: In-Line Converter; Voltage: 12-30 V dc; IP67; Female: PFM Output ; Male: Analog 4-20 mA Input; Male-Female 4-pin M12 QD

HOM2175SB

Schneider Electric

Square D by Schneider Electric HOM2175SB is a load center designed for use with a secondary surge arrestor. It has a rated current of 5A and operates at a rated voltage of 120Vac/240Vac. This load center is protected by a NEMA 1 enclosure and is suitable for single-phase (1PH) electrical networks.

MDI1PRL23B7-EQ-N

Novanta IMS

Novanta IMS MDI1PRL23B7-EQ-N is a stepper motor that features an integrated driver and operates as a 2-phase DC stepper motor. It is designed with an external single-end 512-line optical encoder, a rear control knob, and a double motor stack in its Plus version, which includes standard features. The connection is facilitated through a non-locking spring-clamp connector and a 10-pin friction-lock wire crimp connector. It supports RS-422 and RS-485 communication protocols. The motor operates on a supply voltage range of 12Vdc to 75Vdc, with recommended voltages at 24Vdc, 48Vdc, and 72Vdc. It is mounted via a 57x57mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The stepper motor is rated with a degree of protection IP20, has a moment of inertia of 0.26kg.cm^2, a stall torque of 102N.cm, and offers a resolution of 1.8° step angle.

PT-30HG-13-LU2-H1131/S1800

Turck

PT-30HG-13-LU2-H1131/S1800 Turck - PT-30HG-13-LU2-H1131/S1800 With Voltage Output (3-Wire)

RKM 44P-10M

Turck

RKM 44P-10M Turck - RKM 44P-10M Power Cordset, Connection Cordset

NI4-DSU35TC-2Y1X2

Turck

NI4-DSU35TC-2Y1X2 Turck - NI4-DSU35TC-2Y1X2 Inductive Sensor, For Rotary Actuators