Powermatic Associates Logo

M18-4NAEJ-Q8 Banner Proximity Sensors

M18-4NAEJ-Q8 on Powermatic Associates
Banner

Part#:M18-4NAEJ-Q8

Alt. Part#:95605

Manufacturer:Banner

Category:Proximity Sensors

Product Lifecycle:Active

Product description

M18-4 Series: Stainless: Emitter with Beam Inhibit Input; Range: 25 m; Input: 10-30 V dc; Outputs: none; Input: Beam Inhibit; 4-pin M12 Integral QD

Product Details

  • Weight
    36.28736 g
  • Country Of Origin
    CN
  • Outputs
    N/A
  • Special Feature: Water Detection
    No
  • Adjustments
    N/A
  • Feature: Timing (Hold/Delay)
    No
  • Primary Housing Material
    Stainless Steel
  • Operation
    N/A
  • NEMA Rating
    N/A
  • Feature: Hazardous Area
    No
  • Sensing Mode (General)
    Opposed
  • Max Op. Temp. (°C)
    70
  • IP Rating
    IP67, IP69
  • Feature: Washdown Rated
    Yes
  • Max Sensing Distance (mm)
    25000
  • Special Feature: Intrinsically Safe
    No
  • Number of Pins
    4
  • Feature: Encapsulated
    No
  • Sensing Mode (Detailed)
    Emitter
  • Output response time (ms)
    1.5
  • Max Op. Relative Humidity [%]
    95% @ 50°C
  • DeviceNet
    No
  • Power
    DC
  • Special Feature: Remote Teach
    No
  • Lens Material
    Acrylic
  • Feature: Audible
    No
  • Power Supply/Supply Voltage
    10-30 V dc
  • Connection
    Integral QD
  • Sensing Beam Wavelength
    645
  • Indicator
    LEDs
  • IO Link
    No
  • Housing Style
    Barrel
  • Quick Disconnect Type
    M12 (Euro)
  • Repeatability (µs)
    170
  • Opposed Mode Emitter/Receiver
    Emitter
  • Sensing Beam
    Visible Red LED
  • Min Op. Temp. (°C)
    -40
  • Delay at Power-up (ms)
    100
  • Feature: Ecolab Certified
    Yes
  • Barrel Diameter (mm)
    18
  • Feature: Chemical Resistant
    Yes

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.
The price of M18-4NAEJ-Q8 on Powermatic Associates is $80.00. Order now.

About the product

Banner Engineering M18-4NAEJ-Q8 is a photo-electric sensor from the M18-3 (stainless steel) series, designed as an emitter in a through-beam system with an opposed mode beam inhibit input. It features a visible red light with a wavelength of 645 nm and is housed in a durable stainless steel with an acrylic lens. This sensor is shaped in an M18 cylindrical threaded/barrel form and comes pre-equipped with a 4-pin Euro-style M12 connector for connectivity. It operates on a supply voltage range of 10Vdc to 30Vdc, with nominal values of 12Vdc and 24Vdc. The M18-4NAEJ-Q8 can function within an ambient air temperature range of -40 to +70 degrees Celsius and offers a sensing distance of up to 25 meters. Its response time is quick, at 1.5ms or 0.0015 seconds. This sensor is also designed to withstand harsh environments with a degree of protection rated at IP67 and IP69K. The thread size for mounting is M18.

M18-4NAEJ-Q8 Related Documents

188320.pdf

Similar products from: Banner Proximity Sensors

Q4XFNCOD310-Q8 on Powermatic Associates

Q4XFNCOD310-Q8

Banner

Q4X Series: Clear Object; Range: 310 mm; Input: 10-30 V dc; Outputs: 1 NPN; 5-pin M12 Integral QD; Flush Mount Housing

4 in stock
QS18VN6R-10170 on Powermatic Associates

QS18VN6R-10170

Banner

WORLD-BEAM QS18 Series: Receiver; Range: 20 m; Input: 10-30 V dc; Output: Complementary Solid-State NPN; 300 mm (12 in) 4-pin Molex connector

69 in stock
VS8EAPRQ on Powermatic Associates

VS8EAPRQ

Banner

VS8 Series: Laser Receiver; Range: 3 m; Input: 10-30 V dc; Output: PNP; 200 mm 4-pin M8 Pigtail QD

7 in stock
SB12TE1 on Powermatic Associates

SB12TE1

Banner

SB12 Threaded Series Emitter; Range: 1.5 m; Input Voltage: 10-30 V dc; Output: Not Applicable; 2 m (6.5 ft) cable

26 in stock
SM31RL100QDP on Powermatic Associates

SM31RL100QDP

Banner

SM31RL100QD MINIBEAM SCANNER W/.100 APERTURE INSTALLED, 150 mm (6 in) 4-pin M12 Pigtail QD

10 in stock
T18-2VPLP-2M on Powermatic Associates

T18-2VPLP-2M

Banner

T18-2 Series: Polarized Retroreflective; Range: 6 m; Input: 10-30 V dc; Outputs: complementary PNP; 2 m 4-conductor PVC Cable

5 in stock

Manufacturer warranty

M18-4NAEJ-Q8 Banner

$80.00

Your price can be lower.
Log in or Create account to check your discount

Select Qty:

$80.00

$80.00 each

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare M18-4NAEJ-Q8 with other Proximity Sensors products

Weight

Country Of Origin

Outputs

Special Feature: Water De...

Adjustments

Feature: Timing (Hold/Del...

Primary Housing Material

Operation

NEMA Rating

Feature: Hazardous Area

Selected product

M18-4NAEJ-Q8
Backordered
M18-4NAEJ-Q8
Banner

M18-4 Series: Stainless: Emitter with Beam Inhibit Input; Range: 25 m; Input: 10-30 V dc; Outputs: n...

Weight36.28736 g

Country Of OriginCN

OutputsN/A

Special Feature: Water DetectionNo

AdjustmentsN/A

Feature: Timing (Hold/Delay)No

Primary Housing MaterialStainless Steel

OperationN/A

NEMA RatingN/A

Feature: Hazardous AreaNo

SB12TE1
26 in stock
SB12TE1
Banner

SB12 Threaded Series Emitter; Range: 1.5 m; Input Voltage: 10-30 V dc; Output: Not Applicable; 2 m (...

Weight45.3592 g

Country Of OriginCN

OutputsN/A

Special Feature: Water Detection-

Adjustments-

Feature: Timing (Hold/Delay)-

Primary Housing MaterialThermoplastic

Operation-

NEMA Rating-

Feature: Hazardous Area-

VS8EAPRQ
7 in stock
VS8EAPRQ
Banner

VS8 Series: Laser Receiver; Range: 3 m; Input: 10-30 V dc; Output: PNP; 200 mm 4-pin M8 Pigtail QD

Weight10.3418976 g

Country Of OriginDE

OutputsPNP

Special Feature: Water Detection-

Adjustments-

Feature: Timing (Hold/Delay)-

Primary Housing MaterialPUR

Operation-

NEMA Rating-

Feature: Hazardous Area-

About the manufacturer

Banner

Powermatic Associates is an authorized Banner distributor, proud to offer an extensive range of Banner's innovative products and solutions. Banner Engineering is a renowned manufacturer specializing in industrial automation, known for their cutting-edge sensor technology, machine safety solutions, wireless connectivity, and LED lighting systems. With a precision focus on delivering high-quality eq...

Recently viewed products

ATV340D11N4E on Powermatic Associates

ATV340D11N4E

Schneider Electric

Schneider Electric ATV340D11N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless voltage vector control, current vector control with sensor, and Master/Slave daisy chain through PTO/PTI for MachineStruxure integration in SoMachine. It operates in velocity mode and torque control, offering 220% Tn in open or closed loop control, dynamic motor control performance (up to 400Hz speed bandwidth), and cyclic application task (1ms) with an energy-saving mode. The design includes a built-in EMC filter (class C3) and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm and an IP20 degree of protection. The rated current is 32A (normal-duty; 4kHz), 24A (heavy-duty; 4kHz), with a maximum current of 43A (normal-duty; for 2s), 43A (heavy-duty; for 2s), and 35.2A (normal-duty; for 60s), 36A (heavy-duty; for 60s). It supports cabinet mounting, Ethernet/IP, Modbus TCP communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 x analog output, 5 x digital inputs, 2 x digital outputs programmable as inputs or outputs, 1 x digital output (C/O SPDT relay contact), 1 x digital output (NO relay contact), and 2 x analog inputs. The current consumption is 34A (380Vac; normal-duty), 27.3A (480Vac; normal-duty), 34.7A (380Vac; heavy-duty), 27.7A (480Vac; heavy-duty), with a rated active power of 15kW (normal-duty), 11kW (heavy-duty), and rated power of 20HP (normal-duty), 15HP (heavy-duty).

0 in stock

Relevant products

FAQ

What is the price of M18-4NAEJ-Q8?
Purchase the M18-4NAEJ-Q8 from Powermatic Associates at the price of $80.00. Order today.

Out if stock but available for backorder.

M18-4 Series: Stainless: Emitter with Beam Inhibit Input; Range: 25 m; Input: 10-30 V dc; Outputs: none; Input: Beam Inhibit; 4-pin M12 Integral QD

Similar products from: Proximity Sensors

What can I help you find today?

Recommended parts

ZB4BS84430 on Powermatic Associates

ZB4BS84430

Schneider Electric

Schneider Electric ZB4BS84430 is a push-button designed for emergency switching OFF (ESO) or shutdown (ESD) functions within the XB4 sub-range. It features a chromium-plated bezel made of metal, ensuring durability and a sleek appearance. The button is round in shape, with a mushroom head diameter of 22 mm and a base diameter of 40 mm. It offers a high degree of protection with ratings of IP66, IP69, IP69K, NEMA 4X, and NEMA 13, suitable for demanding environments. The mechanical durability of this component is rated at 300,000 operations at no load, indicating its longevity. Dimensions include a net height of 40 mm, depth of 57 mm, and width of 40 mm. It is equipped with 1 NC (Normally Closed) auxiliary contact for connectivity. The operating mode of the ZB4BS84430 allows for both turn-to-release and stay-put (maintained/latched) actions, providing flexibility in emergency situations.

1 in stock