1574636 Festo Servo Motors

Product Details

• Rotor position sensor measuring principle
  Inductive
• Brake power consumption
  15.6 W
• Phase-phase winding resistance
  1.6 Ohm
• Voltage constant, phase-to-phase
  88.71 mVmin
• Ambient temperature
  -10 °C ... 40 °C
• Peak torque
  27 Nm
• Product weight
  10400 g
• Featherkey shaft design
  DIN 6885 A 8 x 7 x 40
• Number of pole pairs
  6
• Temperature monitoring
  PTC resistor
• Insulation protection class
  F
• Rotor position sensor resolution
  18 bit
• Type of winding switch
  Star inside
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU low voltage directive
• Total output inertia moment
  9.271 kgcm²
• Nominal torque
  7.7 Nm
• Permissible axial shaft load
  200 N
• Switching cycles, holding brake
  5 million idle actuations (without friction work!)
• Type code
  EMMS-AS
• Brake DC operating voltage
  24 V
Motor nominal power
3140 W
Rating class according to EN 60034-1
S1
Degree of protection
IP54
Brake mass moment of inertia
1.2 kgcm²
MTTFd, subcomponent
152 years, rotor position sensor
Electrical connection technology
Plug
Rotor position sensor interface
EnDat® 22
Max. rotational speed
4510 1/min
Motor constants
1.47 Nm/A
DC nominal voltage
565 V
Peak current
24.4 A
Storage temperature
-20 °C ... 60 °C
Relative air humidity
0 - 90 %
Stall torque
11.08 Nm
Permissible radial shaft load
780 N
Note on materials
RoHS-compliant
Rotor position sensor
Absolute encoder, single-turn
Nominal rotary speed
3900 1/min
Motor nominal current
5.23 A
Winding inductance phase-phase
9.01 mH
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Certification
RCM compliance mark c UL us - Recognized (OL)
Brake holding torque
18 Nm
MTTF, subcomponent
76 years, rotor position sensor 4469 years, holding brake
Conforms to standard
IEC 60034

1574636 Related Documents