1584931 Festo Servo Motors

Product Details

• Brake power consumption
  17 W
• Motor nominal current
  14.43 A
• Phase-phase winding resistance
  0.283 Ohm
• Corrosion resistance class (CRC)
  2 - Moderate corrosion stress
• Nominal torque
  17.47 Nm
• Permissible axial shaft load
  250 N
• MTTFd, subcomponent
  152 years, rotor position sensor
• Electrical connection technology
  Plug
• Rotor position sensor
  Absolute encoder, multi-turn
• Motor constants
  1.211 Nm/A
• Insulation protection class
  F
• Winding inductance phase-phase
  3.07 mH
• Voltage constant, phase-to-phase
  75.4 mVmin
• Relative air humidity
  0 - 90 %
• Brake mass moment of inertia
  3.8 kgcm²
• Stall torque
  26.2 Nm
• MTTF, subcomponent
  76 years, rotor position sensor 4469 years, holding brake
• Note on materials
  RoHS-compliant
• Type code
  EMMS-AS
• Temperature monitoring
  PTC resistor
Nominal rotary speed
3000 1/min
DC nominal voltage
565 V
Rotor position sensor resolution
19 bit
Ambient temperature
-10 °C ... 40 °C
Total output inertia moment
55.7 kgcm²
Peak torque
80 Nm
Switching cycles, holding brake
5 million idle actuations (without friction work!)
Conforms to standard
IEC 60034
Number of pole pairs
6
Rotor position sensor measuring principle
Inductive
Max. rotational speed
5300 1/min
Nominal operating voltage DC
565 V
Type of winding switch
Star inside
CE marking (see declaration of conformity)
As per EU EMC directive As per EU low voltage directive
Degree of protection
IP65
Brake holding torque
30 Nm
Rotor position sensor interface
EnDat® 22
Brake DC operating voltage
24 V
Motor nominal power
5490 W
Peak current
77.2 A
Rating class according to EN 60034-1
S1
Storage temperature
-20 °C ... 60 °C
Certification
RCM compliance mark c UL us - Recognized (OL)
Permissible radial shaft load
940 N
Product weight
21960 g
Featherkey shaft design
DIN 6885 A 10 x 8 x 40

1584931 Related Documents