178467 Festo Actuator Accessories

Name: 178467
Brand: Festo

Part#:178467

Alt. Part#:KPE-16

Manufacturer:Festo

Category:Actuator Accessories

Product Lifecycle:Active

Product description

clamping unit KPE-16 Assembly position: Any, Type of clamping with direction of action: (* at both ends, * Clamping with spring, release with compressed air), Design structure: Tilting disks, Variants: Single-ended piston rod, Operating pressure MPa: <:

Product Details

Type code
KPE
Clamping type with active direction
Both sides Clamped by spring, released by compressed air
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Product weight
410 g
Operating pressure
≤ 10 bar
Design
Hinge-down panes
Information on operating and pilot media
Operation with oil lubrication possible (required for further use)
Material of spring
Spring steel
Clamping jaws material
Brass
Mounting position
Any
Ambient temperature
-10 °C ... 80 °C
Round material to be clamped
16 mm
Seals material
NBR TPE-U(PU)
Housing material
Aluminum Anodized
Release pressure
≥ 3 bar
Variants
Piston rod at one end
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Static holding force
1000 N
Material of piston
POM

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

178467 Related Documents

178467 DataSheet.pdf

Similar products from: Festo Actuator Accessories

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock

6140

Festo

self-aligning rod coupler FK-M10X1,25 Compensates for angular and radial misalignment, for fitting on piston rod side. Size: M10x1,25, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Ambient temperature: -40 - 150 °C, Product weigh

2 in stock

537806

Festo

mounting SMBZ-8-32/100 For attaching proximity switches with type 8 slot to cylinders with tie rod. Size: 8, Design: For tie rod, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Materials note: (* Free of copper and PTFE, * Conform

1 in stock

3111

Festo

rod clevis SG-M8 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M8, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M8, Corrosion resistance classification CRC: 1 - Low

2 in stock

151993

Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly position: Any, Mode of operation: single-acting, Operating pressure: <: 6 bar

24 in stock

6146

Festo

rod clevis SG-M16X1,5 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M16x1,5, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M16x1.5, Corrosion resistance classificati

1 in stock

Manufacturer warranty

178467 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 178467 with other Actuator Accessories products

Type code

Clamping type with active...

Corrosion resistance clas...

Product weight

Operating pressure

Design

Information on operating ...

Material of spring

Clamping jaws material

Mounting position

Selected product

Backordered

178467

Festo

clamping unit KPE-16 Assembly position: Any, Type of clamping with direction of action: (* at both e...

Type codeKPE

Clamping type with active directionBoth sides Clamped by spring...

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Product weight410 g

Operating pressure≤ 10 bar

DesignHinge-down panes

Information on operating and pilot mediaOperation with oil lubricati...

Material of springSpring steel

Clamping jaws materialBrass

Mounting positionAny

1 in stock

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly ...

Type codeYSR-C

Clamping type with active direction-

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Product weight-

Operating pressure-

Design-

Information on operating and pilot media-

Material of spring-

Clamping jaws material-

Mounting positionAny

24 in stock

151993

Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly posit...

Type codeEV

Clamping type with active direction-

Corrosion resistance class (CRC)-

Product weight-

Operating pressure≤ 6 bar

Design-

Information on operating and pilot media-

Material of spring-

Clamping jaws material-

Mounting positionAny

About the manufacturer

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Accessories for actuators are supplementary parts engineered to improve the efficiency and operation of actuator systems. These may encompass pneumatic cylinders, rotary actuators, rodless actuators, tie rod cylinders, and combination actuators, to name a few.

Recently viewed products

MDI1PRL17B4-EQ

Novanta IMS

Novanta IMS MDI1PRL17B4-EQ is a stepper motor designed with an integrated driver and operates as a 2-phase DC stepper motor. It features an external single-end 512-line optical encoder and is constructed with a double motor stack in the Plus version, which includes standard features. The connection is facilitated through a non-locking spring-clamp connector and a 10-pin friction-lock wire crimp connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a supply voltage range of 12Vdc to 48Vdc, with an optimal performance at 24Vdc. It is designed for mounting with a 42x42mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDI1PRL17B4-EQ offers a degree of protection rated at IP20, has a moment of inertia of 0.057kg.cm^2, and provides a stall torque of 42N.cm. Its resolution is defined by a 1.8° step angle.

0 in stock

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

HOM2175SB

Schneider Electric

Square D by Schneider Electric HOM2175SB is a load center designed for use with a secondary surge arrestor. It has a rated current of 5A and operates at a rated voltage of 120Vac/240Vac. This load center is protected by a NEMA 1 enclosure and is suitable for single-phase (1PH) electrical networks.

0 in stock

RKC 4.5T-3-RSM 50/S90/S3570

Turck

RKC 4.5T-3-RSM 50/S90/S3570 Turck - RKC 4.5T-3-RSM 50/S90/S3570 Actuator and Sensor Cordset, Extension Cordset

0 in stock

M32-1

Mencom

M32 Male Thread, To, 1.0-NPT Female Thread, Adapter

0 in stock

RSM WKM 126-6M

Turck

RSM WKM 126-6M Turck - RSM WKM 126-6M Actuator and Sensor Cordset, Extension Cordset

0 in stock

MDI1PRL17B4-EQ

Novanta IMS

0 in stock

M-2218-3.0ES500

Novanta IMS

0 in stock

MDI1PRL17B4-EQ

Novanta IMS

0 in stock

M-2218-3.0ES500

Novanta IMS

0 in stock

Relevant products

178465

Verified stock: 0

clamping unit KPE-10 Assembly position: Any, Type of clamping with direction of action: (* at both ends, * Clamping with spring, release with compressed air), Design structure: Tilting disks, Variants: Single-ended piston rod, Operating pressure MPa: <:

Festo

178458

Verified stock: 0

Clamping cartridge KP-20-1400 Assembly position: Any, Type of clamping with direction of action: (* at both ends, * Clamping with spring, release with compressed air), Design structure: Tilting disks, Variants: Single-ended piston rod, Operating pressure

Festo

178415

Verified stock: 0

plastic tubing PUN-16X2,5-RT Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 16 mm, Bending radius relevant for flow rate: 88 mm, Inside diameter: 11 mm, Min. bend

Festo

178423

Verified stock: 0

plastic tubing PUN-3X0,5-GN Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 3 mm, Bending radius relevant for flow rate: 12 mm, Inside diameter: 2,1 mm, Min. bendi

Festo

178425

Verified stock: 0

plastic tubing PUN-6X1-GN Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

Festo

FAQ

Out if stock but available for backorder.

Recommended parts

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock

NLGF36400CU31X

Schneider Electric

PowerPact L-Frame Circuit Breaker

1 in stock

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock

533345

Festo

solenoid valve VMPA1-M1H-G-PI For valve terminal MPA-S. Valve function: 5/3 closed, Type of actuation: electrical, Valve size: 10 mm, Standard nominal flow rate: 320 l/min, Operating pressure: -0,9 - 10 bar

1 in stock

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

Turck

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579 Turck - YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

1 in stock

PAXT0010

Red Lion

1 in stock

178467 Festo Actuator Accessories

Part#:178467

Alt. Part#:KPE-16

Manufacturer:Festo

Category:Actuator Accessories

Product description

Product Details

Product condition

178467 Related Documents

Similar products from: Festo Actuator Accessories

34571

Festo

6140

Festo

537806

Festo

3111

Festo

151993

Festo

6146

Festo

178467 Festo

Compare 178467 with other Actuator Accessories products

178467

Festo

34571

Festo

151993

Festo

About the manufacturer

About the Product Category

Recently viewed products

HOM2175SB

Schneider Electric

RKC 4.5T-3-RSM 50/S90/S3570

Turck

M32-1

Mencom

RSM WKM 126-6M

Turck

Relevant products

178465

178458

178415

178423

178425

FAQ

In-stock availability

In-stock availability

Product Details

Product Details

Similar products from: Actuator Accessories

34571

6140

537806

3111

Recommended parts

PAXT0010

Red Lion

NLGF36400CU31X

Schneider Electric

34571

Festo

533345

Festo

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

Turck