5242207 Festo Servo Motors

Product Details

• Electrical connection 1, connection technology
  M23x1
• Concentricity, coaxiality, axial runout according to DIN SPEC 42955
  N
• Information on max. installation height
  with 1,000 m and longer only with derating of -1.0% per 100 m
• Motor type as per EN 60034-7
  IM B5 IM V3
• Electrical connection 1, connection type
  Hybrid plug
• Note on degree of protection
  IP40 for motor shaft without rotary shaft seal IP67 for motor housing, incl. connection technology
• Certificate issuing authority
  UL E342973
• Rotor position encoder for DC operating voltage
  5 V
• Brake coil resistance
  52.4 Ohm
• Max. brake friction work
  5600 J
• Brake separation time
  ≤ 35 ms
• Thermal resistance
  1.3 K/W
• Type code
  EMMT-AS
• Continuous stall current
  2.5 A
• Motor nominal power
  310 W
• Motor nominal current
  2.2 A
• Rating class according to EN 60034-1
  S1
• Thermal class according to EN 60034-1
  F
• Interface code, motor out
  60P
• Detent torque
  < 1.0% of peak torque
Shock resistance
Shock test with severity level 2 as per FN 942017-5 and EN 60068-2-27
Measuring flange
250 x 250 x 15 mm, steel
Cross inductivity Lq (phase)
8.2 mH
Standstill torque constant
0.53 Nm/A
Rotor position sensor interface
EnDat® 22
Nominal rotary speed
3000 1/min
Motor constants
0.45 Nm/A
Type of winding switch
Star inside
Storage temperature
-20 °C ... 70 °C
Total output inertia moment
0.373 kgcm²
Stall torque
1.15 Nm
MTTF, subcomponent
190 years, rotor position sensor
Switching cycles, holding brake
10 million idle actuations (without friction work!)
Rotor position sensor for manufacturer designation
EQI 1131
Vibration resistance
Transport application test with severity level 2 as per FN 942017-4 and EN 60068-2-6
Balancing quality
G 2.5
Max. brake no-load speed
10000 1/min
Brake coil inductivity
700 mH
Max. mechanical speed
16000 1/min
Brake closing time
10 ms
DC brake response delay
≤ 2 ms
Rotor position encoder for absolutely detectable revolutions
4096
Rotor position encoder for positional values per revolution
524288
Max. rotational speed
6800 1/min
Brake power consumption
11 W
Brake DC operating voltage
24 V
Phase-phase winding resistance
4.85 Ohm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Brake mass moment of inertia
0.074 kgcm²
Nominal torque
1 Nm
MTTFd, subcomponent
380 years, rotor position sensor
Conforms to standard
IEC 60034
Electrical connection for input 1, connection pattern
00995913
Mounting position
Any
Contamination level
2
Note on ambient temperature
Up to 80 °C with derating of -1.5% per degree Celsius
Electrical connection 1, number of pins/wires
15
Max. installation height
4000 m
Brake stopping current
0.33 A
Storage lifetime, under nominal conditions
20000 h
Winding longitudinal inductivity Ld (phase)
7 mH
Rotor position encoder system accuracy angle measurement
-120 arcsec ... 120 arcsec
Rotor position sensor
Absolute encoder, multi-turn
Temperature monitoring
Digital motor temperature transmission via EnDat® 2.2
Rotor position sensor resolution
19 bit
Peak current
11 A
Corrosion resistance class (CRC)
0 - No corrosion stress
Certification
RCM compliance mark c UL us - Recognized (OL)
Peak torque
3.4 Nm
Permissible radial shaft load
350 N
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Max. winding temperature
155 °C
Brake airflow
0.33 A
Brake current consumption
0.46 A
Number of pole pairs
5
Electric time constant
2.7 ms
Rotor position encoder for DC operating voltage range
3.6 V ... 14 V
Thermal time constant
42 min
Rotor position sensor measuring principle
Inductive
Nominal operating voltage DC
325 V
Winding inductance phase-phase
11 mH
Voltage constant, phase-to-phase
32 mVmin
Relative air humidity
0 - 90 %
Ambient temperature
-15 °C ... 40 °C
Brake holding torque
2.5 Nm
Permissible axial shaft load
70 N
Product weight
1850 g

5242207 Related Documents