533417 Festo Quarter Turn Actuators

Product Details

• Size of valve actuator
  0015
• Depth shaft connection
  13.2 mm
• Type code
  DAPS
• Safety integrity level (SIL)
  Up to SIL 2 high demand mode Up to SIL 2 low demand mode
• Type of ignition protection for gas
  Ex h IIC T6...T3 Gb X
• Flange hole pattern
  F03
• Mounting position
  Any
• Valve connection conforms to standard
  VDI/VDE 3845 (NAMUR)
• Operating pressure
  1 bar ... 8.4 bar
• Explosive ambient temperature
  -20°C <= Ta <= +60°C
• CE marking (see declaration of conformity)
  as per EU explosion protection directive (ATEX)
• Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
  0.56 l
• Standard connection for valve
  ISO 5211
• Position sensing
  None
• Closing direction
  Clockwise closing
• ATEX category gas
  II 2G
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
• Torque at nominal operating pressure and 50° swivel angle
  7.5 Nm
• Pneumatic connection
  G1/8
Cover material
Wrought aluminum alloy
End-position adjusting range at 0°
-1 deg ... 9 deg
Cushioning
No cushioning
Design
Scotch yoke system
Symbol
00991265
Nominal operating pressure
5.6 bar
Ambient temperature
-20 °C ... 80 °C
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Torque at nominal operating pressure and 0° swivel angle
15 Nm
Shaft connection
T11
Seals material
FPM PUR
Swivel angle
90 deg
Mode of operation
Double-acting
ATEX category for dust
II 2D
Torque at nominal operating pressure and 90° swivel angle
11.3 Nm
Product weight
750 g
Material number for shaft
1.4305
Type of (ignition) protection for dust
Ex h IIIC T85°C...T200°C Db X
Corrosion resistance class (CRC)
3 - High corrosion stress
Note about the torque
The actuator's operating torque must not be higher than the maximum permissible torque listed in ISO 5211, based on the size of the mounting flange and the coupling.
Note on materials
RoHS-compliant
Material of screws
High-alloy steel
Housing material
Wrought aluminum alloy
Shaft material
High-alloy steel

533417 Related Documents