Powermatic Associates Logo

551462 Festo Pneumatic Tubing

551462 on Powermatic Associates
Festo

Part#:551462

Alt. Part#:PEN-4X0,75-SI

Manufacturer:Festo

Category:Pneumatic Tubing

Product Lifecycle:Active

Product description

plastic tubing PEN-4X0,75-SI standard O.D tubing, for QS plug connectors, CN and CK fittings, polyethylene (not approved for use in the food industry). Outside diameter: 4 mm, Bending radius relevant for flow rate: 20 mm, Inside diameter: 2,7 mm, Min. ben

Product Details

  • Type code
    PEN
  • Tubing characteristics
    Suitable for energy chains in applications with high cycle rates
  • Min. bending radius
    10 mm
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com
  • Shore hardness
    D 52 +/-3
  • Bending radius relevant for flow rate
    20 mm
  • Temperature-dependent operating pressure
    -0.95 bar ... 10 bar
  • Product weight by length
    0.00643 kg/m
  • Note on materials
    Free of copper and PTFE RoHS-compliant
  • Outside diameter
    4 mm
  • Ambient temperature
    -30 °C ... 60 °C
  • Pneumatic connection
    For plug connection outside diameter 4 mm For barbed fitting, inside diameter 3 mm
  • Material of pneumatic tubing
    PE
  • Pneumatic tubing test conditions
    Suitability for energy chains: >5 million cycles as per FN 942021
  • Inside diameter
    2.7 mm
  • Certification
    German Technical Control Board (TÜV)
  • Color
    Silver

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

551462 Related Documents

551462 DataSheet.pdf

Similar products from: Festo Pneumatic Tubing

567965 on Powermatic Associates

567965

Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 5/16, Bending radius relevant for flow rate: 0,121 Fuß, Min. bending radius: 0,065 Fuß, Tubing characteristics: Suitable for energy chai

3540 in stock
567951 on Powermatic Associates

567951

Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 1/2, Bending radius relevant for flow rate: 0,204 Fuß, Min. bending radius: 0,075 Fuß, Tubing characteristics: Suitable for energy chains

1560 in stock
159665 on Powermatic Associates

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

150 in stock
159668 on Powermatic Associates

159668

Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 10 mm, Bending radius relevant for flow rate: 54 mm, Inside diameter: 7 mm, Min. bendi

1650 in stock
553938 on Powermatic Associates

553938

Festo

plastic tubing PUN-6X1-SW-500 Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. ben

500 in stock
197383 on Powermatic Associates

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for energy

50 in stock

Manufacturer warranty

551462 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 551462 with other Pneumatic Tubing products

Type code

Tubing characteristics

Min. bending radius

Operating medium

Shore hardness

Bending radius relevant f...

Temperature-dependent ope...

Product weight by length

Note on materials

Outside diameter

Selected product

551462
Backordered
551462
Festo

plastic tubing PEN-4X0,75-SI standard O.D tubing, for QS plug connectors, CN and CK fittings, polyet...

Type codePEN

Tubing characteristicsSuitable for energy chains i...

Min. bending radius10 mm

Operating mediumCompressed air as per ISO 85...

Shore hardnessD 52 +/-3

Bending radius relevant for flow rate20 mm

Temperature-dependent operating pressure-0.95 bar ... 10 bar

Product weight by length0.00643 kg/m

Note on materialsFree of copper and PTFE RoHS...

Outside diameter4 mm

197383
50 in stock
197383
Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside di...

Type codePUN-H

Tubing characteristicsSuitable for energy chains i...

Min. bending radius8 mm

Operating mediumCompressed air as per ISO 85...

Shore hardness-

Bending radius relevant for flow rate16 mm

Temperature-dependent operating pressure-0.95 bar ... 10 bar

Product weight by length0.0085 kg/m

Note on materials-

Outside diameter4 mm

159665
150 in stock
159665
Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittin...

Type codePUN

Tubing characteristicsSuitable for energy chains i...

Min. bending radius16 mm

Operating mediumCompressed air as per ISO 85...

Shore hardness-

Bending radius relevant for flow rate26.5 mm

Temperature-dependent operating pressure-0.95 bar ... 10 bar

Product weight by length0.0192 kg/m

Note on materials-

Outside diameter6 mm

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Pneumatic tubing, an essential component of pneumatic systems, carries compressed air or gas between parts. Constructed from durable and flexible materials such as polyurethane and polyamide, it comes in various types to meet different needs, including resistance to wear, corrosion, and other environmental elements. This tubing is indispensable in industries such as automation, manufacturing, and ...

Pneumatic Tubing

Recently viewed products

MDM1FSD23A7-EP on Powermatic Associates

MDM1FSD23A7-EP

Novanta IMS

Novanta IMS MDM1FSD23A7-EP is a stepper motor that features an integrated driver and a 2-phase DC stepper motor with SPI. It is designed with an external single-end 256-line optical encoder and a single motor stack in the Plus version, which includes a universal input. The connection is facilitated through a 30cm / 12" bare end flying leads IDC connector. This stepper motor operates on a supply voltage range of 12Vdc-75Vdc, including 24Vdc, 48Vdc, and 72Vdc options. It is mounted via a 57x57mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDM1FSD23A7-EP offers a degree of protection rated at IP20, has a moment of inertia of 0.18kg.cm^2, and provides a stall torque of 64N.cm. Its resolution is defined by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

plastic tubing PEN-4X0,75-SI standard O.D tubing, for QS plug connectors, CN and CK fittings, polyethylene (not approved for use in the food industry). Outside diameter: 4 mm, Bending radius relevant for flow rate: 20 mm, Inside diameter: 2,7 mm, Min. ben

Similar products from: Pneumatic Tubing

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock