Powermatic Associates Logo

551473 Festo Pneumatic Tubing

551473 on Powermatic Associates
Festo

Part#:551473

Alt. Part#:PEN-16X2,5-GN

Manufacturer:Festo

Category:Pneumatic Tubing

Product Lifecycle:Active

Product description

plastic tubing PEN-16X2,5-GN standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outside diameter: 16 mm, Bending radius relevant for flow rate: 122 mm, Inside diameter: 10,8 mm, Min. bending radius: 57,5

Product Details

  • Outside diameter
    16 mm
  • Explosion prevention and protection
    Zone 1 (ATEX) Zone 22 (ATEX)
  • Pneumatic connection
    For plug connection outside diameter 16 mm
  • Tubing characteristics
    Suitable for energy chains in applications with high cycle rates
  • Inside diameter
    10.8 mm
  • Operating medium
    Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com
  • Color
    Green
  • Min. bending radius
    57.5 mm
  • Ambient temperature
    -30 °C ... 60 °C
  • Shore hardness
    D 52 +/-3
  • Bending radius relevant for flow rate
    122 mm
  • Temperature-dependent operating pressure
    -0.95 bar ... 10 bar
  • Certification
    German Technical Control Board (TÜV)
  • Note on materials
    Free of copper and PTFE RoHS-compliant
  • Pneumatic tubing test conditions
    Suitability for energy chains: >5 million cycles as per FN 942021
  • Type code
    PEN
  • Product weight by length
    0.1029 kg/m
  • Material of pneumatic tubing
    PE

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

551473 Related Documents

551473 DataSheet.pdf

Similar products from: Festo Pneumatic Tubing

567965 on Powermatic Associates

567965

Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 5/16, Bending radius relevant for flow rate: 0,121 Fuß, Min. bending radius: 0,065 Fuß, Tubing characteristics: Suitable for energy chai

3540 in stock
567951 on Powermatic Associates

567951

Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 1/2, Bending radius relevant for flow rate: 0,204 Fuß, Min. bending radius: 0,075 Fuß, Tubing characteristics: Suitable for energy chains

1560 in stock
159665 on Powermatic Associates

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

150 in stock
159668 on Powermatic Associates

159668

Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 10 mm, Bending radius relevant for flow rate: 54 mm, Inside diameter: 7 mm, Min. bendi

1650 in stock
553938 on Powermatic Associates

553938

Festo

plastic tubing PUN-6X1-SW-500 Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. ben

500 in stock
197383 on Powermatic Associates

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for energy

50 in stock

Manufacturer warranty

551473 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 551473 with other Pneumatic Tubing products

Outside diameter

Explosion prevention and ...

Pneumatic connection

Tubing characteristics

Inside diameter

Operating medium

Color

Min. bending radius

Ambient temperature

Shore hardness

Selected product

551473
Backordered
551473
Festo

plastic tubing PEN-16X2,5-GN standard O.D tubing, for QS plug connectors, polyethylene (not approved...

Outside diameter16 mm

Explosion prevention and protectionZone 1 (ATEX) Zone 22 (ATEX)

Pneumatic connectionFor plug connection outside ...

Tubing characteristicsSuitable for energy chains i...

Inside diameter10.8 mm

Operating mediumCompressed air as per ISO 85...

ColorGreen

Min. bending radius57.5 mm

Ambient temperature-30 °C ... 60 °C

Shore hardnessD 52 +/-3

159665
150 in stock
159665
Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittin...

Outside diameter6 mm

Explosion prevention and protection-

Pneumatic connection-

Tubing characteristicsSuitable for energy chains i...

Inside diameter4 mm

Operating medium-

Color-

Min. bending radius16 mm

Ambient temperature-35 °C ... 60 °C

Shore hardness-

159668
1650 in stock
159668
Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fit...

Outside diameter10 mm

Explosion prevention and protection-

Pneumatic connection-

Tubing characteristicsSuitable for energy chains i...

Inside diameter7 mm

Operating medium-

Color-

Min. bending radius28 mm

Ambient temperature-35 °C ... 60 °C

Shore hardness-

About the manufacturer

Festo

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Pneumatic tubing, an essential component of pneumatic systems, carries compressed air or gas between parts. Constructed from durable and flexible materials such as polyurethane and polyamide, it comes in various types to meet different needs, including resistance to wear, corrosion, and other environmental elements. This tubing is indispensable in industries such as automation, manufacturing, and ...

Pneumatic Tubing

Recently viewed products

MDM1FSD23A7-EP on Powermatic Associates

MDM1FSD23A7-EP

Novanta IMS

Novanta IMS MDM1FSD23A7-EP is a stepper motor that features an integrated driver and a 2-phase DC stepper motor with SPI. It is designed with an external single-end 256-line optical encoder and a single motor stack in the Plus version, which includes a universal input. The connection is facilitated through a 30cm / 12" bare end flying leads IDC connector. This stepper motor operates on a supply voltage range of 12Vdc-75Vdc, including 24Vdc, 48Vdc, and 72Vdc options. It is mounted via a 57x57mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDM1FSD23A7-EP offers a degree of protection rated at IP20, has a moment of inertia of 0.18kg.cm^2, and provides a stall torque of 64N.cm. Its resolution is defined by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

plastic tubing PEN-16X2,5-GN standard O.D tubing, for QS plug connectors, polyethylene (not approved for use in the food industry). Outside diameter: 16 mm, Bending radius relevant for flow rate: 122 mm, Inside diameter: 10,8 mm, Min. bending radius: 57,5

Similar products from: Pneumatic Tubing

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock