553471 Festo Actuator Accessories

Name: 553471
Brand: Festo

Part#:553471

Alt. Part#:DADB-S1-40-S301-350

Manufacturer:Festo

Category:Actuator Accessories

Product Lifecycle:Active

Product description

bellows kit DADB-S1-40-S301-350 For standard cylinders to ISO 6432 Outside diameter: 46 mm, Size: 40, Stroke range: 301 - 350 mm, Piston rod extension: 101 mm, Design: Round

Product Details

Outside diameter
46 mm
Piston rod extension
101 mm
Mounting position
Any
Note on materials
RoHS-compliant
Threaded pin material
High-alloy stainless steel
Degree of protection
IP54
Pneumatic connection
G1/8
Ambient temperature
-10 °C ... 80 °C
Adaption parts material
PA-reinforced
Size
40
Type code
DADB
Corrosion resistance class (CRC)
3 - High corrosion stress
Product weight
108 g
Seals material
NBR
Stroke range
301 mm ... 350 mm
Design
Bellows kit with ducted exhaust air
Media resistance
Stäube Petrol
Type of mounting
With threaded pin With internal thread
Bellows material
NBR

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

553471 Related Documents

553471 DataSheet.pdf

Similar products from: Festo Actuator Accessories

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock

6140

Festo

self-aligning rod coupler FK-M10X1,25 Compensates for angular and radial misalignment, for fitting on piston rod side. Size: M10x1,25, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Ambient temperature: -40 - 150 °C, Product weigh

2 in stock

537806

Festo

mounting SMBZ-8-32/100 For attaching proximity switches with type 8 slot to cylinders with tie rod. Size: 8, Design: For tie rod, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Materials note: (* Free of copper and PTFE, * Conform

1 in stock

3111

Festo

rod clevis SG-M8 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M8, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M8, Corrosion resistance classification CRC: 1 - Low

2 in stock

151993

Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly position: Any, Mode of operation: single-acting, Operating pressure: <: 6 bar

24 in stock

6146

Festo

rod clevis SG-M16X1,5 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M16x1,5, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M16x1.5, Corrosion resistance classificati

1 in stock

Manufacturer warranty

553471 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 553471 with other Actuator Accessories products

Outside diameter

Piston rod extension

Mounting position

Note on materials

Threaded pin material

Degree of protection

Pneumatic connection

Ambient temperature

Adaption parts material

Size

Selected product

Backordered

553471

Festo

bellows kit DADB-S1-40-S301-350 For standard cylinders to ISO 6432 Outside diameter: 46 mm, Size: 40...

Outside diameter46 mm

Piston rod extension101 mm

Mounting positionAny

Note on materialsRoHS-compliant

Threaded pin materialHigh-alloy stainless steel

Degree of protectionIP54

Pneumatic connectionG1/8

Ambient temperature-10 °C ... 80 °C

Adaption parts materialPA-reinforced

Size40

1 in stock

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly ...

Outside diameter-

Piston rod extension-

Mounting positionAny

Note on materials-

Threaded pin material-

Degree of protection-

Pneumatic connection-

Ambient temperature-10 °C ... 80 °C

Adaption parts material-

Size8

4 in stock

161863

Festo

clevis foot CRLBN-20/25 Corrosion resistant, for cylinders CRDSNU. Size: 20/25, Assembly position: A...

Outside diameter-

Piston rod extension-

Mounting positionAny

Note on materials-

Threaded pin material-

Degree of protection-

Pneumatic connection-

Ambient temperature-40 °C ... 150 °C

Adaption parts material-

Size20/25

About the manufacturer

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Accessories for actuators are supplementary parts engineered to improve the efficiency and operation of actuator systems. These may encompass pneumatic cylinders, rotary actuators, rodless actuators, tie rod cylinders, and combination actuators, to name a few.

Recently viewed products

MDI1PRL17B4-EQ

Novanta IMS

Novanta IMS MDI1PRL17B4-EQ is a stepper motor designed with an integrated driver and operates as a 2-phase DC stepper motor. It features an external single-end 512-line optical encoder and is constructed with a double motor stack in the Plus version, which includes standard features. The connection is facilitated through a non-locking spring-clamp connector and a 10-pin friction-lock wire crimp connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a supply voltage range of 12Vdc to 48Vdc, with an optimal performance at 24Vdc. It is designed for mounting with a 42x42mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDI1PRL17B4-EQ offers a degree of protection rated at IP20, has a moment of inertia of 0.057kg.cm^2, and provides a stall torque of 42N.cm. Its resolution is defined by a 1.8° step angle.

0 in stock

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

HOM2175SB

Schneider Electric

Square D by Schneider Electric HOM2175SB is a load center designed for use with a secondary surge arrestor. It has a rated current of 5A and operates at a rated voltage of 120Vac/240Vac. This load center is protected by a NEMA 1 enclosure and is suitable for single-phase (1PH) electrical networks.

0 in stock

RKC 4.5T-3-RSM 50/S90/S3570

Turck

RKC 4.5T-3-RSM 50/S90/S3570 Turck - RKC 4.5T-3-RSM 50/S90/S3570 Actuator and Sensor Cordset, Extension Cordset

0 in stock

M32-1

Mencom

M32 Male Thread, To, 1.0-NPT Female Thread, Adapter

0 in stock

RSM WKM 126-6M

Turck

RSM WKM 126-6M Turck - RSM WKM 126-6M Actuator and Sensor Cordset, Extension Cordset

0 in stock

MDI1PRL17B4-EQ

Novanta IMS

0 in stock

M-2218-3.0ES500

Novanta IMS

0 in stock

MDI1PRL17B4-EQ

Novanta IMS

0 in stock

M-2218-3.0ES500

Novanta IMS

0 in stock

Relevant products

553491

Verified stock: 0

bellows kit DADB-S1-50-S301-350 For standard cylinders to ISO 6432 Outside diameter: 57 mm, Size: 50, Stroke range: 301 - 350 mm, Piston rod extension: 99 mm, Design: Round

Festo

553473

Verified stock: 0

bellows kit DADB-S1-40-S351-375 For standard cylinders to ISO 6432 Outside diameter: 46 mm, Size: 40, Stroke range: 351 - 375 mm, Piston rod extension: 102 mm, Design: Round

Festo

553453

Verified stock: 0

bellows kit DADB-S1-32-S351-375 For standard cylinders to ISO 6432 Outside diameter: 38 mm, Size: 32, Stroke range: 351 - 375 mm, Piston rod extension: 115 mm, Design: Round

Festo

553403

Verified stock: 0

bellows kit DADB-S1-16-S101-150 For standard cylinders to ISO 6432 Outside diameter: 22 mm, Size: 16, Stroke range: 101 - 150 mm, Piston rod extension: 48 mm, Design: Round

Festo

553499

Verified stock: 0

bellows kit DADB-S1-50-S476-500 For standard cylinders to ISO 6432 Outside diameter: 57 mm, Size: 50, Stroke range: 476 - 500 mm, Piston rod extension: 135 mm, Design: Round

Festo

FAQ

Out if stock but available for backorder.

bellows kit DADB-S1-40-S301-350 For standard cylinders to ISO 6432 Outside diameter: 46 mm, Size: 40, Stroke range: 301 - 350 mm, Piston rod extension: 101 mm, Design: Round

Recommended parts

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock

NLGF36400CU31X

Schneider Electric

PowerPact L-Frame Circuit Breaker

1 in stock

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock

533345

Festo

solenoid valve VMPA1-M1H-G-PI For valve terminal MPA-S. Valve function: 5/3 closed, Type of actuation: electrical, Valve size: 10 mm, Standard nominal flow rate: 320 l/min, Operating pressure: -0,9 - 10 bar

1 in stock

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

Turck

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579 Turck - YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

1 in stock

PAXT0010

Red Lion

1 in stock

553471 Festo Actuator Accessories

Part#:553471

Alt. Part#:DADB-S1-40-S301-350

Manufacturer:Festo

Category:Actuator Accessories

Product description

Product Details

Product condition

553471 Related Documents

Similar products from: Festo Actuator Accessories

34571

Festo

6140

Festo

537806

Festo

3111

Festo

151993

Festo

6146

Festo

553471 Festo

Compare 553471 with other Actuator Accessories products

553471

Festo

34571

Festo

161863

Festo

About the manufacturer

About the Product Category

Recently viewed products

HOM2175SB

Schneider Electric

RKC 4.5T-3-RSM 50/S90/S3570

Turck

M32-1

Mencom

RSM WKM 126-6M

Turck

Relevant products

553491

553473

553453

553403

553499

FAQ

In-stock availability

In-stock availability

Product Details

Product Details

Similar products from: Actuator Accessories

34571

6140

537806

3111

Recommended parts

PAXT0010

Red Lion

NLGF36400CU31X

Schneider Electric

34571

Festo

533345

Festo

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

Turck