558289 Festo Pneumatic Tubing

Name: 558289
Brand: Festo

Part#:558289

Alt. Part#:PUN-H-12X2-RT

Manufacturer:Festo

Category:Pneumatic Tubing

Product Lifecycle:Active

Product description

plastic tubing PUN-H-12X2-RT Approved for use in food processing (hydrolysis resistant) Outside diameter: 12 mm, Bending radius relevant for flow rate: 62 mm, Inside diameter: 8 mm, Min. bending radius: 33 mm, Tubing characteristics: Suitable for energy c

Product Details

Tubing characteristics
Suitable for energy chains in applications with high cycle rates
Operating medium
Compressed air as per ISO 8573-1:2010 [7:-:-] Water as per manufacturer's declaration at www.festo.com
Material fire test
UL94 HB
Pneumatic connection
For plug connection outside diameter 12 mm
Note on materials
Free of copper and PTFE RoHS-compliant
Min. bending radius
33 mm
Type code
PUN-H
Certification
German Technical Control Board (TÜV)
Shore hardness
D 52 +/-3
Material of pneumatic tubing
TPE-U(PU)
Outside diameter
12 mm
Temperature-dependent operating pressure
-0.95 bar ... 10 bar
Ambient temperature
-35 °C ... 60 °C
Color
Red
Pneumatic tubing test conditions
Suitability for energy chains: >5 million cycles as per FN 942021
Inside diameter
8 mm
For use in the food industry
See supplementary material information
Bending radius relevant for flow rate
62 mm
Certificate issuing authority
B 013277 0506 00
Product weight by length
0.0729 kg/m

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

558289 Related Documents

558289 DataSheet.pdf

Similar products from: Festo Pneumatic Tubing

567965

Festo

plastic tubing PUN-H-5/16-NT-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 5/16, Bending radius relevant for flow rate: 0,121 Fuß, Min. bending radius: 0,065 Fuß, Tubing characteristics: Suitable for energy chai

3540 in stock

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. bending

150 in stock

567951

Festo

plastic tubing PUN-H-1/2-BL-150-CB Approved for use in food processing (hydrolysis resistant) Outer diameter, inches: 1/2, Bending radius relevant for flow rate: 0,204 Fuß, Min. bending radius: 0,075 Fuß, Tubing characteristics: Suitable for energy chains

1560 in stock

159668

Festo

plastic tubing PUN-10X1,5-BL Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 10 mm, Bending radius relevant for flow rate: 54 mm, Inside diameter: 7 mm, Min. bendi

1650 in stock

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for energy

50 in stock

553938

Festo

plastic tubing PUN-6X1-SW-500 Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittings (not approved for use in the food industry). Outside diameter: 6 mm, Bending radius relevant for flow rate: 26,5 mm, Inside diameter: 4 mm, Min. ben

500 in stock

Manufacturer warranty

558289 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 558289 with other Pneumatic Tubing products

Tubing characteristics

Operating medium

Material fire test

Pneumatic connection

Note on materials

Min. bending radius

Type code

Certification

Shore hardness

Material of pneumatic tub...

Selected product

Backordered

558289

Festo

plastic tubing PUN-H-12X2-RT Approved for use in food processing (hydrolysis resistant) Outside diam...

Tubing characteristicsSuitable for energy chains i...

Operating mediumCompressed air as per ISO 85...

Material fire testUL94 HB

Pneumatic connectionFor plug connection outside ...

Note on materialsFree of copper and PTFE RoHS...

Min. bending radius33 mm

Type codePUN-H

CertificationGerman Technical Control Boa...

Shore hardnessD 52 +/-3

Material of pneumatic tubingTPE-U(PU)

50 in stock

197383

Festo

plastic tubing PUN-H-4X0,75-BL Approved for use in food processing (hydrolysis resistant) Outside di...

Tubing characteristicsSuitable for energy chains i...

Operating mediumCompressed air as per ISO 85...

Material fire testUL94 HB

Pneumatic connection-

Note on materials-

Min. bending radius8 mm

Type codePUN-H

Certification-

Shore hardness-

Material of pneumatic tubing-

150 in stock

159665

Festo

plastic tubing PUN-6X1-SW Standard O.D tubing, for QS plug connectors, CN and CK polyurethane fittin...

Tubing characteristicsSuitable for energy chains i...

Operating mediumCompressed air as per ISO 85...

Material fire testUL94 HB

Pneumatic connection-

Note on materials-

Min. bending radius16 mm

Type codePUN

Certification-

Shore hardness-

Material of pneumatic tubing-

About the manufacturer

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Pneumatic tubing, an essential component of pneumatic systems, carries compressed air or gas between parts. Constructed from durable and flexible materials such as polyurethane and polyamide, it comes in various types to meet different needs, including resistance to wear, corrosion, and other environmental elements. This tubing is indispensable in industries such as automation, manufacturing, and ...

Recently viewed products

MDI3CRL34A7-EQ

Novanta IMS

Novanta IMS MDI3CRL34A7-EQ is a stepper motor characterized by its integrated driver and 2-phase DC stepper motor functionality. It features an external single-end 512-line optical encoder and a single motor stack, enhanced by the Plus 2 version for expanded features. This part offers a 14-pin locking wire crimp connector and a 10-pin friction-lock wire crimp connector for its connections. It supports RS-422 and RS-485 communication protocols. The supply voltage ranges from 12Vdc to 75Vdc, with specific ratings at 24Vdc, 48Vdc, and 72Vdc. It is designed for mounting with an 85x85mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDI3CRL34A7-EQ has an IP20 degree of protection, a moment of inertia of 1kg.cm^2, a stall torque of 233N.cm, and a resolution characterized by a 1.8° step angle.

0 in stock

M-1719-1.5S

Novanta IMS

Novanta IMS M-1719-1.5S is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a smooth-shaft design with a single flat and triple (3) motor stack. It is equipped with bare end flying leads for connection, and operates at a rated current of 1.5A with a supply voltage range of 24Vdc to 48Vdc, specifically 24Vdc. This stepper motor is designed for mounting with a 42x42mm flange and can operate within an ambient air temperature range of -25 to +40°C. It has a moment of inertia of 0.082kg.cm^2 and provides a stall torque of 53N.cm (75oz-in). The motor is designed for storage in temperatures ranging from -25 to +70°C and offers a resolution of 1.8° step angle.

0 in stock

LMHOE571

Novanta IMS

Novanta IMS LMHOE571 is a stepper motor designed for applications requiring integrated drive and high-torque capabilities. This model falls within the high-torque stepper motors sub-range and features a single motor stack in an open-loop system. It offers a variety of connection types, including a 2-pin screw-lock connector, a 7-pin spring-clamp connection, and a 9-pin D-sub male connector, ensuring versatile integration options. The LMHOE571 supports Ethernet/IP and Modbus TCP communication protocols for efficient network integration. It operates on a supply voltage range of 12Vdc to 60Vdc, with optimal performance at 24Vdc or 48Vdc. The motor is designed for mounting via a 57x57mm flange, providing a secure installation. With a degree of protection rated at IP20, it is suited for use in environments where protection against solid objects is necessary. The motor's moment of inertia is 0.14kg.cm^2, and it delivers a stall torque of 107N.cm. It achieves precise motion control with a resolution of 1.8° step angle.

0 in stock

PSWS 3M-10/S90

Turck

PSWS 3M-10/S90 Turck - PSWS 3M-10/S90 Actuator and Sensor Cordset, Connection Cable

0 in stock

LMHCE572C

Novanta IMS

Novanta IMS LMHCE572C is a stepper motor within the high-torque stepper motors sub-range, featuring an integrated driver and a high-torque DC stepper motor. It is designed with an incremental magnetic encoder, double (2) motor stack, and operates on closed-loop hMTechnology. The connection types include a 4-pin M12 male connector, a 12-pin M12 male connector, and a 5-pin M12 male connector, supporting Ethernet/IP and Modbus TCP communication protocols. The supply voltage ranges from 12Vdc to 60Vdc, with optimal performance at 24Vdc and 48Vdc. It is mounted via a 57x57mm flange and offers a degree of protection rated at IP65. The moment of inertia is 0.22kg.cm^2, with a stall torque of 186N.cm and a resolution of a 1.8° step angle.

0 in stock

RKC 4.5T-3-RSM 50/S90/S3570

Turck

RKC 4.5T-3-RSM 50/S90/S3570 Turck - RKC 4.5T-3-RSM 50/S90/S3570 Actuator and Sensor Cordset, Extension Cordset

0 in stock

BI2-WLK-AP6-0.3-RSE 4T-P7X2/S1611

Turck

BI2-WLK-AP6-0.3-RSE 4T-P7X2/S1611 Turck - BI2-WLK-AP6-0.3-RSE 4T-P7X2/S1611

0 in stock

MDI3CRL34A7-EQ

Novanta IMS

0 in stock

M-1719-1.5S

Novanta IMS

0 in stock

LMHOE571

Novanta IMS

0 in stock

LMHCE572C

Novanta IMS

0 in stock

MDI3CRL34A7-EQ

Novanta IMS

0 in stock

M-1719-1.5S

Novanta IMS

0 in stock

LMHOE571

Novanta IMS

0 in stock

Relevant products

558283

Verified stock: 0

plastic tubing PUN-H-16X2,5-SI Approved for use in food processing (hydrolysis resistant) Outside diameter: 16 mm, Bending radius relevant for flow rate: 88 mm, Inside diameter: 11 mm, Min. bending radius: 38 mm, Tubing characteristics: Suitable for energ

Festo

558222

Verified stock: 0

plastic tubing PLN-16X2-RT highly resistant to chemicals and hydrolysis. Outside diameter: 16 mm, Bending radius relevant for flow rate: 95 mm, Inside diameter: 12 mm, Min. bending radius: 55 mm, Temperature dependent operating pressure: -0,95 - 14 bar

Festo

558290

Verified stock: 0

plastic tubing PUN-H-16X2,5-RT Approved for use in food processing (hydrolysis resistant) Outside diameter: 16 mm, Bending radius relevant for flow rate: 88 mm, Inside diameter: 11 mm, Min. bending radius: 38 mm, Tubing characteristics: Suitable for energ

Festo

558257

Verified stock: 0

plastic tubing PUN-H-4X0,75-BL-500 Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for en

Festo

558264

Verified stock: 0

plastic tubing PUN-H-4X0,75-NT-500 Approved for use in food processing (hydrolysis resistant) Outside diameter: 4 mm, Bending radius relevant for flow rate: 16 mm, Inside diameter: 2,6 mm, Min. bending radius: 8 mm, Tubing characteristics: Suitable for en

Festo

FAQ

Out if stock but available for backorder.

Recommended parts

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock

NLGF36400CU31X

Schneider Electric

PowerPact L-Frame Circuit Breaker

1 in stock

MCM17A-PWM-06

Schneider Electric

17 Frame Stepper/Drive/Encoder

1 in stock

WD-RKCV 4.5T-2/S653

Turck

WD-RKCV 4.5T-2/S653 Turck - WD-RKCV 4.5T-2/S653 Washdown Cordset, Connection Cordset

1 in stock

FSV-SS 1/2 KIT

Turck

FSV-SS 1/2 KIT Turck - FSV-SS 1/2 KIT Mounting Accessories

1 in stock

PAXT0010

Red Lion

1 in stock

558289 Festo Pneumatic Tubing

Part#:558289

Alt. Part#:PUN-H-12X2-RT

Manufacturer:Festo

Category:Pneumatic Tubing

Product description

Product Details

Product condition

558289 Related Documents

Similar products from: Festo Pneumatic Tubing

567965

Festo

159665

Festo

567951

Festo

159668

Festo

197383

Festo

553938

Festo

558289 Festo

Compare 558289 with other Pneumatic Tubing products

558289

Festo

197383

Festo

159665

Festo

About the manufacturer

About the Product Category

Recently viewed products

PSWS 3M-10/S90

Turck

LMHCE572C

Novanta IMS

RKC 4.5T-3-RSM 50/S90/S3570

Turck

BI2-WLK-AP6-0.3-RSE 4T-P7X2/S1611

Turck

Relevant products

558283

558222

558290

558257

558264

FAQ

In-stock availability

In-stock availability

Product Details

Product Details

Similar products from: Pneumatic Tubing

1J-207-05

1J-077-08

1C-157-27

1J-077-10

Recommended parts

PAXT0010

Red Lion

NLGF36400CU31X

Schneider Electric

MCM17A-PWM-06

Schneider Electric

WD-RKCV 4.5T-2/S653

Turck

FSV-SS 1/2 KIT

Turck