8001227 Festo Pressure Sensors

Product Details

• Electrical connection 1, connection technology
  M12x1 A-coded as per EN 61076-2-101
• CE marking (see declaration of conformity)
  As per EU EMC directive As per EU RoHS directive
• Measured variable
  Relative pressure
• Pressure measuring range initial value
  0 bar
• Repetition accuracy in ± %FS
  0.3 %FS
• Ambient temperature
  0 °C ... 50 °C
• Temperature co-efficient in ± %FS/K
  0.05 %FS/K
• Max. load resistance of current output
  500 Ohm
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data width IN
  2 Byte
• Mounting position
  Any
• Product weight
  70 g
• Setting range hysteresis
  0 % ... 90 %
• Type code
  SPAU
• Electrical connection 1, connection type
  Plug
• Certification
  RCM compliance mark c UL us - Listed (OL)
• Pressure measuring range end value
  -1 bar
• Information on operating and pilot media
  Operation with oil lubrication possible
• Switching function
  Freely programmable
• Switching element function
  N/C contact/N/O contact switchable
Min. load resistance of voltage output
10 kOhm
Protocol
IO-Link®
IO-Link®, function classes
Binary data channel (BDC) Teach channel
IO-Link®, data memory required
500 byte
Display type
Illuminated LCD
Degree of protection
IP65 IP67
IO-Link®, communication mode
COM2 (38,4 kBd)
IO-Link®, process data width OUT
0 Byte
DC operating voltage range
20 V ... 30 V
Reverse polarity protection
for all electrical connections
Setting range threshold value
0 % ... 100 %
KC characters
KC EMC
Electrical connection 1, number of pins/wires
4
Note on materials
RoHS-compliant
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas
Temperature of medium
0 °C ... 50 °C
ADC resolution
12 bit
Rise time
3 ms
Short-circuit protection
yes
IO-Link®, SIO mode support
Yes
IO-Link®, process data content IN
14 bit PDV (pressure measurement) 2 bit BDC (pressure monitoring)
Type of mounting
Front panel mounting
Displayable unit(s)
MPa psi
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Electrical connection for input 1, connection pattern
00995386
Symbol
00995410
Method of measurement
Piezoresistive pressure sensor
Max. overload pressure
5 bar
Accuracy in ± % FS
1.5 %FS
Switching output
2 x PNP or 2 x NPN switchable
Max. output current
100 mA
Analog output
0 - 10 V 1 - 5 V
IO-Link®, profile
Smart sensor profile
IO-Link®, port class
A
IO-Link®, minimum cycle time
3 ms
Pneumatic connection
QS-4
Protection against tampering
IO-Link® PIN code
Setting options
IO-Link® Via display and pushbuttons

8001227 Related Documents