8005046 Festo Quarter Turn Actuators

Product Details

• Swivel angle
  92 deg
• Information on the end-position adjusting range
  One end position optionally adjustable
• Depth shaft connection
  29.5 mm
• Standard connection for valve
  ISO 5211
• Position sensing
  None
• Nominal operating pressure
  5.6 bar
• Mounting position
  Any
• Valve connection conforms to standard
  VDI/VDE 3845 (NAMUR)
• Connection pressure for spring force
  2.8 bar
• Type of (ignition) protection for dust
  Ex h IIIC T85°C...T200°C Db X
• Spring return torque with 90° swivel angle
  180 Nm
• Shaft connection
  T27
• Material number for shaft
  1.4305
• Size of valve actuator
  0360
• Type code
  DAPS
• Mode of operation
  Single-acting
• Cushioning
  No cushioning
• Safety integrity level (SIL)
  Up to SIL 2 high demand mode Up to SIL 2 low demand mode
• Explosion prevention and protection
  Zone 1 (ATEX) Zone 22 (ATEX)
• Information on operating and pilot media
  Operation with oil lubrication possible (required for further use)
Spring return torque at 0° swivel angle
120 Nm
Product weight
19500 g
Cover material
Wrought aluminum alloy
Material of screws
High-alloy steel
Flange hole pattern
F10 F12
Design
Scotch yoke system
Closing direction
Clockwise closing
Operating pressure
2.8 bar ... 8.4 bar
ATEX category for dust
II 2D
Operating medium
Compressed air as per ISO 8573-1:2010 [7:4:4]
Corrosion resistance class (CRC)
2 - Moderate corrosion stress
Pneumatic connection
G1/4
Shaft material
High-alloy steel
Symbol
00991266
ATEX category gas
II 2G
Explosive ambient temperature
-50°C <= Ta <= +60°C
CE marking (see declaration of conformity)
as per EU explosion protection directive (ATEX)
Spring return torque with 50° swivel angle
90 Nm
Seals material
FPM PUR
Type of ignition protection for gas
Ex h IIC T6...T3 Gb X
Ambient temperature
-20 °C ... 80 °C
Spring force
1
Air consumption at 6 bar per cycle 0°-nominal swivel angle-0°
14 l
Housing material
Wrought aluminum alloy
Note on materials
RoHS-compliant

8005046 Related Documents