8069005 Festo Actuator Accessories

Name: 8069005
Brand: Festo

Part#:8069005

Alt. Part#:DAYP-L8-20

Manufacturer:Festo

Category:Actuator Accessories

Product Lifecycle:Active

Product description

shock absorber retainer DAYP-L8-20 Size: 20, Assembly position: Any, Corrosion resistance classification CRC: 1 - Low corrosion stress, Ambient temperature: 0 - 60 °C, Product weight: 165 g

Product Details

Ambient temperature
0 °C ... 60 °C
Type of mounting
With through-hole
Product weight
165 g
Stops material
High-alloy stainless steel
Size
20
Corrosion resistance class (CRC)
1 - Low corrosion stress
Stop screw material
Steel, galvanized
Type code
DAYP
Note on materials
RoHS-compliant Copper-free
Mounting position
Any
Nut material
Steel, galvanized

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

8069005 Related Documents

8069005 DataSheet.pdf

Similar products from: Festo Actuator Accessories

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock

6140

Festo

self-aligning rod coupler FK-M10X1,25 Compensates for angular and radial misalignment, for fitting on piston rod side. Size: M10x1,25, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Ambient temperature: -40 - 150 °C, Product weigh

2 in stock

537806

Festo

mounting SMBZ-8-32/100 For attaching proximity switches with type 8 slot to cylinders with tie rod. Size: 8, Design: For tie rod, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Materials note: (* Free of copper and PTFE, * Conform

1 in stock

3111

Festo

rod clevis SG-M8 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M8, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M8, Corrosion resistance classification CRC: 1 - Low

2 in stock

151993

Festo

clamping module EV-10/30-3 With reset function Stroke: 3 mm, Clamping surface: 10x30, Assembly position: Any, Mode of operation: single-acting, Operating pressure: <: 6 bar

24 in stock

6146

Festo

rod clevis SG-M16X1,5 With hexagonal nut, for swivelling cylinder mounting (piston rod side) as per DIN ISO 8140. Size: M16x1,5, Conforms to standard: (* DIN 71752, * ISO 8140), Threaded connection: Female thread M16x1.5, Corrosion resistance classificati

1 in stock

Manufacturer warranty

8069005 Festo

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 8069005 with other Actuator Accessories products

Ambient temperature

Type of mounting

Product weight

Stops material

Size

Corrosion resistance clas...

Stop screw material

Type code

Note on materials

Mounting position

Selected product

Backordered

8069005

Festo

shock absorber retainer DAYP-L8-20 Size: 20, Assembly position: Any, Corrosion resistance classifica...

Ambient temperature0 °C ... 60 °C

Type of mountingWith through-hole

Product weight165 g

Stops materialHigh-alloy stainless steel

Size20

Corrosion resistance class (CRC)1 - Low corrosion stress

Stop screw materialSteel, galvanized

Type codeDAYP

Note on materialsRoHS-compliant Copper-free

Mounting positionAny

1 in stock

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly ...

Ambient temperature-10 °C ... 80 °C

Type of mountingWith lock nut

Product weight32 g

Stops material-

Size8

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Stop screw material-

Type codeYSR-C

Note on materialsFree of copper and PTFE RoHS...

Mounting positionAny

4 in stock

161863

Festo

clevis foot CRLBN-20/25 Corrosion resistant, for cylinders CRDSNU. Size: 20/25, Assembly position: A...

Ambient temperature-40 °C ... 150 °C

Type of mounting-

Product weight82 g

Stops material-

Size20/25

Corrosion resistance class (CRC)4 - Particularly high corros...

Stop screw material-

Type codeCRLBN

Note on materialsFree of copper and PTFE RoHS...

Mounting positionAny

1 in stock

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly ...

Ambient temperature-10 °C ... 80 °C

Type of mountingWith lock nut

Product weight32 g

Stops material-

Size8

Corrosion resistance class (CRC)2 - Moderate corrosion stres...

Stop screw material-

Type codeYSR-C

Note on materialsFree of copper and PTFE RoHS...

Mounting positionAny

About the manufacturer

Powermatic Associates is an authorized Festo distributor, proudly offering a wide array of Festo's innovative industrial automation products and solutions. Festo is a globally recognized leader in automation technology and pneumatic solutions, renowned for their commitment to quality, efficiency, and sustainability. With a vast portfolio ranging from actuators, valves, sensors, and connectors to e...

About the Product Category

Accessories for actuators are supplementary parts engineered to improve the efficiency and operation of actuator systems. These may encompass pneumatic cylinders, rotary actuators, rodless actuators, tie rod cylinders, and combination actuators, to name a few.

Recently viewed products

MDI1PRL17B4-EQ

Novanta IMS

Novanta IMS MDI1PRL17B4-EQ is a stepper motor designed with an integrated driver and operates as a 2-phase DC stepper motor. It features an external single-end 512-line optical encoder and is constructed with a double motor stack in the Plus version, which includes standard features. The connection is facilitated through a non-locking spring-clamp connector and a 10-pin friction-lock wire crimp connector, supporting RS-422 and RS-485 communication protocols. This stepper motor operates on a supply voltage range of 12Vdc to 48Vdc, with an optimal performance at 24Vdc. It is designed for mounting with a 42x42mm flange and can operate in ambient air temperatures ranging from 0 to +85°C. The MDI1PRL17B4-EQ offers a degree of protection rated at IP20, has a moment of inertia of 0.057kg.cm^2, and provides a stall torque of 42N.cm. Its resolution is defined by a 1.8° step angle.

0 in stock

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

HOM2175SB

Schneider Electric

Square D by Schneider Electric HOM2175SB is a load center designed for use with a secondary surge arrestor. It has a rated current of 5A and operates at a rated voltage of 120Vac/240Vac. This load center is protected by a NEMA 1 enclosure and is suitable for single-phase (1PH) electrical networks.

0 in stock

RKC 4.5T-3-RSM 50/S90/S3570

Turck

RKC 4.5T-3-RSM 50/S90/S3570 Turck - RKC 4.5T-3-RSM 50/S90/S3570 Actuator and Sensor Cordset, Extension Cordset

0 in stock

M32-1

Mencom

M32 Male Thread, To, 1.0-NPT Female Thread, Adapter

0 in stock

RSM WKM 126-6M

Turck

RSM WKM 126-6M Turck - RSM WKM 126-6M Actuator and Sensor Cordset, Extension Cordset

0 in stock

MDI1PRL17B4-EQ

Novanta IMS

0 in stock

M-2218-3.0ES500

Novanta IMS

0 in stock

MDI1PRL17B4-EQ

Novanta IMS

0 in stock

M-2218-3.0ES500

Novanta IMS

0 in stock

Relevant products

8069237

Verified stock: 6

reducing nipple NPFC-R-G1-G12-MF Material threaded fitting: Nickel-plated brass, Container size: 10, Operating pressure: -0,95 - 50 bar, Operating medium: Compressed air in accordance with ISO8573-1:2010 [-:-:-], Corrosion resistance classification CRC: 1

Festo

8069876

Verified stock: 0

screw kit VAME-B10-20-S Container size: 2, Corrosion resistance classification CRC: 2 - Moderate corrosion stress, Product weight: 4,5 g, Materials note: Conforms to RoHS

Festo

8069569

Verified stock: 0

vacuum generator OVEL-10-H-15-PQ-VQ6-UA-C-A-B2V-H3 Nominal size, Laval nozzle: 0,95 mm, Grid dimension: 15 mm, Design, silencer: open, Assembly position: Any, Ejector characteristic: (* High vacuum, * Standard)

Festo

8069015

Verified stock: 0

profile mounting DAMH-L8-32-PL-1 Size: 32, Assembly position: Any, Corrosion resistance classification CRC: 1 - Low corrosion stress, Ambient temperature: 0 - 60 °C, Product weight: 160 g

Festo

8069002

Verified stock: 0

shock absorber DYSS-8-8-Y1F Size: 20, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

Festo

FAQ

Out if stock but available for backorder.

shock absorber retainer DAYP-L8-20 Size: 20, Assembly position: Any, Corrosion resistance classification CRC: 1 - Low corrosion stress, Ambient temperature: 0 - 60 °C, Product weight: 165 g

Recommended parts

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock

NLGF36400CU31X

Schneider Electric

PowerPact L-Frame Circuit Breaker

1 in stock

34571

Festo

shock absorber YSR-8-8-C Self-adjusting Size: 8, Stroke: 8 mm, Cushioning: self-adjusting, Assembly position: Any, Position detection: No

1 in stock

533345

Festo

solenoid valve VMPA1-M1H-G-PI For valve terminal MPA-S. Valve function: 5/3 closed, Type of actuation: electrical, Valve size: 10 mm, Standard nominal flow rate: 320 l/min, Operating pressure: -0,9 - 10 bar

1 in stock

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

Turck

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579 Turck - YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

1 in stock

PAXT0010

Red Lion

1 in stock

8069005 Festo Actuator Accessories

Part#:8069005

Alt. Part#:DAYP-L8-20

Manufacturer:Festo

Category:Actuator Accessories

Product description

Product Details

Product condition

8069005 Related Documents

Similar products from: Festo Actuator Accessories

34571

Festo

6140

Festo

537806

Festo

3111

Festo

151993

Festo

6146

Festo

8069005 Festo

Compare 8069005 with other Actuator Accessories products

8069005

Festo

34571

Festo

161863

Festo

About the manufacturer

About the Product Category

Recently viewed products

HOM2175SB

Schneider Electric

RKC 4.5T-3-RSM 50/S90/S3570

Turck

M32-1

Mencom

RSM WKM 126-6M

Turck

Relevant products

8069237

8069876

8069569

8069015

8069002

FAQ

In-stock availability

In-stock availability

Product Details

Product Details

Similar products from: Actuator Accessories

34571

6140

537806

3111

Recommended parts

PAXT0010

Red Lion

NLGF36400CU31X

Schneider Electric

34571

Festo

533345

Festo

YP2-PSG4-1/2PKG3Z-0.2/0.2/S1579

Turck