8083717 Festo Electric Actuators

Product Details

• Logic input specification
  Based on IEC 61131-2, type 1
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Parameterization interface
  IO-Link® User interface
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
• Power supply, type of connection
  Plug
• DC nominal voltage
  24 V
• Rotor position sensor resolution
  16 bit
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data width OUT
  2 Byte
• Size
  60
• Spindle pitch
  12 mm/U
• Symbol
  00997294
• Switching logic at outputs
  PNP (positive switching)
• Relative air humidity
  0 - 90 %
• Insulation protection class
  B
• Display
  LED
• Permissible voltage fluctuations
  +/- 15 %
• Power supply, connection pattern
  00995989
• Logic interface, number of poles/wires
  8
• Additional functions
  User interface Integrated end-position sensing
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Rotor position sensor
Absolute encoder, single-turn
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Max. current of digital logic outputs
100 mA
Nominal current
5.3 A
IO-Link®, port class
A
IO-Link®, minimum cycle time
1 ms
Stroke reserve
0 mm
Guide
Recirculating ball bearing guide
KC characters
KC EMC
IO-Link®, service data contents IN
32 bit force 32 bit speed
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Ready status indication
LED
Rotor position sensor measuring principle
Magnetic
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Number of digital logic outputs 24 V DC
2
Storage temperature
-20 °C ... 60 °C
IO-Link®, Connection technology
Plug
Max. cable length
15 m outputs 20 m for IO-Link® operation
Input switching logic
PNP (positive switching)
Logic interface, connection type
Plug
Number of digital logic inputs
2
Power supply, number of pins/wires
4
Work range of logic input
24 V
Protection class
III
Working stroke
75 mm
Max. current consumption
5300 mA
IO-Link®, number of ports
1
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, SIO mode support
Yes
Reversing backlash
150 µm
Type code
EGSS
Homing
Fixed stop block positive Reference switch
Max. acceleration
5 m/s²
Max. speed
0.24 m/s
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, data memory required
500 byte
Design
Electrical mini-slide With integrated drive
Repetition accuracy
±0.015 mm
Degree of protection
IP40
Dynamic basic load rating, ball screw drive
4600 N
Max. torque Mx
20 Nm
Max. feed force Fx
250 N
Linear guide statistical basic load rating
26900 N
Screw diameter
12 mm
Mounting position
Any
Spindle type
Ball screw drive
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Ambient temperature
0 °C ... 50 °C
Max. force Fz
4937 N
Guide value for payload, horizontal
10 kg
Feed constant
12 mm/U
Statistical fixed bearing load rating
7000 N
Product weight
3447 g
Motor type
Stepper motor
Position sensing
Motor encoder For proximity sensor
Corrosion resistance class (CRC)
0 - No corrosion stress
Linear guide dynamic basic load rating
13400 N
Max. torque My
30 Nm
Max. torque Mz
30 Nm
Reference value, running performance
5000 km
Duty cycle
100%
Fixed bearing dynamic basic load rating
13321 N
Max. force Fy
4937 N
Max. radial force on actuator shaft
420 N
Ball screw drive statistical basic load rating
8500 N
Maintenance interval
Life-time lubrication
Moving mass at 0 mm stroke
675 g
Guide rail material
Roller bearing steel
Housing material
Wrought aluminum alloy, anodized
Certification
RCM compliance mark
Guide value for payload, vertical
10 kg
Basic weight with 0 mm stroke
2735 g
Slide carriage material
Roller bearing steel
Spindle nut material
Roller bearing steel
Additional weight per 10 mm stroke
95 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Additional moving mass per 10 mm stroke
40 g
Type of mounting
With internal thread With cylindrical pin
Piston rod material
High-alloy stainless steel
Slide material
Wrought aluminum alloy, anodized
Material of yoke plate
Wrought aluminum alloy, anodized
Spindle material
Roller bearing steel

8083717 Related Documents