8083802 Festo Electric Actuators

Product Details

• KC characters
  KC EMC
• Switching logic at outputs
  PNP (positive switching)
• Relative air humidity
  0 - 90 %
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Characteristics of logic input
  Configurable Not galvanically isolated
• Logic interface, connection pattern
  00992264
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, number of poles/wires
  8
• Storage temperature
  -20 °C ... 60 °C
• IO-Link®, process data width IN
  2 Byte
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Parameterization interface
  IO-Link® User interface
• Input switching logic
  PNP (positive switching)
• Power supply, type of connection
  Plug
• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Power supply, number of pins/wires
  4
• Rotor position sensor resolution
  16 bit
• IO-Link®, Connection technology
  Plug
• IO-Link®, protocol version
  Device V 1.1
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
IO-Link®, SIO mode support
Yes
Working stroke
50 mm
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Insulation protection class
B
Max. cable length
15 m outputs 20 m for IO-Link® operation
Logic interface, connection type
Plug
Number of digital logic inputs
2
Max. current consumption
3000 mA
IO-Link®, port class
A
IO-Link®, process data width OUT
2 Byte
Reversing backlash
150 µm
Guide
Recirculating ball bearing guide
Spindle type
Ball screw drive
Repetition accuracy
±0.015 mm
Ambient temperature
0 °C ... 50 °C
Additional functions
User interface Integrated end-position sensing
Rotor position sensor
Absolute encoder, single-turn
Ready status indication
LED
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Permissible voltage fluctuations
+/- 15 %
DC nominal voltage
24 V
Nominal current
3 A
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Screw diameter
8 mm
Homing
Fixed stop block positive Reference switch
Logic input specification
Based on IEC 61131-2, type 1
Display
LED
Rotor position sensor measuring principle
Magnetic
Power supply, connection pattern
00995989
Number of digital logic outputs 24 V DC
2
Max. current of digital logic outputs
100 mA
Work range of logic input
24 V
IO-Link®, number of ports
1
IO-Link®, service data contents IN
32 bit force 32 bit speed
Protection class
III
Size
32
Stroke reserve
0 mm
Type code
EGSS
Motor type
Stepper motor
Max. acceleration
5 m/s²
IO-Link®, data memory required
500 byte
Spindle pitch
8 mm/U
Mounting position
Any
Position sensing
Motor encoder For proximity sensor
Degree of protection
IP40
Dynamic basic load rating, ball screw drive
2000 N
Max. torque Mz
3.17 Nm
Statistical fixed bearing load rating
1792 N
Moving mass at 0 mm stroke
149 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide material
Wrought aluminum alloy, anodized
Design
Electrical mini-slide With integrated drive
Symbol
00997294
Duty cycle
100%
Certification
RCM compliance mark
Max. torque Mx
3.4 Nm
Max. radial force on actuator shaft
140 N
Linear guide statistical basic load rating
3880 N
Basic weight with 0 mm stroke
924 g
Max. speed
0.19 m/s
Corrosion resistance class (CRC)
0 - No corrosion stress
Linear guide dynamic basic load rating
2135 N
Max. force Fy
991 N
Guide value for payload, vertical
2 kg
Feed constant
8 mm/U
Maintenance interval
Life-time lubrication
Guide rail material
Roller bearing steel
Piston rod material
High-alloy stainless steel
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Fixed bearing dynamic basic load rating
3795 N
Max. torque My
3.17 Nm
Max. feed force Fx
60 N
Reference value, running performance
5000 km
Additional weight per 10 mm stroke
30 g
Additional moving mass per 10 mm stroke
12 g
Housing material
Wrought aluminum alloy, anodized
Spindle nut material
Roller bearing steel
Max. force Fz
991 N
Guide value for payload, horizontal
2 kg
Ball screw drive statistical basic load rating
3700 N
Product weight
1074 g
Type of mounting
With internal thread With cylindrical pin
Slide carriage material
Roller bearing steel
Material of yoke plate
Wrought aluminum alloy, anodized
Spindle material
Roller bearing steel

8083802 Related Documents