8083818 Festo Electric Actuators

Product Details

• Switching logic at outputs
  PNP (positive switching)
• Insulation protection class
  B
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• KC characters
  KC EMC
• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• Logic input specification
  Based on IEC 61131-2, type 1
• Characteristics of logic input
  Configurable Not galvanically isolated
• Input switching logic
  PNP (positive switching)
• Number of digital logic inputs
  2
• Additional functions
  User interface Integrated end-position sensing
• Relative air humidity
  0 - 90 %
• Parameterization interface
  IO-Link® User interface
• Display
  LED
• Power supply, type of connection
  Plug
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Logic interface, number of poles/wires
  8
• Storage temperature
  -20 °C ... 60 °C
• Rotor position sensor
  Absolute encoder, single-turn
• Note on ambient temperature
  Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Permissible voltage fluctuations
+/- 15 %
Number of digital logic outputs 24 V DC
2
Rotor position sensor resolution
16 bit
IO-Link®, number of ports
1
Ready status indication
LED
Max. cable length
15 m outputs 20 m for IO-Link® operation
Logic interface, connection pattern
00992264
Rotor position sensor measuring principle
Magnetic
Logic interface, connection type
Plug
Power supply, connection pattern
00995989
Max. current of digital logic outputs
100 mA
IO-Link®, communication mode
COM3 (230.4 kBd)
IO-Link®, protocol version
Device V 1.1
Protection class
III
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
DC nominal voltage
24 V
Max. current consumption
3000 mA
IO-Link®, Connection technology
Plug
Power supply, number of pins/wires
4
Nominal current
3 A
Work range of logic input
24 V
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
Stroke reserve
0 mm
Mounting position
Any
Homing
Fixed stop block positive Reference switch
IO-Link®, port class
A
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, SIO mode support
Yes
Working stroke
125 mm
Screw diameter
10 mm
Position sensing
Motor encoder For proximity sensor
IO-Link®, process data width IN
2 Byte
IO-Link®, minimum cycle time
1 ms
IO-Link®, process data width OUT
2 Byte
Reversing backlash
150 µm
IO-Link®, data memory required
500 byte
Size
45
Type code
EGSS
Spindle pitch
10 mm/U
Guide
Recirculating ball bearing guide
Motor type
Stepper motor
Symbol
00997294
Design
Electrical mini-slide With integrated drive
Max. speed
0.25 m/s
Max. acceleration
5 m/s²
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Linear guide dynamic basic load rating
3240 N
Max. torque My
7.05 Nm
Spindle type
Ball screw drive
Repetition accuracy
±0.015 mm
Degree of protection
IP40
Max. force Fy
1314 N
Max. torque Mx
8.14 Nm
Linear guide statistical basic load rating
5630 N
Moving mass at 0 mm stroke
212 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Slide carriage material
Roller bearing steel
Spindle material
Roller bearing steel
Duty cycle
100%
Certification
RCM compliance mark
Fixed bearing dynamic basic load rating
7413 N
Corrosion resistance class (CRC)
0 - No corrosion stress
Ambient temperature
0 °C ... 50 °C
Max. radial force on actuator shaft
340 N
Dynamic basic load rating, ball screw drive
3200 N
Max. force Fz
1314 N
Max. torque Mz
7.05 Nm
Guide value for payload, horizontal
6 kg
Max. feed force Fx
120 N
Ball screw drive statistical basic load rating
5900 N
Additional weight per 10 mm stroke
63 g
Type of mounting
With internal thread With cylindrical pin
Housing material
Wrought aluminum alloy, anodized
Slide material
Wrought aluminum alloy, anodized
Guide value for payload, vertical
6 kg
Statistical fixed bearing load rating
3966 N
Additional moving mass per 10 mm stroke
30 g
Spindle nut material
Roller bearing steel
Feed constant
10 mm/U
Maintenance interval
Life-time lubrication
Product weight
2024 g
Material of yoke plate
Wrought aluminum alloy, anodized
Piston rod material
High-alloy stainless steel
Reference value, running performance
5000 km
Basic weight with 0 mm stroke
1238 g
Guide rail material
Roller bearing steel

8083818 Related Documents