8086604 Festo Pneumatic Components

Product Details

• Note on degree of protection
  Unused connections sealed
• Power supply, number of pins/wires
  4
• Max. power supply
  2 x 4 A (external fuse required)
• Power supply, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Intrinsic current consumption at nominal operating voltage load
  Typically 5 mA
• Power supply, type of connection
  Plug
• Max. cable length
  20 m for IO-Link® operation 50 m system communication
• Nominal operating voltage DC for electronics/sensors
  24 V
• Diagnose per internal communication
  IO-Link® event Load undervoltage
• Permissible voltage fluctuations for electronics/sensors
  ± 25 %
• Voltage forwarding, connection technology
  M8x1, A-coded as per EN 61076-2-104
• Voltage forwarding, connection type
  Socket
• Diagnostics via LED
  Diagnostics per channel Status per module
• Voltage forwarding, function
  Outgoing electronics/sensors and load
• Nominal operating voltage DC load
  24 V
• IO-Link®, communication
  C/Q LED green
• Degree of protection
  IP65 IP67
• Protocol
  IO-Link®
• Type of mounting
  With through-hole
• KC characters
  KC EMC
Power supply, function
Incoming electronics/sensors and load
Relative air humidity
5 - 95 % Non-condensing
Communication interface, protocol
AP-COM
Communication interface, number of pins/wires
4
Corrosion resistance class (CRC)
1 - Low corrosion stress
Ambient temperature
-20 °C ... 50 °C
IO-Link®, port class
B
IO-Link®, process data width IN
12–132 bytes parameterizable
Housing material
PA Die-cast zinc, nickel-plated
Dimensions W x L x H
30 mm x 170 mm x 35 mm
Communication interface, connection technology
M8x1, D-coded as per EN 61076-2-114
Communication interface, connection type
2x socket
Intrinsic current consumption at nominal operating voltage for electronics/sensors
Typically 55 mA
Permissible voltage fluctuations load
± 25 %
Voltage forwarding, number of pins/wires
4
Power failure buffering
10 ms
Electrical connection, IO-Link®, connection technology
M12x1, A-coded as per EN 61076-2-101
Reverse polarity protection
yes
Certification
RCM compliance mark
IO-Link®, communication mode
Configurable via software SIO, COM1 (4.8 kBd), COM2 (38.4 kBd), COM3 (230.4 kBd)
IO-Link®, minimum cycle time
Depends on minimally supported cycle time of connected IO-Link® device
Communication interface, function
System communication XF10 IN / XF20 OUT
Communication interface, shielding
yes
Note regarding operating voltage
SELV/PELV fixed power supplies required Note voltage drop
Type code
CPX-AP-I
CE marking (see declaration of conformity)
As per EU EMC directive
Storage temperature
-40 °C ... 70 °C
Product weight
126 g
IO-Link®, process data width OUT
8–128 bytes parameterizable
Electrical IO-Link® connection, connection type
4x socket
Electrical IO-Link® connection, number of pins/wires
5
IO-Link®, protocol version
Master V 1.1
IO-Link®, number of ports
4
Note on materials
RoHS-compliant

8086604 Related Documents