8118278 Festo Electric Actuators

Product Details

• Shock resistance
  Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
• Input switching logic
  NPN (negative switching) PNP (positive switching)
• Characteristics of logic input
  Configurable Not galvanically isolated
• Power supply, connection pattern
  00995989
• Logic interface, connection technology
  M12x1, A-coded as per EN 61076-2-101
• Number of digital logic outputs 24 V DC
  2
• Power supply, number of pins/wires
  4
• Nominal current
  3 A
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, number of ports
  1
• Piston rod thread
  M10x1.25
• Vibration resistance
  Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Logic interface, connection type
  Plug
• DC nominal voltage
  24 V
• Product weight
  2005 g
• IO-Link®, port class
  A
• IO-Link®, minimum cycle time
  1 ms
• Display
  LED
• Logic input specification
  Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Characteristics of digital logic outputs
Configurable Not galvanically isolated
Number of digital logic inputs
2
Work range of logic input
24 V
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, communication mode
COM3 (230.4 kBd)
Reversing backlash
100 µm
Screw diameter
10 mm
KC characters
KC EMC
Ready status indication
LED
Logic interface, connection pattern
00992264
Power supply, type of connection
Plug
Logic interface, number of poles/wires
8
Rotor position sensor resolution
16 bit
IO-Link®, process data width IN
2 Byte
IO-Link®, process data content OUT
1 bit (move in) 1 bit (quit error)
Stroke
200 mm
Type code
EPCS
Mounting position
Any
Protection against torsion/guide
With plain-bearing guide
Rotor position sensor measuring principle
Magnetic
Max. acceleration
1.5 m/s²
Max. cable length
15 m outputs 20 m for IO-Link® operation
Parameterization interface
IO-Link® User interface
Power supply, connection technology
M12x1, T-coded as per EN 61076-2-111
Max. current of digital logic outputs
100 mA
Max. current consumption
3000 mA
IO-Link®, SIO mode support
Yes
IO-Link®, protocol version
Device V 1.1
Size
45
Spindle pitch
3 mm/U
Piston rod end
External thread
Homing
Fixed stop block positive Reference switch
Max. speed
0.074 m/s
Ambient temperature
0 °C ... 50 °C
Guide value for payload, vertical
23 kg
Basic weight with 0 mm stroke
1185 g
IO-Link®, data memory required
500 byte
Stroke reserve
0 mm
Max. angle of rotation of the piston rod +/-
1 deg
Design
Electric actuator With integrated drive
Duty cycle
100%
Insulation protection class
B
Relative air humidity
0 - 90 % Non-condensing
Max. torque Mz
2.9 Nm
Moving mass at 0 mm stroke
179 g
Type of mounting
With internal thread With accessories
Spindle nut material
Steel
Motor type
Stepper motor
Symbol
00997294
Repetition accuracy
±0.02 mm
Permissible voltage fluctuations
+/- 15 %
Storage temperature
-20 °C ... 60 °C
Max. torque My
2.9 Nm
Max. feed force Fx
450 N
Piston rod material
High-alloy stainless steel
Spindle material
Roller bearing steel
Spindle type
Ball screw drive
Rotor position sensor
Absolute encoder, single-turn
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Certification
RCM compliance mark
Guide value for payload, horizontal
60 kg
Additional moving mass per 10 mm stroke
4.9 g
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Corrosion resistance class (CRC)
0 - No corrosion stress
Degree of protection
IP40
Max. radial force on actuator shaft
180 N
Max. torque Mx
0 Nm
Additional weight per 10 mm stroke
41 g
Housing material
Wrought aluminum alloy, smooth-anodized

8118278 Related Documents