8118282 Festo Electric Actuators

Product Details

• Power supply, connection technology
  M12x1, T-coded as per EN 61076-2-111
• Number of digital logic inputs
  2
• IO-Link®, SIO mode support
  Yes
• IO-Link®, process data width OUT
  2 Byte
• IO-Link®, process data content OUT
  1 bit (move in) 1 bit (quit error)
• Stroke
  100 mm
• Mounting position
  Any
• Protection against torsion/guide
  With plain-bearing guide
• Corrosion resistance class (CRC)
  0 - No corrosion stress
• Max. torque My
  2.9 Nm
• Basic weight with 0 mm stroke
  1185 g
• Housing material
  Wrought aluminum alloy, smooth-anodized
• KC characters
  KC EMC
• Display
  LED
• Ready status indication
  LED
• Switching logic at outputs
  NPN (negative switching) PNP (positive switching)
• Characteristics of digital logic outputs
  Configurable Not galvanically isolated
• DC nominal voltage
  24 V
• Work range of logic input
  24 V
• Nominal current
  3 A
IO-Link®, process data width IN
2 Byte
IO-Link®, number of ports
1
Reversing backlash
100 µm
Motor type
Stepper motor
Rotor position sensor measuring principle
Magnetic
Duty cycle
100%
Ambient temperature
0 °C ... 50 °C
Shock resistance
Shock test with severity level 1 as per FN 942017-5 and EN 60068-2-27
Vibration resistance
Transport application test with severity level 1 as per FN 942017-4 and EN 60068-2-6
Input switching logic
NPN (negative switching) PNP (positive switching)
Characteristics of logic input
Configurable Not galvanically isolated
Logic interface, connection pattern
00992264
Max. current of digital logic outputs
100 mA
Logic interface, number of poles/wires
8
Product weight
1595 g
IO-Link®, service data contents IN
32 bit force 32 bit speed
IO-Link®, minimum cycle time
1 ms
Logic input specification
Based on IEC 61131-2, type 1
Additional functions
User interface Integrated end-position sensing
Power supply, connection pattern
00995989
Power supply, type of connection
Plug
Logic interface, connection technology
M12x1, A-coded as per EN 61076-2-101
Number of digital logic outputs 24 V DC
2
Rotor position sensor resolution
16 bit
IO-Link®, process data content IN
1 bit (state device) 1 bit (state out)
IO-Link®, protocol version
Device V 1.1
IO-Link®, data memory required
500 byte
Screw diameter
10 mm
Max. angle of rotation of the piston rod +/-
1 deg
Design
Electric actuator With integrated drive
Max. cable length
15 m outputs 20 m for IO-Link® operation
Parameterization interface
IO-Link® User interface
Note on ambient temperature
Above an ambient temperature of 30°C, the power must be reduced by 2% per K.
Logic interface, connection type
Plug
Power supply, number of pins/wires
4
Max. current consumption
3000 mA
IO-Link®, port class
A
Size
45
Stroke reserve
0 mm
Type code
EPCS
Spindle type
Ball screw drive
Symbol
00997294
Repetition accuracy
±0.02 mm
CE marking (see declaration of conformity)
As per EU EMC directive As per EU RoHS directive
Degree of protection
IP40
Max. feed force Fx
250 N
Guide value for payload, vertical
13 kg
Note on materials
Contains paint-wetting impairment substances RoHS-compliant
Piston rod material
High-alloy stainless steel
IO-Link®, communication mode
COM3 (230.4 kBd)
Piston rod thread
M10x1.25
Spindle pitch
10 mm/U
Piston rod end
External thread
Homing
Fixed stop block positive Reference switch
Max. acceleration
5 m/s²
Permissible voltage fluctuations
+/- 15 %
Storage temperature
-20 °C ... 60 °C
Max. torque Mx
0 Nm
Max. torque Mz
2.9 Nm
Additional weight per 10 mm stroke
41 g
Type of mounting
With internal thread With accessories
Rotor position sensor
Absolute encoder, single-turn
Max. speed
0.23 m/s
Insulation protection class
B
Relative air humidity
0 - 90 % Non-condensing
Certification
RCM compliance mark
Guide value for payload, horizontal
40 kg
Moving mass at 0 mm stroke
179 g
Spindle nut material
Steel
Max. radial force on actuator shaft
180 N
Additional moving mass per 10 mm stroke
4.9 g
Spindle material
Roller bearing steel

8118282 Related Documents