Powermatic Associates Logo

85.02.0.012.0000 Finder Industrial Automation Components

85.02.0.012.0000 on Powermatic Associates
Finder

Part#:85.02.0.012.0000

Manufacturer:Finder

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Finder 85.02.0.012.0000 is a timer with 2C/O or DPDT (Double Pole Double Throw) contacts, designed for plug-in mounting. It operates with a control voltage of 12Vdc and can also function with 12Vac at 50Hz/60Hz. This timer supports a supply voltage range from -20 to +60°C ambient air temperature, ensuring operation within a wide range of environmental conditions. It offers a degree of protection rated at IP40. The electrical durability of this part is rated for 200,000 operations with load, and its contacts are coated with AgNi (Silver Nickel) for enhanced performance. The timer provides a versatile range of time delays, including 0.05s to 1s, 0.5s to 10s, 5s to 100s, 0.5min to 10min, 5min to 100min, 0.5h to 10h, and 5h to 100h, accommodating a broad spectrum of timing requirements.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Finder Industrial Automation Components

58.33.9.024.0050SPA on Powermatic Associates

58.33.9.024.0050SPA

Finder

Finder 58.33.9.024.0050SPA is a relay with a box-clamp connection type, designed to handle rated currents of 10A at 250Vac (AC-1), 10A at 30Vdc (DC-1), 0.25A at 110Vdc (DC-1), and 0.12A at 220Vdc (DC-1) with normally open (NO) auxiliary contacts. It operates with a supply voltage of 3C/O / 3PDT (3 Pole Double Throw), capable of handling ambient air temperatures for operation and storage of -40 to +70 degrees Celsius. The relay supports a communication protocol of type C, with a control voltage (AC) of 3.6 kV and is designed for mounting on a DIN rail or as a plug-in unit. It features a protection function with a rated voltage of 250Vac, a rated active power of 3 poles, and includes a diode coil EMC surge suppressor module. The contact material is AgNi (Silver Nickel), and it has a cross-section suitable for various applications.

10 in stock
34.51.7.024.5010 on Powermatic Associates

34.51.7.024.5010

Finder

Finder 34.51.7.024.5010 is a relay with a solder pin connection type, designed for a variety of applications. It has a rated current of 6A at 250Vac (AC-1), 3A at 30Vdc, 0.2A at 110Vdc, and 0.12A at 220Vdc for DC-1 operations. The relay features normally open (NO) auxiliary contacts and is suitable for use with a supply voltage of 1C/O / SPDT (Single Pole Double Throw). It operates within an ambient air temperature range of -40 to +85 degrees Celsius and has a control voltage (AC) of 6 kV. The rated active power is specified for 1 Pole(s), with a net width of 24Vdc. It offers protection functions at 250Vac and has a response time of 0.17 W. The relay is capable of 60,000 operations and is constructed with AgNi+Au (gold-plated silver-nickel) contacts, ensuring compatibility with PCB and plug-in mounting.

11 in stock
94.02SMA on Powermatic Associates

94.02SMA

Finder

Finder 94.02SMA is a socket designed for DIN rail or panel mounting, featuring a box-clamp connection type. It is rated for a current of 10A and has a protection rating of IP20. The control voltage specification adheres to AC standards, and it is characterized by a blue power consumption indicator.

8 in stock
96.04 on Powermatic Associates

96.04

Finder

DIN -Rail/Panel mount screw terminal (Box Clamp) socket for 56.34 relay (blue)

8 in stock
95.01 on Powermatic Associates

95.01

Finder

RETAINING CLIP FOR RELAYS

273 in stock
94.02 on Powermatic Associates

94.02

Finder

DIN -Rail/Panel mount screw terminal (Box Clamp) socket for 55.32 relay (blue)

1 in stock

Manufacturer warranty

85.02.0.012.0000 Finder

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Finder

Powermatic Associates is an authorized Finder distributor, proudly bringing you a diverse range of innovative products from this leading manufacturer renowned for its excellence in industrial automation and control solutions. With over 65 years of experience, Finder specializes in the design and production of high-quality electromechanical and electronic components tailored to meet diverse industr...

Recently viewed products

MFI1FRL17N4 on Powermatic Associates

MFI1FRL17N4

Novanta IMS

Novanta IMS MFI1FRL17N4 is a stepper motor controller within the Stepper motor controllers sub-range, designed under the MicroDrive series. It operates with a supply voltage range of 12Vdc to 48Vdc, nominally at 24Vdc, and supports a rated current of 3A. This controller is equipped for DC stepper motor drive functions and features an ambient air temperature for operation between 0 and +65 °C. For connectivity, it includes 30cm / 12" bare end flying leads, a 10-pin wire crimp connector, and a 4-pin wire crimp connector. Communication with the controller is facilitated through RS-422 and RS-485 protocols. It also offers 4 x digital outputs (sinking; NPN) and 4 x digital inputs (sourcing; NPN). The device is designed to be stored in conditions ranging from -25 to +70 °C ambient air temperature.

0 in stock
MDI4MRQ34C1-EQ on Powermatic Associates

MDI4MRQ34C1-EQ

Novanta IMS

Novanta IMS MDI4MRQ34C1-EQ is a stepper motor designed with an integrated driver and a 2-phase AC stepper motor configuration. It features an external single-end 512-line optical encoder and is built with a triple (3) motor stack, Plus 2 version for expanded features. This motor offers connectivity through a 19-pin M23 male connector and a 5-pin M12 female connector, supporting RS-422 and RS-485 communication protocols. It operates on a supply voltage of 120Vac and is mounted via an 85x85mm flange. The MDI4MRQ34C1-EQ is designed to function within an ambient air temperature range of 0 to +85°C and is protected to a degree of IP65. It has a moment of inertia of 3.4kg.cm^2 and provides a stall torque of 529N.cm, with a resolution characterized by a 1.8° step angle.

0 in stock

Relevant products

FAQ

Out if stock but available for backorder.

Finder 85.02.0.012.0000 is a timer with 2C/O or DPDT (Double Pole Double Throw) contacts, designed for plug-in mounting. It operates with a control voltage of 12Vdc and can also function with 12Vac at 50Hz/60Hz. This timer supports a supply voltage range from -20 to +60°C ambient air temperature, ensuring operation within a wide range of environmental conditions. It offers a degree of protection rated at IP40. The electrical durability of this part is rated for 200,000 operations with load, and its contacts are coated with AgNi (Silver Nickel) for enhanced performance. The timer provides a versatile range of time delays, including 0.05s to 1s, 0.5s to 10s, 5s to 100s, 0.5min to 10min, 5min to 100min, 0.5h to 10h, and 5h to 100h, accommodating a broad spectrum of timing requirements.

Similar products from: Industrial Automation Components

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock