UIA-0800N

Unitronics

UIA-0800N Unitronics - UniStream™ I/O: 8 analog inputs (not isolated)

0 in stock

Q12AB6FF50Q5-19385

Banner

Q12 AB6FF50Q5-19385, 533 mm (21 in) 4-pin M12 Pigtail QD

0 in stock

EZM31600JCBC

Schneider Electric

Square D by Schneider Electric EZM31600JCBC is a meter center main unit designed for surface mounting. It features a steel enclosure and aluminium/copper busbars, ensuring compatibility with various installation requirements. This unit is protected to a NEMA 3R degree, making it suitable for both indoor and rainproof applications. With dimensions of H1745mm x W767mm x D466mm (H68.7" x W30.19" x D18.33"), it supports a rated voltage of 208Y/120Vac and 240/120Vac (Delta) across a three-phase (3PH-4W) network. The EZM31600JCBC is pre-equipped with an incoming breaker, offering a main rated current of 1600A and a busbar rated current of 1200A. It accommodates a wide range of cross-sections for aluminium/copper lugs, including 1 x 6AWG...300kcmil for ground and multiple configurations for line and neutral connections, specifically 6 x 1/0AWG...750kcmil, 12 x 1/0AWG...250kcmil for both line and neutral.

0 in stock

ATV212HD75N4

Schneider Electric

Schneider Electric ATV212HD75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series, designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C2 / class C3) and a built-in heatsink. The supply voltage ranges from 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. This model has dimensions of H605mm x W320mm x D290mm and offers an IP21 UL type 1 degree of protection. It is rated for a current of 160A at 480Vac (75kW) and can handle a maximum current of 111.3A for 60 seconds. Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Metasys N2, Apogee FLN, and BACnet, supporting a 3-phase network with an output frequency range of 0.5-200 Hz. It provides 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), and 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), along with 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 141.8A at 380Vac and 111.3A at 480Vac, with a rated active power of 75kW (100HP) and power dissipation/losses of 1945 W.

0 in stock

ATV340D11N4E

Schneider Electric

Schneider Electric ATV340D11N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless voltage vector control, current vector control with sensor, and Master/Slave daisy chain through PTO/PTI for MachineStruxure integration in SoMachine. It operates in velocity mode and torque control, offering 220% Tn in open or closed loop control, dynamic motor control performance (up to 400Hz speed bandwidth), and cyclic application task (1ms) with an energy-saving mode. The design includes a built-in EMC filter (class C3) and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm and an IP20 degree of protection. The rated current is 32A (normal-duty; 4kHz), 24A (heavy-duty; 4kHz), with a maximum current of 43A (normal-duty; for 2s), 43A (heavy-duty; for 2s), and 35.2A (normal-duty; for 60s), 36A (heavy-duty; for 60s). It supports cabinet mounting, Ethernet/IP, Modbus TCP communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 x analog output, 5 x digital inputs, 2 x digital outputs programmable as inputs or outputs, 1 x digital output (C/O SPDT relay contact), 1 x digital output (NO relay contact), and 2 x analog inputs. The current consumption is 34A (380Vac; normal-duty), 27.3A (480Vac; normal-duty), 34.7A (380Vac; heavy-duty), 27.7A (480Vac; heavy-duty), with a rated active power of 15kW (normal-duty), 11kW (heavy-duty), and rated power of 20HP (normal-duty), 15HP (heavy-duty).

0 in stock

RSM RKM 5723-11.5M

Turck

RSM RKM 5723-11.5M Turck - RSM RKM 5723-11.5M DeviceNet™ Cordset, Extension Cordset

0 in stock

221-2401

WAGO

221-2401 WAGO - Inline splicing connector with lever; for all conductor types; 12 AWG (max.); 2-conductor; transparent housing; white cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent

3569 in stock

USC-C3-T20

Unitronics

USC-C3-T20 Unitronics - Cloud Built-In - Basic - 10 digital inputs, 2 analog/digital inputs, 8 transistor outputs - PLC only

0 in stock

UIA-0800N

Unitronics

UIA-0800N Unitronics - UniStream™ I/O: 8 analog inputs (not isolated)

0 in stock

Q12AB6FF50Q5-19385

Banner

Q12 AB6FF50Q5-19385, 533 mm (21 in) 4-pin M12 Pigtail QD

0 in stock

EZM31600JCBC

Schneider Electric

Square D by Schneider Electric EZM31600JCBC is a meter center main unit designed for surface mounting. It features a steel enclosure and aluminium/copper busbars, ensuring compatibility with various installation requirements. This unit is protected to a NEMA 3R degree, making it suitable for both indoor and rainproof applications. With dimensions of H1745mm x W767mm x D466mm (H68.7" x W30.19" x D18.33"), it supports a rated voltage of 208Y/120Vac and 240/120Vac (Delta) across a three-phase (3PH-4W) network. The EZM31600JCBC is pre-equipped with an incoming breaker, offering a main rated current of 1600A and a busbar rated current of 1200A. It accommodates a wide range of cross-sections for aluminium/copper lugs, including 1 x 6AWG...300kcmil for ground and multiple configurations for line and neutral connections, specifically 6 x 1/0AWG...750kcmil, 12 x 1/0AWG...250kcmil for both line and neutral.

0 in stock

ATV212HD75N4

Schneider Electric

Schneider Electric ATV212HD75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series, designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C2 / class C3) and a built-in heatsink. The supply voltage ranges from 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. This model has dimensions of H605mm x W320mm x D290mm and offers an IP21 UL type 1 degree of protection. It is rated for a current of 160A at 480Vac (75kW) and can handle a maximum current of 111.3A for 60 seconds. Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Metasys N2, Apogee FLN, and BACnet, supporting a 3-phase network with an output frequency range of 0.5-200 Hz. It provides 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), and 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), along with 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 141.8A at 380Vac and 111.3A at 480Vac, with a rated active power of 75kW (100HP) and power dissipation/losses of 1945 W.

0 in stock

ATV340D11N4E

Schneider Electric

Schneider Electric ATV340D11N4E is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar Machine 340 series. It features Safe Torque Off up to SIL3 / PLe with dual input, 5 points U/F, sensorless voltage vector control, current vector control with sensor, and Master/Slave daisy chain through PTO/PTI for MachineStruxure integration in SoMachine. It operates in velocity mode and torque control, offering 220% Tn in open or closed loop control, dynamic motor control performance (up to 400Hz speed bandwidth), and cyclic application task (1ms) with an energy-saving mode. The design includes a built-in EMC filter (class C3) and a built-in heatsink. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H385mm x W180mm x D249mm and an IP20 degree of protection. The rated current is 32A (normal-duty; 4kHz), 24A (heavy-duty; 4kHz), with a maximum current of 43A (normal-duty; for 2s), 43A (heavy-duty; for 2s), and 35.2A (normal-duty; for 60s), 36A (heavy-duty; for 60s). It supports cabinet mounting, Ethernet/IP, Modbus TCP communication protocols, operates on a 3-phase network with an output frequency of 1-599 Hz, and includes 1 x analog output, 5 x digital inputs, 2 x digital outputs programmable as inputs or outputs, 1 x digital output (C/O SPDT relay contact), 1 x digital output (NO relay contact), and 2 x analog inputs. The current consumption is 34A (380Vac; normal-duty), 27.3A (480Vac; normal-duty), 34.7A (380Vac; heavy-duty), 27.7A (480Vac; heavy-duty), with a rated active power of 15kW (normal-duty), 11kW (heavy-duty), and rated power of 20HP (normal-duty), 15HP (heavy-duty).

0 in stock

RSM RKM 5723-11.5M

Turck

RSM RKM 5723-11.5M Turck - RSM RKM 5723-11.5M DeviceNet™ Cordset, Extension Cordset

0 in stock

221-2401

WAGO

221-2401 WAGO - Inline splicing connector with lever; for all conductor types; 12 AWG (max.); 2-conductor; transparent housing; white cover; Surrounding air temperature: max 85°C (T85); 4,00 mm²; transparent

3569 in stock

USC-C3-T20

Unitronics

USC-C3-T20 Unitronics - Cloud Built-In - Basic - 10 digital inputs, 2 analog/digital inputs, 8 transistor outputs - PLC only

0 in stock

UIA-0800N

Unitronics

UIA-0800N Unitronics - UniStream™ I/O: 8 analog inputs (not isolated)

0 in stock

Q12AB6FF50Q5-19385

Banner

Q12 AB6FF50Q5-19385, 533 mm (21 in) 4-pin M12 Pigtail QD

0 in stock

EZM31600JCBC

Schneider Electric

Square D by Schneider Electric EZM31600JCBC is a meter center main unit designed for surface mounting. It features a steel enclosure and aluminium/copper busbars, ensuring compatibility with various installation requirements. This unit is protected to a NEMA 3R degree, making it suitable for both indoor and rainproof applications. With dimensions of H1745mm x W767mm x D466mm (H68.7" x W30.19" x D18.33"), it supports a rated voltage of 208Y/120Vac and 240/120Vac (Delta) across a three-phase (3PH-4W) network. The EZM31600JCBC is pre-equipped with an incoming breaker, offering a main rated current of 1600A and a busbar rated current of 1200A. It accommodates a wide range of cross-sections for aluminium/copper lugs, including 1 x 6AWG...300kcmil for ground and multiple configurations for line and neutral connections, specifically 6 x 1/0AWG...750kcmil, 12 x 1/0AWG...250kcmil for both line and neutral.

0 in stock

ATV212HD75N4

Schneider Electric

Schneider Electric ATV212HD75N4 is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series, designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C2 / class C3) and a built-in heatsink. The supply voltage ranges from 323-528Vac, supporting 380Vac, 400Vac, 480Vac, and 500Vac nominal voltages. This model has dimensions of H605mm x W320mm x D290mm and offers an IP21 UL type 1 degree of protection. It is rated for a current of 160A at 480Vac (75kW) and can handle a maximum current of 111.3A for 60 seconds. Wall mounting is the prescribed mounting mode. Communication protocols include Modbus, Metasys N2, Apogee FLN, and BACnet, supporting a 3-phase network with an output frequency range of 0.5-200 Hz. It provides 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), and 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), along with 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 141.8A at 380Vac and 111.3A at 480Vac, with a rated active power of 75kW (100HP) and power dissipation/losses of 1945 W.

0 in stock