Powermatic Associates Logo

2903330 Phoenix Contact Control Relays

2903330 on Powermatic Associates
Phoenix Contact

Part#:2903330

Manufacturer:Phoenix Contact

Category:Control Relays

Product Lifecycle:Active

Only 2 left in stock. Order Now!

Sep 27, 2026

Product description

Pre-assembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 24 V DCRelay base RIF-1..

Product Details

  • Width
    16 mm
  • Nominal input voltage UN
    24 V DC
  • Typical response time
    8 ms
  • Operating voltage display
    Yellow LED
  • Contact type
    2 changeover contacts
  • Maximum inrush current
    50 mA
  • Switching capacity
    2 A (at 24 V, DC13)
  • Mounting position
    any
  • Connection method
    Push-in connection
  • UNSPSC 6.01
    30211916
  • UNSPSC 20.0
    39122334
  • Height
    93 mm
  • Degree of protection
    IP20 (Relay base)
  • Typical release time
    10 ms
  • Power dissipation for nominal condition
    0.43 W
  • Minimum switching voltage
    5 V (at 10 mA)
  • Note
    the following values are applicable if a gold layer is destroyed
  • Ambient temperature (storage/transport)
    -40 °C ... 85 °C
  • Typical input current at UN
    18 mA
  • Protective circuit
    Damping diode
  • Maximum switching voltage
    250 V AC/DC
  • Limiting continuous current
    25 A (20 ms, N/O contacts)
  • Mechanical service life
    approx. 3x 107 cycles
  • Connection name
    Contact side
  • Conductor cross section AWG
    26 ... 16 (solid)
  • Rated surge voltage
    6 kV
  • Designation
    Corrosive gas test
  • China RoHS
    Environmentally Friendly Use Period = 50 years
  • ECLASS 4.1
    27371100
  • ECLASS 6.0
    27371600
  • ECLASS 5.1
    27371600
  • ECLASS 9.0
    27371601
  • ETIM 7.0
    EC001437
  • UNSPSC 7.0901
    39121515
  • UNSPSC 13.2
    39122334
  • UNSPSC 21.0
    39122334
  • Utilization restriction
    EMC: class A product, see manufacturer's declaration in the download area
  • Depth
    75 mm
  • Input voltage range in reference to UN
    see diagram
  • Coil voltage
    24 V DC
  • Contact material
    AgNi
  • Type of switch contact
    Single contact
  • Test voltage
    4 kVrms (50 Hz, 1 min., winding/contact)
  • Flammability rating according to UL 94
    V2 (Housing)
  • Assembly instructions
    In rows with zero spacing
  • Conductor cross section solid
    0.14 mm² ... 1.5 mm²
  • Standards/regulations
    DIN EN 50178
  • Pollution degree
    2
  • Identification
    ISA-S71.04. G3 Harsh Group
  • ECLASS 10.0.1
    27371601
  • ECLASS 4.0
    27371100
  • ETIM 2.0
    EC001437
  • ETIM 4.0
    EC001437
  • UNSPSC 11
    39121515
  • UNSPSC 19.0
    39122334
  • Type of note
    Notes on operation
  • Ambient temperature (operation)
    -40 °C ... 70 °C
  • Min. switching current
    10 mA (At 5 V)
  • Interrupting rating (ohmic load) max.
    192 W (at 24 V DC)
  • Operating mode
    100% operating factor
  • Service life, electrical
    see diagram
  • Stripping length
    8 mm
  • Conductor cross section flexible
    0.14 mm² ... 1.5 mm²
  • Overvoltage category
    III
  • Insulation
    Safe isolation, basic insulation, and 4 kV rated surge voltage between all changeover contacts.
  • ECLASS 11.0
    27371601
  • ECLASS 5.0
    27371600
  • ECLASS 7.0
    27371601
  • ETIM 3.0
    EC001437
  • ETIM 6.0
    EC001437
  • UNSPSC 12.01
    39121515
  • UNSPSC 18.0
    39122334

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Phoenix Contact Control Relays

3030349 on Powermatic Associates

3030349

Phoenix Contact

Plug-in bridge, pitch: 6.2 mm, width: 29.3 mm, number of positions: 5, color: red

138 in stock
2966634 on Powermatic Associates

2966634

Phoenix Contact

PLC-INTERFACE, consisting of PLC-BSC.../21 basic terminal block with screw connection and plug-in miniature solid-state relay, for mounting on DIN rail NS 35/7,5, 1 N/O contact, input: 24 V DC, output: 3 - 33 V DC/3 A

13 in stock
2966016 on Powermatic Associates

2966016

Phoenix Contact

6.2 mm PLC basic terminal block with screw connection, without relay or solid-state relay, for mounting on DIN rail NS 35/7,5, 1 changeover contact, input voltage 24 V DC

10 in stock
2903308 on Powermatic Associates

2903308

Phoenix Contact

Pre-assembled relay modules with Push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 4 changeover contacts. Input voltage: 24 V DCRelay base RIF-2..., for industrial relay with 2 or 4 changeover contact

5 in stock
2910140 on Powermatic Associates

2910140

Phoenix Contact

Multi-function timer relay with 4 functions in an ultra-narrow design, adjustable time range (0.1 s - 300 min), 1 changeover contact, screw connection

11 in stock
3030271 on Powermatic Associates

3030271

Phoenix Contact

Plug-in bridge, pitch: 6.2 mm, width: 60.3 mm, number of positions: 10, color: red

14 in stock

Manufacturer warranty

2903330 Phoenix Contact

Get a quick Quote!

Request a quote, and we will send you price within minutes.

Stock:

2

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

Compare 2903330 with other Control Relays products

Width

Nominal input voltage UN

Typical response time

Operating voltage display

Contact type

Maximum inrush current

Switching capacity

Mounting position

Connection method

UNSPSC 6.01

Selected product

2903330
2 in stock
2903330
Phoenix Contact

Pre-assembled relay module with Push-in connection, consisting of: relay base, multi-layer contact r...

Width16 mm

Nominal input voltage UN24 V DC

Typical response time8 ms

Operating voltage displayYellow LED

Contact type2 changeover contacts

Maximum inrush current50 mA

Switching capacity2 A (at 24 V, DC13)

Mounting positionany

Connection methodPush-in connection

UNSPSC 6.0130211916

2903308
5 in stock
2903308
Phoenix Contact

Pre-assembled relay modules with Push-in connection, consisting of: relay base, power contact relay,...

Width31 mm

Nominal input voltage UN24 V DC

Typical response time-

Operating voltage display-

Contact type-

Maximum inrush current-

Switching capacity-

Mounting position-

Connection method-

UNSPSC 6.01-

2966171
40 in stock
2966171
Phoenix Contact

PLC-INTERFACE, consisting of basic terminal block PLC-BSC.../21 with screw connection and plug-in mi...

Width6.2 mm

Nominal input voltage UN24 V DC

Typical response time-

Operating voltage display-

Contact type-

Maximum inrush current-

Switching capacity-

Mounting position-

Connection method-

UNSPSC 6.01-

About the manufacturer

Phoenix Contact

Powermatic Associates is an authorized Phoenix Contact distributor, proudly offering a wide array of innovative industrial solutions that cater to modern technological demands. Phoenix Contact is a global leader renowned for its high-quality products in the fields of electrical engineering and automation technology. Their extensive catalog encompasses everything from connection technology, interfa...

Recently viewed products

GV2ME07 on Powermatic Associates

GV2ME07

Schneider Electric

Schneider Electric GV2ME07 is a Motor Protection Circuit Breaker (MPCB) within the GV2ME sub-range, designed for thermal-magnetic motor protection and manual motor starting. It features 3 poles and provides protection functions against short-circuit and thermal overload. The rated current for this device is between 1.6 and 2.5 A, with a rated insulation voltage (Ui) of 690 V. It is designed for DIN rail mounting and has a net width of 45 mm. The operating mode is via a push-button, with protection settings for short-circuit pickup current fixed at 33.5A. The GV2ME07 has a rated impulse voltage (Uimp) of 6 kV and supports rated active power of 0.75 kW at 400/415Vac, 1.1 kW at 500Vac, and 1.5 kW at 690Vac. Its trip current rating is 2.5 AT, with a frame current rating of 32 AF. The mechanical durability of the device is rated at 100,000 operations at no load, and its electrical durability is rated at 100,000 operations with load (440Vac; AC-3; In/2). Connection to the circuit is made through screw-clamp terminals. The rated voltage (AC) phase-to-phase is 690 V, with all three poles protected. The minimum and maximum currents are 1.6 A and 2.5 A, respectively, and the trip unit type is thermal-magnetic. It is categorized under utilization category A AC-3.

0 in stock

Relevant products

FAQ

2 in stock

Pre-assembled relay module with Push-in connection, consisting of: relay base, multi-layer contact relay, plug-in display/interference suppression module, and retaining bracket. Contact type: 2 changeover contacts. Input voltage: 24 V DCRelay base RIF-1..

Similar products from: Control Relays

This item can ship within 24h!

40.52.7.024.0000 on Powermatic Associates

40.52.7.024.0000

Verified stock: 7

Finder 40.52.7.024.0000 is a relay with solder pin connection type, designed for a rated current of 8A at 250Vac (AC-1) and 8A at 30Vdc (DC-1), with lower current ratings of 0.6A at 110Vdc and 0.25A at 220Vdc for Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is suitable for ambient air temperatures ranging from -40 to +85 degrees Celsius for both operation and storage. This relay has a rated voltage of 250Vac, a control voltage of 6 kV, and is designed for PCB or plug-in mounting. It features a net width of 29 mm, a net depth of 25 mm, and a power consumption of 0.5 W. The visual position indicator has a 5.3mm pins pitch, and the relay is capable of 100,000 operations for Normally Closed (NC) circuits and 10,000,000 operations overall. The relay's poles are rated for 24Vdc, with a protection function of 250Vac, and it has a response time of 0.5 W.

Finder

This item can ship within 24h!

55.32.8.024.0040 on Powermatic Associates

55.32.8.024.0040

Verified stock: 10

Finder 55.32.8.024.0040 is a relay with solder pin connection type, designed for a rated current of 10A at 250Vac (AC-1), 10A at 30Vdc (DC-1), 0.25A at 110Vdc (DC-1), and 0.12A at 220Vdc (DC-1) with Normally Open (NO) auxiliary contacts. It operates with a supply voltage of 2C/O / DPDT (Double Pole Double Throw), and is capable of handling ambient air temperatures for operation and storage of -40 to +85 degrees Celsius. The relay has a rated voltage for AC operations, a communication protocol of type C, and includes protection functions at 250Vac. Its dimensions are specified with a net depth of 37.2 mm, a mounting mode width of 27.7 mm, and a power consumption length of 20.7 mm. The control voltage (AC) is rated at 4 kV, and it supports a rated active power of 2 poles. The relay is designed for plug-in mounting, has a color code of 24Vac (50Hz/60Hz), and is capable of 200,000 operations for Normally Closed (NC) circuits, with a durability of 20,000,000 operations. The contact material is AgNi (Silver Nickel).

Finder

What can I help you find today?

Recommended parts

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

1 in stock