PILZ-774435 Pilz Electrical Safety Devices

Out if stock but available for backorder.

Pilz PILZ-774435 is a safety relay designed for dual-channel safety relay operations with two-hand monitoring type III C. It features DIN rail mounting and operates within an ambient air temperature range of -25 to +55°C. The device has a net height of 87 mm, a width of 45 mm, and a depth of 121 mm. It is rated for safety output contacts at 5A for both 24Vdc (DC-1) and 240Vac (AC-1), 1.5A at 24Vdc (DC-13), and 2.5A at 230Vac (AC-15). The connection type is fixed screw terminals. The supply voltage for AC is specified at 93.5-121Vac (110Vac nominal) under the sub-range name P2HZ X1. The degree of protection is IP40, with the housing made of PPO and the front housing of ABS. Power consumption is rated at 6 VA. The operating mode supports dual-channel operation with detection of shorts across contacts, redundant input circuit for detecting earth faults in the start and input circuit, short circuits in the input circuit, and shorts across contacts in the input circuit. It has 3 x instantaneous safety outputs (3NO / 3xSPST-NO each made of 2 N.O. contacts in series; 5A 24Vdc DC-1 or 240Vac AC-1 resistive load) and 1 x instantaneous auxiliary output (1NC / SPST-NC made of 2 N.C. contacts in parallel), plus 2 x instantaneous auxiliary outputs (semiconductor outputs (2SO); 24Vdc; 20mA). The protection functions include detection of shorts across contacts. It also features 2 x digital inputs (24Vdc; 45mA) and 1 x feedback loop input.