Powermatic Associates Logo

ATV212WD22N4C Schneider Electric Industrial Automation Components

ATV212WD22N4C on Powermatic Associates
Schneider Electric

Part#:ATV212WD22N4C

Manufacturer:Schneider Electric

Category:Industrial Automation Components

Product Lifecycle:Active

Product description

Schneider Electric ATV212WD22N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C1) within an enclosed assembly and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). The dimensions are H720mm x W284mm x D315mm, and it has a degree of protection of IP55 UL type 1. The rated current is 43.5A (460Vac; 8kHz) with a maximum current of 47.9A for 60 seconds. It supports wall mounting and uses the Modbus, Metasys N2, Apogee FLN, and BACnet communication protocols. This 3-phase network device outputs frequencies from 0.5-200 Hz and includes 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), and 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 41.1A at 380Vac and 33.1A at 480Vac, with a rated active power of 22kW and rated power of 30HP.

Product condition

New Factory Sealed

New Factory Sealed - New condition, never used, original OEM part with original packaging and factory seal.

Similar products from: Schneider Electric Industrial Automation Components

LC1D95M7 on Powermatic Associates

LC1D95M7

Schneider Electric

Schneider Electric LC1D95M7 is a magnetic contactor from the Deca sub-range, featuring screw connections and three poles (3P; 3NO). It has a rated current of 125A (AC-1) and 95A (440Vac; AC-3), with a mounting mode designed for DIN rail installation. The net width of the contactor is 85 mm, and it offers a degree of protection rated at IP20. The control voltage (AC) ranges from 176-242Vac (220Vac nom.; 50Hz; 0.8...1.1 x Uc) to 187-242Vac (220Vac nom.; 60Hz; 0.85...1.1 x Uc), with a rated operating voltage (Ue) of 1000 V. It includes 1 normally open (NO) auxiliary contact and 1 normally closed (NC) auxiliary contact, both of the instantaneous type (1NO+1NC). The rated impulse voltage (Uimp) is 8 kV. This contactor is capable of handling rated active power ranging from 25kW (220-230Vac; AC-3) to 55kW (500Vac; AC-3), with specific ratings for various voltages up to 1000Vac. It also supports rated power (HP) for motors from 7.5HP (115Vac; single-phase) to 60HP (575-600Vac; 3-phase), under UL/CSA standards. The mechanical durability of the LC1D95M7 is rated at 4,000,000 operations, and its electrical durability (with load) is rated at 1,200,000 operations. The rated voltage (AC) for phase-to-phase connections is 1000 V.

17 in stock
MGN61508 on Powermatic Associates

MGN61508

Schneider Electric

Schneider Electric MGN61508 is a Miniature Circuit Breaker (MCB) designed for DC applications. It falls under the C60H-DC sub-range and features a rated current of 10A with a rated voltage of 250V DC. This MCB is equipped with 1 pole that is protected and utilizes a C tripping curve.

32 in stock
NSYTRACRE24 on Powermatic Associates

NSYTRACRE24

Schneider Electric

Schneider Electric - NSYTRACRE24

30 in stock
M9F43303 on Powermatic Associates

M9F43303

Schneider Electric

Schneider Electric M9F43303 is a Miniature Circuit Breaker (MCB) within the C60BP sub-range, designed with a 3-pole configuration. It has a rated current of 3A and features a rated insulation voltage (Ui) of 500V. This MCB operates with a rated voltage of 60Vdc and has a rated impulse voltage (Uimp) of 6kV. It offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 60Vdc. The rated voltage for AC applications is 240V phase-to-neutral and 415V phase-to-phase. All three poles are protected, and it is equipped with a D tripping curve.

5 in stock
VW3A9921 on Powermatic Associates

VW3A9921

Schneider Electric

Schneider Electric VW3A9921 is an adapter designed for direct circuit breaker mounting. This mechanical adapter kit facilitates the integration of components by providing a compatible interface for secure and straightforward installation.

12 in stock
M9F53220 on Powermatic Associates

M9F53220

Schneider Electric

Schneider Electric M9F53220 is a Miniature Circuit Breaker (MCB) within the C60BPR sub-range, designed with a 2 Pole configuration and a rated current of 20A. It features a rated insulation voltage (Ui) of 500 V and a rated impulse voltage (Uimp) of 6 kV. The M9F53220 offers a short circuit breaking rating of 14kA AIR at both 120Vac and 240Vac, and 10kA AIR at 480Y/277Vac and 125Vdc. It supports a rated voltage (AC) for phase-to-phase connections up to 440 V and has 2 protected poles. The tripping curve for this MCB is classified as D.

1 in stock

Manufacturer warranty

ATV212WD22N4C Schneider Electric

Get a quick Quote!

Request a quote, and we will send you price and availability within minutes.

Select Qty:

Average response time: 11 minutes

Worldwide Shipping and Delivery

Secure Payment Processing

Warranty

Responsive Customer Support

Got Questions? We've Got Answers!

Need more details?

Feel free to chat with us

About the manufacturer

Schneider Electric

Powermatic Associates is an authorized Schneider Electric distributor, proudly offering a diverse portfolio of innovative solutions tailored to meet the dynamic needs of today's industrial landscape. Schneider Electric stands as a global leader in energy management and automation, providing cutting-edge products and services that drive efficiency and sustainability across a variety of sectors. The...

Recently viewed products

M-2218-3.0ES500 on Powermatic Associates

M-2218-3.0ES500

Novanta IMS

Novanta IMS M-2218-3.0ES500 is a 2-phase DC stepper motor within the Stepper motors sub-range, featuring a 500-line single-end optical encoder with an index mark and a smooth shaft with a single flat (single shaft end) single (1) motor stack. It is designed with bare end flying leads for connection, operates on a rated current of 3A, and supports a supply voltage range of 24Vdc-75Vdc, including 48Vdc, 60Vdc, and 72Vdc options. This stepper motor is equipped with a 57x57mm flange for mounting, can operate in ambient air temperatures ranging from -25 to +40°C, and has a moment of inertia of 0.12kg.cm^2. It delivers a stall torque of 71N.cm (100oz-in) and can be stored in temperatures ranging from -25 to +70°C. The motor offers a resolution of 1.8° step angle.

0 in stock

Relevant products

ATV212WU22N4C on Powermatic Associates

ATV212WU22N4C

Verified stock: 0

Schneider Electric ATV212WU22N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control (standard / energy saving) capable of delivering 120% of the nominal motor torque. It features a built-in EMC filter (class C1) within an enclosed assembly and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). The dimensions of this unit are H297mm x W215mm x D192mm, and it offers a degree of protection rated at IP55 UL type 1. The rated current is 5.1A (460Vac; 12kHz) with a maximum current of 5.6A for 60 seconds. Designed for wall mounting, it supports communication protocols such as Modbus, Metasys N2, Apogee FLN, and BACnet over a 3-phase network with an output frequency range of 0.5-200 Hz. It includes 1 analog output (0-10Vdc / 0-20mA), multiple digital inputs (24Vdc; sink/source), and digital outputs (C/O SPDT relay contact and NO relay contact), alongside 1 analog input (0-10Vdc / 0-20mA / 4-20mA) and 1 analog input (0-10Vdc / PTC). The current consumption is 4.6A at 380Vac and 3.7A at 480Vac, with a rated active power of 2.2kW and rated power of 3HP.

Schneider Electric

ATV212WD45N4C on Powermatic Associates

ATV212WD45N4C

Verified stock: 0

Schneider Electric ATV212WD45N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series. It features a U/F ratio (2 points / energy saving), sensorless flux vector control (standard / energy saving), and delivers 120% of the nominal motor torque. This model comes with a built-in EMC filter (class C1) and is designed as an enclosed assembly. It operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.), with dimensions of H880mm x W284mm x D343mm, and offers a degree of protection of IP55 UL type 1. The rated current is 94A (460Vac; 8kHz) with a maximum current of 103.4A for 60 seconds. It is designed for wall mounting and supports communication protocols such as Modbus, Metasys N2, Apogee FLN, and BACnet, over a 3-phase network with an output frequency of 0.5-200 Hz. The device includes 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), and 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). Current consumption is rated at 83.8A (380Vac) and 65.9A (480Vac), with a rated active power of 45kW and rated power of 60HP.

Schneider Electric

FAQ

Out if stock but available for backorder.

Schneider Electric ATV212WD22N4C is a Variable Speed/Frequency Drive (VSD/VFD) / Inverter from the Altivar 212 series designed for variable speed and frequency control with a U/F ratio (2 points / energy saving) and sensorless flux vector control. It features a built-in EMC filter (class C1) within an enclosed assembly and operates on a supply voltage of 323-528Vac (380Vac / 400Vac / 480Vac / 500Vac nom.). The dimensions are H720mm x W284mm x D315mm, and it has a degree of protection of IP55 UL type 1. The rated current is 43.5A (460Vac; 8kHz) with a maximum current of 47.9A for 60 seconds. It supports wall mounting and uses the Modbus, Metasys N2, Apogee FLN, and BACnet communication protocols. This 3-phase network device outputs frequencies from 0.5-200 Hz and includes 1 analog output (0-10Vdc / 0-20mA), 3 digital inputs (24Vdc; sink/source), 2 digital outputs (1 C/O SPDT relay contact and 1 NO relay contact), and 2 analog inputs (0-10Vdc / 0-20mA / 4-20mA and 0-10Vdc / PTC). The current consumption is 41.1A at 380Vac and 33.1A at 480Vac, with a rated active power of 22kW and rated power of 30HP.

Similar products from: Industrial Automation Components

This item can ship within 24h!

EX-13EA on Powermatic Associates

EX-13EA

Verified stock: 44

Panasonic EX-13EA is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor is characterized by an IP67 degree of protection, ensuring its operation in various environmental conditions. It emits red light with a wavelength of 680 nm and can detect opaque objects as small as 2mm / 0.079". The EX-13EA features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". For protection, it includes outputs short-circuit protection. This ultra-slim photo-electric sensor emitter+receiver pair is designed for side sensing with built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

Panasonic

This item can ship within 24h!

EX-13A on Powermatic Associates

EX-13A

Verified stock: 8

Panasonic EX-13A is a photo-electric sensor designed with a polyethylene terephthalate housing and a polyalylate lens. It operates with a current consumption of 10mA / 0.01 A for both the emitter and receiver. This sensor offers a degree of protection rated at IP67 and emits red light with a wavelength of 680 nm. It is capable of detecting opaque objects as small as 2mm / 0.079". The EX-13A features an orange LED that lights up when the output is ON and a green LED that indicates a stable light received or stable dark condition. It has a rapid response time of 0.5ms / 0.0005 s and includes 1 digital output (NPN open-collector / 24Vdc / 50mA). The operating mode is Light-ON, and it has a sensing distance of 0.5m / 50cm / 500mm / 19.685". This sensor is equipped with output short-circuit protection and is described as an ultra-slim photo-electric sensor emitter+receiver pair with front sensing and built-in amplification. It comes pre-wired with a 2m 3-core (2-core on emitter side) 0.1mm2 flexible cabtyre cable terminated with bare end flying leads.

Panasonic

This item can ship within 24h!

DP-102-M on Powermatic Associates

DP-102-M

Verified stock: 43

Panasonic DP-102-M is a dual display digital high pressure sensor designed for air and non-corrosive gases, featuring a main function as a sensor with pressure detection capabilities. It offers 1 x analog output (1-5Vdc / 4-20mA) and 2 x digital outputs (NPN open-collector / 24Vdc / 100mA) with comparative outputs 1 & 2, including an orange LED as a visual position indicator. The degree of protection provided is IP40, ensuring a basic level of protection against solid objects. It includes protection functions such as outputs short-circuit protection. The sensor supports various comparative output operations (NO / NC selectable by key) and modes (EASY mode / Hysteresis mode / Window comparator mode), with a comparative output response time ranging from 2.5ms to 1000ms selectable. Connection is facilitated through an M5 threaded port plus a 2m cable with connector. Measurement accuracy is highlighted by comparative output repeatability of (+/-0.2% F.S.). The display features a 4-digit LED display alongside a 4-digit red / orange / green LED display for clear and precise readings.

Panasonic

What can I help you find today?

Recommended parts

PAXT0010 on Powermatic Associates

PAXT0010

Red Lion

Red Lion PAXT0010 is a universal digital temperature meter part of the PAX series, designed with 3 user inputs in a 1/8 DIN horizontal configuration measuring 96mm by 48mm with 14.2mm green digits and communication capability. It operates on a supply voltage of 85-250Vac, accommodating a wide range of AC inputs including 100Vac, 110Vac, 120Vac, 200Vac, 208Vac, 220Vac, 230Vac, and 240Vac. This thermometer offers an IP65 NEMA 4X degree of protection, ensuring durability in various environments. It features a 20Hz analog input sampling rate and includes 1 analog input supporting 4-20mA, 0-20mA, 0-10Vdc, multiple thermocouple types (T, E, J, K, R, S, B, N, C), Pt100, and Ni120 RTDs DC with 16-bits conversion and an accuracy range of 0.12% to 0.7%. Additionally, it is equipped with 3 digital inputs (Sink/Source) for user input and 1 analog output for retransmission purposes.

1 in stock