ATV320D15M3C Schneider Electric Industrial Automation Components

Product Details

• Acceleration And Deceleration Ramps
  Linear U S CUS Ramp switching Acceleration/deceleration ramp adaptation Acceleration/deceleration automatic stop with DC injection
• Option Card
  communication module, CANopen communication module, EtherCAT communication module, Profibus DP V1 communication module, Profinet communication module, Ethernet Powerlink communication module, EtherNet/IP communication m
• Relay Output Type
  Configurable relay logic R1A 1 NO 100000 cycles Configurable relay logic R1B 1 NC 100000 cycles Configurable relay logic R1C Configurable relay logic R2A 1 NO 100000 cycles Configurable relay logic R2C
• Protection Type
  Input phase breaks drive Overcurrent between output phases and earth drive Overheating protection drive Short-circuit between motor phases drive Thermal protection drive
• Asynchronous Motor Control Profile
  Voltage/frequency ratio, 5 points Flux vector control without sensor, standard Voltage/frequency ratio - Energy Saving, quadratic U/f Flux vector control without sensor - Energy Saving Voltage/frequency ratio, 2 points
• Maximum Switching Current
  Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 250 V AC Relay output R1A, R1B, R1C resistive, cos phi = 1 3 A 30 V DC Relay output R1A, R1B, R1C, R2A, R2C inductive, cos phi = 0.4 7 ms 2 A 250 V AC Relay output R1A, R1B, R1C, R2A, R2
• Motor Slip Compensation
  Automatic whatever the load Adjustable 0...300 % Not available in voltage/frequency ratio (2 or 5 points)
• Analogue Input Type
  AI1 voltage 0...10 V DC 30 kOhm 10 bits AI2 bipolar differential voltage +/- 10 V DC 30 kOhm 10 bits AI3 current 0...20 mA (or 4-20 mA, x-20 mA, 20-x mA or other patterns by configuration) 250 Ohm 10 bits
• Discrete Input Type
  STO safe torque off, 24 V DC1.5 kOhm DI1...DI6 logic inputs, 24 V DC 30 V) DI5 programmable as pulse input 0…30 kHz, 24 V DC 30 V)
• Communication Port Protocol
  Modbus serial CANopen
• Analogue Output Type
  Software-configurable current AQ1 0...20 mA 800 Ohm 10 bits Software-configurable voltage AQ1 0...10 V DC 470 Ohm 10 bits
• Line Current
  79.7 A 200 V heavy duty) 67.1 A 240 V heavy duty)
• Discrete Output Type
  Open collector DQ+ 0…1 kHz 30 V DC 100 mA Open collector DQ- 0…1 kHz 30 V DC 100 mA
• Discrete Input Logic
  Positive logic (source) Negative logic (sink)
• Switching Frequency
  2...16 kHz adjustable 4...16 kHz with derating factor
• With Safety Function Safe Programmable Logic
  False
• Power Dissipation In W
  Fan 551 W 200 V 4 kHz
• Base Load Current At High Overload
  8.0 A
• Prospective Line Isc
  22 kA
• Maximum Output Voltage
  240 V
Brake Chopper Integrated
True
Network Frequency
50-60 Hz
Maximum Output Frequency
0.599 kHz
Transient Overtorque
170…200 % of nominal motor torque
Method Of Access
Slave CANopen
Analogue Input Number
3
Discrete Input Number
7
EMC Filter
Without EMC filter
[Us] Rated Supply Voltage
200...240 V - 15...10 %
Mounting Mode
Wall mount
With Safety Function Safe Torque Off (STO)
True
With Safety Function Safe Brake Management (SBC/SBT)
False
Nominal Output Current
66.0 A
Net Weight
15.21 lb(US) (6.9 kg)
Depth
7.80 in (198.0 mm)
Height
12.99 in (330 mm)
With Safety Function Safe Direction (SDI)
False
With Safety Function Safely Limited Position (SLP)
False
With Sft Fct Safe Stop 2 (SS2)
False
With Safety Function Safe Operating Stop (SOS)
False
Width
7.09 in (180 mm)
With Safety Function Safe Stop 1 (SS1)
True
With Safety Function Safe Speed Monitor (SSM)
False
With Safety Function Safely Limited Speed (SLS)
True
Relative Symmetric Network Frequency Tolerance
5 %
With Safety Function Safe Position (SP)
False
Apparent Power
27.9 kVA 240 V heavy duty)
Maximum Input Current Per Phase
79.7 A
Braking To Standstill
By DC injection
Synchronous Motor Control Profile
Vector control without sensor
Nominal Switching Frequency
4 kHz
4 Quadrant Operation Possible
True
Minimum Switching Current
Relay output R1A, R1B, R1C, R2A, R2C 5 mA 24 V DC
Analogue Output Number
1
Discrete Output Number
3
Motor Power Kw
15.0 kW heavy duty
IP Degree Of Protection
IP20
Range Of Product
Altivar Machine ATV320
Variant
Standard version
Product Or Component Type
Variable speed drive
Format Of The Drive
Compact
Product Specific Application
Complex machines